i7 10700k Overclocked. Let's Lower Voltages, Benchmark, and Run Prime 95 - Crash? MSI Z490 - Uncut
HTML-код
- Опубликовано: 22 авг 2024
- Check out my channel for more.
Link to this exact build: pcpartpicker.c...
I wanted to play with the voltages of the 10700k @5.1Ghz, to see what it took to crash my PC (so I filmed it). Well, Prime 95 of course.. It crashed, but no worries, back up and running. Hang out with me while I go through a few different voltage settings in the BIOS. This video is a lot longer than I had planned, and we're not done yet, but I had to end it. Now that I have a number to stay above, I want to go up in small increments to see where I can run small FFTs, and smallest FFTs without a crash. That video is coming up. Subscribe and turn on notifications, of course. Shot on my S20 Ultra.. Again =) 
Игры
If you're on the fence about purchasing a 10700k, and are curious of the silicon quality from a random sample (mine), I hope this helps, at least a little. I play with my CPU settings often, and just figured I would record this instance to share. Sorry it's so long. Different content is coming. Please suscribe if your curious. New videos weekly. I'm having a blast.
Great video!
Thanks my friend! Subscribe, and we'll try again. I had to cut the video since it started running so long, but there's way more to try. Have a great day.
Gavin sent me :)
My man
u never used load-line calibration voltage?
I just got my i7 10700k + MSI edge wifi same as yours, I will start testing today or tomorrow
That's great. You're right. I think I mentioned adjusting it, but I never did in the video. I plan on uploading a video, going through each LLC setting, to see the fluctuation in HWiNFO. Been a busy month for me, but more uploads are coming. I run LLC 3 daily btw.
@@TheSmileyTek thanku for ur replay, i will wait for your full video. I will try to get it to 5.3ghz with lower voltage HT off.
helo sir, i runing i7 10700k at 4.8 GHz ring ratio 4.3 and AVX Auto with 1.300 cpu voltage, temperature is going 45-55 idle and about 98 at gaming, can you help me how to decrease the temp?
what i miss from my BIOS setting ? im not good overclocker, just for daily use and gaming, im using MSI Cooler Liquid 360mm now
That’s plenty of cooling. 98 gaming is high. Is it just a quick spike here and there? Check the Load Line settings. I set my Load Line Calibration (LLC) to Mode 3. Confirm your thermal paste application, and that your cooler is mounted with even pressure. Tighten in a cross pattern.
@@TheSmileyTek btw what is LLC ? can you give me simple explain ? if i use higher than mode 3 what happen ?
Sure, LLC tells the motherboard to provide a little more voltage to the CPU when it goes from Idle to Load. Setting LLC to a higher mode could allow the voltage to stay higher under load rather than dropping off, or "drooping". I was thinking a lower setting may keep your temps down, if it doesn't cause stability issues (aka a crash). In other words, maybe allowing the voltage to taper off under load could keep your temps lower. Higher voltage = higher temps. Although, it may just be the "silicon lottery". Not all CPUs can reach higher frequencies at lower voltages. So mileage may vary.
By the way, thank you very much for your video. I am trying to undervolt my i7 10700k With Motherboard ASUS ATX ROG STRIX Z490-E GAMING And the minimum voltage that I could put was 1,380 and it gave ceash when running cinebench r20 and so far I am in the test of 1,450 with prime 95 for 10 minutes I still cannot find the correct voltage no blue screen
NP. Thanks! I think I got lucky with this 10700K. It's been an excellent overclocker @ reasonable voltages.
It's true hahaha you are a crack thanks for making me try to do the subvolt I was scared a little, the maximum I managed to put was 1,480 and it does thermal throttling at 7 minutes prime 95 is quite rare since it is always at 60 degrees and reaching that time out of nowhere the temperature rises to 100 degrees and that's when most tests give blue screen but this voltage only makes thermal throttling I guess it's the minimum voltage I can :(
@@zero00000ism Man, that voltage is a lot for the 10700k. Try to put the voltage to 1,36V and change LLC to see what happens.
Small fft prime95 is brutal it's like 125% usage of your CPU plus it looks like you were running AVX which is even worst large ffts is where it's at or realbench or just stick to 3dmark Call of Duty war zone extended play time is also a good stress test
You're right. Just figured I'd see what would happen. I was surprised it didn't thermal throttle. I think it only hit 99C. 1 more degree though, and it would've pulled back. That'll be the only time I run small FFT AVX. My plan was, if it were to mess the CPU up somehow, I would've just upgraded to the 10900k 🤣. I've been really impressed with the silicon quality in my 10700k. It's been great. I got lucky.
Im new to this, and im stumped on voltage. My 10700kf is at 5.08mhz but the core is .80v !
Do i need to raise it?
Temp avg 30-50c, up to 77c, 100c cpu-z stress temp. 3 chassis fans, 1 cpu fan.
Asus h570 plus prime, iolo 16gbx2 (32ghz), Nvidia p400x2, team 1tb ssd m.2
🤔. You're running 5.08Ghz @ 0.80V? That's pretty dang impressive to be honest. That's a pretty low voltage. The higher you raise the voltage, the temps will potentially be higher as well. When you say 1 CPU fan I assume you're air cooling, which is fine, but you wouldn't want to skimp on a quality air cooler if you're overclocking. What CPU cooler are you using?
Hey what rev is your gaming edge wifi ? I mean on CPU-Z on mainboard category, right on right side to the model name what number is ?
I just now saw your comment. My bad. I will take a look tonight when I get home, and let you know. I thought I had a picture from registering the MB, but I guess I don't.
BTW.. Model: MPG Z490 GE WiFi 1.0
Chipset: Comet Lake Rev. 05
Southbridge: Z490 Rev 00
@@TheSmileyTek Thnk you, yeah I was talking about MB version the 1.0, looks like at the moment they make only one version of it, cuz all of them are first version
I bought the 10700k within 5 minutes of release and the MB directly after. Definitely the first ones off the "press". Same with my S20 Ultra. Received it 2 days before the release date. Always a little risk grabbing the first revs. So far so good though.
how doo you get the voltage stay so static . if i even use static voltage still jumps around .
It fluctuates a little on me, but I set my "Load Line Calibration" to "Mode 3". That seems to give me pretty steady voltage. Have you tried LLC set to 3?
Damn I'm late. What is your daily voltage atm? And definitely better to manually oc gpu. OC scanner gave me a 20oc but manual I was able to go with 115core clock so far stable with heaven benchmark
I run at 5Ghz, Dynamic. I set Vcore at 1.322v and I get max vcore of 1.326v. No doubt OC Scanner shorted me a little. If I try +115 I get a Direct X 12 error after a few multiplayer games of MW. Guess it's the price I pay going with the Founders Edition GPU.
@@TheSmileyTek ahh ok. Nice. Thanks for reply.
@@TheSmileyTek Forgot to ask but what software do you use for stress testing?
Same as most. I throw 4 Cinebench R20s at it, and run Aida64 for as long as I can manage. As long as it survives my gaming, and video rendering, it's stable enough for me. Game Boost wasn't even stable when I tried it out of the box, which is weird, but it's yet to crash on me after the OC.
@@TheSmileyTek solid, I use Aida and occt. Do you have an AVX offset?
Can u do undervolt for this cpu
Why are you running AVX, that's pointless.
Curiosity
Brother could you pass me your silicone section home screen wallpaper
BTW, I use Bing to search for my wallpapers. Saving down images is one of the things that Bing actually makes easier than Google. I think this is it: hdqwalls.com/download/circuit-cpu-chips-bx-2560x1440.jpg
Thank you very much I appreciate the advice and thank you for the wallpaper is very pro hahaha
Interesting. Do you use it 5.1GHz and 1.3V for daily use?
I've been running 5.0Ghz @ 1.315 for almost a year, X73 NZXT AIO max gaming temps on CPU 67C, and max temps on RTX 3070 71C with +105mhz clock OC and +500mhz memory OC. My RTX 3070FE doesn't OC very well 🙄
@@TheSmileyTek I've bought a 10700k and I'm using it 5.1GHz with AVX Offset -1 with 1,3V and LLC3. I get 84°C while rendering with AVX on Revit. Do you think that's safe for daily use? The cooler is a cooler master Masterliquid ML240L v2
I'd imagine that 84deg temp is just for short runs? Should be fine. Those temps are within spec, but the lower the better of course.
@@TheSmileyTek Yeah, Just when rendering. In daily use It is from 65°C to 71°C. When rendering it gets 84°C.