You need to reduce drag. The antenna could be incorporated into the vertical stabilizers, making one less drag surface. Also, the body mounts and clips could be inverted so the towers and clips are upside down and behind the wheels, making four fewer drag surfaces. Finally, airplanes have cowls on their wheels for a reason. Extend the skirt of the body to encompass the rear wheels and taper it towards the rear (you could, with sufficient planning, cowl the steering wheels, but probably won't). Those changes will give you a total of seven drag reductions. Best of luck!
Absolutely. Every little thing. Painting B-17’s in World War II made them faster because it filled in gaps at the rivets & seams. They just didn’t paint them so they could get them off the production line faster, which is what really mattered at the time.
Im also thinking about the aesthetic of the body. The fake cockpit and all those louvers and such. Perhaps a completely featureless and streamlined body would do wonders.
Raz Have you thought about bringing 2 ladders and a board to stand up high that way you can get a longer run and see the car better? I see all the guys going for the record either standing on a ladder or the bed of a big truck to get a height advantage so they can get a longer run-up. When we race the driver's stands are up real high so we can see the corners of the track. You should try it. Might be that extra edge you need to break 200+ mph.
Aircraft style running lights so you know which way it's pointed may help as well. A buddy used to paint his high speed planes in odd blocks of colors so he could tell the planes orientation at distance. Not pretty, but he found it effective.
@@donaldrieger381 trying to keep weight down might be the issue. However, putting high-vis reflective tape (different reflective frequencies for front and back) and shining high-output lights down the track would serve the the same purpose adding only a few grams to the build.
just a thought Raz, you said its always the front right tyre blowing out, thats the same side the servo is on, maybe try a dual servo setup on steering to better balance steering at high speed. everything is equally balanced front to back of the car except the steering servo!
Back in 1998 when i was into rc Cars, a car that could reach between 40 to 50 miles, was the absolute King.. 😂😂😂 can't Imagine how far this game goes... Keep it up!! Might be so hard to see/control at this crazy speeds!!
We were doing 80mph+ in 1989 w/ pan cars (RC10L). This was matched NiCd cells, 10 turn brushed motors (Twister for me) & Novak T1x speed control. I still have the whole setup. Pan cars are very squirily (2WD in general) it was difficult and couldn’t go too much faster and maintain control.
I have a little question. Why not build yourself a little stand, that you could be like 1m up, or more, when driving. You've have slightly better view on the car, and us viewers would also see a bit better as the car is approaching. Theres a reason races are also usually from a drivers stand, as it helps with seeing the car. Obviously I've never ran a speed-run, but just a thought. :) Anyway, love the videos as always.
I wonder if having a squib that deploys a parachute (only if it goes inverted) would save on some parts without adding too much weight? lol, or a Co2 cartridge that deploys a beach ball around it...
The beach ball wouldn't work in practice, but you're on the right track. Accelerometers mounted near each wheel that if any detects violent shaking deploys a chute from the rear would mitigate damage and costs, for sure.
Wow, he’s serious about RC cars building. Really hope that you break the record with a fat amount of mph so it becomes as close to impossible to break long time after if it is even approachable from there. Thanks for sharing this.
Damn Raz, you're so close to the goal and I can't wait to see you smash the record. The Bashing series Li-Po's are a lot better than people think. They are the only Li-Po's I've got and I've personally never had a problem with them.
I bought two of your monster servos from perfect pass and omfg. No joke omfg these are the best god dam servos on the planet. If only I had these years ago. My RC’s drive so fucking straight and respond so fucking quick omg. Thank you!!!!!!!!
I love watching these vids, your attention to detail and quality of build is an artform all by itself. I have no idea if this is even possible or not, but is there a way to gather additional telemetry on your high-speed runs? I appreciate there are probably very few telemetry sensors available for RC vehicles but I feel if anyone can make it happen, Raz can! It would be really interesting to understand more about the forces exerted on a scale model at these speeds, and I for one would love to understand more about the physics involved.
You can hear it bottoming out on the ground. Might be beneficial to raise the ride height 1/2 a millimeter on the front and 3/4 of a millimeter in the rear. The rake angle will help maintain the current level of downforce and stability and should stop the bottoming out.
Love the content, I built a dual motor rc speed car several years ago and never tested it. I was going for a record and then lost interest, hope you hit the world record as you are the king of rc speed! you officially are the king of rc speed! congrats!
With builds that expensive, you really should get two guys hanging out the back of the car with leaf blowers and make a couple passes to clear the road off every now and then.
Raz, I love your videos! You drive me to pick up a limitless roller, unfortunately my first set up has blown an esc I feel. Any ideas what a flashing code of two quick yellow / one long yellow means on a Mamba Monster X is? I had steering but no throttle / major cogging. The motor is still good.
I'm loving these carbon fiber driveshafts, saving me a lot of headaches. I have 3 sets installed so far. I've already experienced the alternatives; bent out titanium version during g a run and stock, luckily it didn't tear everything up.. I appreciate what you do!
WOW!! THANK YOU SO MUCH KEN! Dude..Actually, this is the first time i ever got a super thanks! made my day, thank you so much! Also, I'm happy you like them!
@@RazShifrin Right on man, I'm surprised others haven't (YET). As you know our time is a non-renewable resource, and you my friend have put in the time, effort & patience to make our experiences better. Thanks again brother.
@@zachdillon275 he uses a nice gyro for the steering and a device he invented called perfect pass “available on Amazon” to control how fast he accelerates.
I use Velcro straps to hold the batteries down. I haven't got close to your speeds, but I do think they would have held your batteries in place for that wreck and I'm pretty sure they're lighter weight. My cut outs to allow them are through the chassis so my straps are outside, but I don't think it's necessary
This is amazing. Had no idea RC cars could go anywhere near this fast. For something this precise and risky I'd want to hire one of those big streetsweepers and wash the road clean first.
I haven't watched this through to the end yet before commenting, so you might give all the stats at the end of the video, like 0 to 60, 0 to100, and the distance it takes to reach 200mph, but I would love to see the statistical comparison to a real full scale dragster, and what it could compete with to the nearest FIA, or NHRA class. Would it do a full quarter of a mile without getting too hot? What time do you think it could do a full quarter of a mile in?
Nice run 👍👍clean smooth and knock'n on that door!!! Only in my dreams would my dual motor go that fast....maybe one day lol nice work , beautiful build as always and good luck🤔 202 next run....you got this!
I LOVE the 4 motor configuration. If you ever want to collaborate reach out. We do lots of rapid prototyping on our channel and would love to partner on such unique content.
I bought my monster servo as a birthday present for myself. Got to put it in my kraton this week. My wife and kids bought me the 3s infraction blx, it was a great b- day. I'm hoping perfect pass comes out with some carbon fiber parts for the 3s line-up
Food for thought.....have a buddy down where you think the pass will end, really really helps with spotting as well as retrieving cars on their way to charcoal briquette status.
I'm wondering if a rudder steering setup instead of front wheels would benefit you when destroying wheels. You could potentially save destroying the car by being able to steer using the aero
@@Shadow__133 I don't see how.... The body shell is already using "aerodynamic forces" Sticking a rudder on something doesn't make it an aircraft.... Active aero is a real thing used on real cars....
@@MaNNeRz91 I thought rudders were used in boats and planes, not cars. But sure, might as well put an afterburner powerplant and canards while you are at it, I'm sure it will go faster!
@@Shadow__133 I see you're talking out your arse so I'll let you carry on with that and briefly enlighten you to the fact that many modern supercars use some form of wing that acts like a rudder or air brake which in turn acts as a stabiliser.... Let me guess you can't use rear wings because its called a wing and only planes, rockets and birds have wings.... 🤔🤔
@@MaNNeRz91 Your lack of knowledge is evident when you fail to realize that a rudder on a vertical stabilizer is used for yaw. Why a car would need that is beyond anyone else's compression, because only you thought about that. "Jenius"! But do go on, pretty soon you'll realize you are planning to make a flying car.... or an airplane car.
I'm not sure exactly if it would be beneficial or not but have you looked into a slow draw capacitor instead of potentially heavier batteries especially if only needing enough power for a run or two
That’s one stunning build. It looks like a factory kit! So so close, a bit more fettling, better batteries and I think you’ll get it. Then you’ll have to go for it officially right? With Guinness there to record it.
Going in a straight line is one thing , it might be interesting to see this beast on a track, maybe a 1:5 track or a go cart track so it could unleash itself a little :D
@Raz Shifrin I can’t remember if you’ve said something about it but have you considered perfect pass limitless/infraction front/rear axles or cvd’s…. Might be a tad more involved trying to make CF cvd’s but I have faith…. Just a thought
For the car that exploded the front right at 4:52, was that the second pass on the same tires? In other words, are shaved foams only good for one high speed pass? (>180 mph)
Great build as always. Sucks about the lipo shortages. Quick question tho, do you think your burn outs just before the pass might be chewing up your foams? I know you’re probably trying to heat up the packs and tires, but that’s a dangerous move IMO. Love your content and wish you the best. 🤘🏻
I just paused the video halfway through to go on Amazon to order 2 perfect pass servos! We shall see how they do in 1/8 Electric Off-road racing here in America
Instead of driving it to starting point, try carrying it by yourself to starting point to save every tiny bit of battery No idea that it will help or not but it doesn’t cost anything to try it😄
Great video! New to the channel. Just a suggestion. Have you considered buying a "street sweeper"??? They make portable ones that you can push for a few hundred bucks. They might make ones that can attach to a truck (like a plow attachment). It would definitely be worth an investment!
Everything You Need Is Here..
www.perfectpassrc.com/
raz will get the record soon!!
When are you going to meet Raz?😁
he will get the record and then you will smash it after
Just came here after watching your video 78mph on your first drive
@@saadgul4753 me too hahaha
YOU GOT SOME CATCHING UP TO DO ;)
You need to reduce drag. The antenna could be incorporated into the vertical stabilizers, making one less drag surface. Also, the body mounts and clips could be inverted so the towers and clips are upside down and behind the wheels, making four fewer drag surfaces. Finally, airplanes have cowls on their wheels for a reason. Extend the skirt of the body to encompass the rear wheels and taper it towards the rear (you could, with sufficient planning, cowl the steering wheels, but probably won't). Those changes will give you a total of seven drag reductions. Best of luck!
Same
Absolutely. Every little thing. Painting B-17’s in World War II made them faster because it filled in gaps at the rivets & seams. They just didn’t paint them so they could get them off the production line faster, which is what really mattered at the time.
Carbon shields RF. He may be able to keep it in the body, if range isn’t an issue.
Reduce weight
Im also thinking about the aesthetic of the body. The fake cockpit and all those louvers and such. Perhaps a completely featureless and streamlined body would do wonders.
Raz Have you thought about bringing 2 ladders and a board to stand up high that way you can get a longer run and see the car better? I see all the guys going for the record either standing on a ladder or the bed of a big truck to get a height advantage so they can get a longer run-up. When we race the driver's stands are up real high so we can see the corners of the track. You should try it. Might be that extra edge you need to break 200+ mph.
Or... he could just pull the trigger nonstop, and hope the GPS survives... 😆
@@dwaynewilliams3077 LOL just replied more or less the same. Well, maybe if there's many with this idea, perhaps he'll consider! :D
Aircraft style running lights so you know which way it's pointed may help as well. A buddy used to paint his high speed planes in odd blocks of colors so he could tell the planes orientation at distance. Not pretty, but he found it effective.
Roof rack on any vehicle would suffice.
@@donaldrieger381 trying to keep weight down might be the issue. However, putting high-vis reflective tape (different reflective frequencies for front and back) and shining high-output lights down the track would serve the the same purpose adding only a few grams to the build.
just a thought Raz, you said its always the front right tyre blowing out, thats the same side the servo is on, maybe try a dual servo setup on steering to better balance steering at high speed. everything is equally balanced front to back of the car except the steering servo!
Also safer lest any one servo short/spaz out.
"It's just Gens ACE!!" - Raz Shifrin (c).
99% of community can only dream about batteries like those Gens 😂😂😂
Back in 1998 when i was into rc Cars, a car that could reach between 40 to 50 miles, was the absolute King.. 😂😂😂 can't Imagine how far this game goes... Keep it up!! Might be so hard to see/control at this crazy speeds!!
We were doing 80mph+ in 1989 w/ pan cars (RC10L). This was matched NiCd cells, 10 turn brushed motors (Twister for me) & Novak T1x speed control. I still have the whole setup. Pan cars are very squirily (2WD in general) it was difficult and couldn’t go too much faster and maintain control.
when you consider the RC glider speed record is over 500mph it gives some vague idea of how far this might go
@@bcastromusic lol they were like 30mph cars stock out the box... you'd throw your soul into them to get them to speeds a stock bandit will do lol.
Laugh my ass off for people with way too much money and too much time on their hands you are so blessed I work really hard for a cheap RC car
No one deserves the record more than you Raz! Absolute works of Art 👏👊
Kevin Talbot doesn't stand a chance to ever beat your amazing cars. The time/attention and passion that goes into these builds is fenominal.
Kevin obviously knows that.. he’s just having fun installing a ton of power and seeing what it can do. Raz has true desire and passion for this
2 different approaches, more fun.
He may not out run them, but if you want to truly see an RC bashed to its abosolute limit....theres no place like Talbots shop lol
Raz wins on just having way more class.
I have a little question. Why not build yourself a little stand, that you could be like 1m up, or more, when driving. You've have slightly better view on the car, and us viewers would also see a bit better as the car is approaching. Theres a reason races are also usually from a drivers stand, as it helps with seeing the car. Obviously I've never ran a speed-run, but just a thought. :) Anyway, love the videos as always.
Also you wouldn't loose your legs in case the car swerves into you
You and Kev must have been talk lol y'all posted so close together. Two speed run videos on Saturday morning. I love it!
They must talk they're good friends they're trying to beat the record like together so yeah I'd say they both knew they was going out geesh
Kevin mentioned in his video that Raz recommended some parts for Kev's car.
That's what I love about both of them.
The support.
I wonder if having a squib that deploys a parachute (only if it goes inverted) would save on some parts without adding too much weight? lol, or a Co2 cartridge that deploys a beach ball around it...
The beach ball wouldn't work in practice, but you're on the right track. Accelerometers mounted near each wheel that if any detects violent shaking deploys a chute from the rear would mitigate damage and costs, for sure.
Your a rockstar...Your so calm and mellow when you wreck a car..🤙 I freak out and curse like a sailor when I crash one of my helicopters.
I just love the passion you put into the hobby and how much you want everyone to be part of it❤️
Nice vid brotha! That’s one hell of a first pass AND with bashing batteries?!
198 mph, dropping to 22.x volts on basher lipos. Un...freaking...real...Raz, this car is flat out scary...💪💪💪
Wow, he’s serious about RC cars building. Really hope that you break the record with a fat amount of mph so it becomes as close to impossible to break long time after if it is even approachable from there. Thanks for sharing this.
I love that there is no bullshit in this video. Just straight to the point.
Brilliant, craftsmanship Raz, we are all cheering for you, you are almost there. 207 mph next run. Go go go. John
Put a 360 cam in it it would look sick
רז נהניתי מכל רגע לצפות למרות שאני מטיס ולא בתחום הרכבים .. כל הכבוד על ההשקעה 💪
Damn Raz, you're so close to the goal and I can't wait to see you smash the record. The Bashing series Li-Po's are a lot better than people think. They are the only Li-Po's I've got and I've personally never had a problem with them.
I bought two of your monster servos from perfect pass and omfg. No joke omfg these are the best god dam servos on the planet. If only I had these years ago. My RC’s drive so fucking straight and respond so fucking quick omg. Thank you!!!!!!!!
This is serious business, not for amateurs
Great video, Raz. I can almost feel your tension on the speed run. You'll do it, I'm sure. Keep up the great work :)
I love watching these vids, your attention to detail and quality of build is an artform all by itself. I have no idea if this is even possible or not, but is there a way to gather additional telemetry on your high-speed runs? I appreciate there are probably very few telemetry sensors available for RC vehicles but I feel if anyone can make it happen, Raz can! It would be really interesting to understand more about the forces exerted on a scale model at these speeds, and I for one would love to understand more about the physics involved.
Mega Pass !! 💪 Well Done Massive Voltage Drop 🤯🤯
Totally ruined the surprises thanks.
Thanks for ruining it 🙄
@@tomjohnson5713 watch it first then read the comments ✌️
@@rccarsandstuff4690 Watch the video before reading the comments 👍
#TeamOnyx when you getting the Onyx 8000mah packs ? Come and have a go with mine at Rossa
You can hear it bottoming out on the ground. Might be beneficial to raise the ride height 1/2 a millimeter on the front and 3/4 of a millimeter in the rear. The rake angle will help maintain the current level of downforce and stability and should stop the bottoming out.
It's porpoising like F1-Cars...
stiffening the suspension as well would help
Man, you guys are brave standing around with no barrier protection. One crash could kill someone!
It’s not brave, it’s stupid.
Love the content, I built a dual motor rc speed car several years ago and never tested it. I was going for a record and then lost interest, hope you hit the world record as you are the king of rc speed! you officially are the king of rc speed! congrats!
I love watching these speed videos. It's got to be such a rush doing that in person!
"this is the most powerfull engine you can buy ... so i strapped 4 of them"
sir, i got to say, i truelly love your spirit ;)
With builds that expensive, you really should get two guys hanging out the back of the car with leaf blowers and make a couple passes to clear the road off every now and then.
Brilliant. Even other content creators respect your diligence. At those speeds, any mishap becomes a yard sale. Carry on, sir. We'll keep watching.
AWQESOEM Raz! Soooo close! You will raise the bar very soon! 💪👍
Raz, I love your videos! You drive me to pick up a limitless roller, unfortunately my first set up has blown an esc I feel. Any ideas what a flashing code of two quick yellow / one long yellow means on a Mamba Monster X is? I had steering but no throttle / major cogging. The motor is still good.
Imagine breaking the speed record when Kevin Talbot comes to visit 🙂 Looking forward to more vids Raz !
I'm loving these carbon fiber driveshafts, saving me a lot of headaches. I have 3 sets installed so far. I've already experienced the alternatives; bent out titanium version during g a run and stock, luckily it didn't tear everything up.. I appreciate what you do!
WOW!! THANK YOU SO MUCH KEN! Dude..Actually, this is the first time i ever got a super thanks! made my day, thank you so much! Also, I'm happy you like them!
@@RazShifrin Right on man, I'm surprised others haven't (YET). As you know our time is a non-renewable resource, and you my friend have put in the time, effort & patience to make our experiences better. Thanks again brother.
@@Ken_412 You're welcome, thank you!
Pinned🙏🏻
How can you keep that thing straight and control it going that fast?
@@zachdillon275 he uses a nice gyro for the steering and a device he invented called perfect pass “available on Amazon” to control how fast he accelerates.
I use Velcro straps to hold the batteries down. I haven't got close to your speeds, but I do think they would have held your batteries in place for that wreck and I'm pretty sure they're lighter weight. My cut outs to allow them are through the chassis so my straps are outside, but I don't think it's necessary
What knd of batteries are you waiting for? Ive been shopping for some good ones but not sure wich ones acually hav the power
That's insane.
I wouldn't be standing out in the open with that car rocketing by me at 200 mph.😯
Yeah sorry kev, i think Raz needs to build Kev a speed car. And kev can build raz a monster basher. Im really happy this run didnt end in tears.
That’s crazy fast 😳 Awesome to see that kind of speed!
This is amazing. Had no idea RC cars could go anywhere near this fast.
For something this precise and risky I'd want to hire one of those big streetsweepers and wash the road clean first.
Great run! that build is fantastic! World record is very close. Keep it up, I cant wait to see it
I haven't watched this through to the end yet before commenting, so you might give all the stats at the end of the video, like 0 to 60, 0 to100, and the distance it takes to reach 200mph, but I would love to see the statistical comparison to a real full scale dragster, and what it could compete with to the nearest FIA, or NHRA class. Would it do a full quarter of a mile without getting too hot? What time do you think it could do a full quarter of a mile in?
Dang I thought gen ace was good, so what’s a good battery to use?
Great job Sir, love watching you get closer and closer! Wishing you well and luck on the next run from the US brother!
Nice run 👍👍clean smooth and knock'n on that door!!! Only in my dreams would my dual motor go that fast....maybe one day lol nice work , beautiful build as always and good luck🤔 202 next run....you got this!
That car looks beautiful
198 is not amazing! You driving that thing at 198 is amazing ! Coming and going 198 lol you’re crazy
What a first pass my guy 👍👍👍👍
You have such passion brother... absolutely love it.
210+ mph coming soon to a deserted road near you 😂
Where is that aluminum piece from onto of the front splitter would love one of those.
You should put a tiny camera in the clear 'cockpit' of the car , would be cool to see everything going so fast and low to the ground.
Definitely gunna keep an eye out, gotta custom 6x6 hoping to get 80+ outta it, thanks for some ideas to get there with
I LOVE the 4 motor configuration. If you ever want to collaborate reach out. We do lots of rapid prototyping on our channel and would love to partner on such unique content.
James McCoy is the headliner of speed 😎 gitter done
For the first run, that’s impressive. You’re getting real close!
I know my screen is smaller than what your seeing but damn.... how can you possibly keep track of orientation?
I bought my monster servo as a birthday present for myself. Got to put it in my kraton this week. My wife and kids bought me the 3s infraction blx, it was a great b- day. I'm hoping perfect pass comes out with some carbon fiber parts for the 3s line-up
Tried hearing or seeing, but what are the tyre/wheel combination (brand, hardness) you are using??
Thanks 👍
Food for thought.....have a buddy down where you think the pass will end, really really helps with spotting as well as retrieving cars on their way to charcoal briquette status.
With great speed comes great destruction.
I'm wondering if a rudder steering setup instead of front wheels would benefit you when destroying wheels. You could potentially save destroying the car by being able to steer using the aero
If you are using aerodynamic forces airplane parts it's a low flying aeroplane.
@@Shadow__133 I don't see how.... The body shell is already using "aerodynamic forces"
Sticking a rudder on something doesn't make it an aircraft....
Active aero is a real thing used on real cars....
@@MaNNeRz91 I thought rudders were used in boats and planes, not cars. But sure, might as well put an afterburner powerplant and canards while you are at it, I'm sure it will go faster!
@@Shadow__133 I see you're talking out your arse so I'll let you carry on with that and briefly enlighten you to the fact that many modern supercars use some form of wing that acts like a rudder or air brake which in turn acts as a stabiliser....
Let me guess you can't use rear wings because its called a wing and only planes, rockets and birds have wings.... 🤔🤔
@@MaNNeRz91 Your lack of knowledge is evident when you fail to realize that a rudder on a vertical stabilizer is used for yaw. Why a car would need that is beyond anyone else's compression, because only you thought about that. "Jenius"!
But do go on, pretty soon you'll realize you are planning to make a flying car.... or an airplane car.
Very impressive, your passion and talent are inspiring . Keep it up!
Just along for the ride ....epic
I'm not sure exactly if it would be beneficial or not but have you looked into a slow draw capacitor instead of potentially heavier batteries especially if only needing enough power for a run or two
That’s one stunning build. It looks like a factory kit! So so close, a bit more fettling, better batteries and I think you’ll get it. Then you’ll have to go for it officially right? With Guinness there to record it.
פשוט מטורף אפילו לא ידעתי שיש בארץ תוכן כזה או אנשים שמגיעים לרמות שכאלה בתחום
Clean drift on beginning
Great build and speed. About your radio I see a bigger antenna. What mod do you make to use a bugger antenna? Or you has avudeo showing that?
Another awesome build Raz. Looking forward to more action from it.
Also happy belated birthday 🥳 buddy.
I would just like to know how do you keep on course my eyesight with it going that fast that far away?
Going in a straight line is one thing , it might be interesting to see this beast on a track, maybe a 1:5 track or a go cart track so it could unleash itself a little :D
This car is fast enough that,you could have two drivers. Rc jet racing
@Raz Shifrin I can’t remember if you’ve said something about it but have you considered perfect pass limitless/infraction front/rear axles or cvd’s…. Might be a tad more involved trying to make CF cvd’s but I have faith…. Just a thought
Phenomenal run Raz! Love your dedication,surely this must be a personal best?
For the car that exploded the front right at 4:52, was that the second pass on the same tires? In other words, are shaved foams only good for one high speed pass? (>180 mph)
great video! also nice builds and those passes were insane.... even on audio alone lol
Great build as always. Sucks about the lipo shortages. Quick question tho, do you think your burn outs just before the pass might be chewing up your foams? I know you’re probably trying to heat up the packs and tires, but that’s a dangerous move IMO. Love your content and wish you the best. 🤘🏻
I wonder if those sets will work in the shit servos to.. Iv got two of dmond servos with the snout snapped clean off -_-
This is my favorite thing about Raz. Brother you got that dedication and keep going after it!
Come back from the ashes to that awesome pass bro! Wow💯👍🏻👊🏻👊🏻👊🏻
kev was out today, raz! don't think you have to worry just yet :-)
Everyone here knows Kev😂
Hi Raz will be awesome if you put cameras on the runway. Hopefully soon you will hit that world record 👏🏾
not sure if this has been addressed b4 but what does a build like this cost? purely curious!
What receiver do you use on your twin motor builds
Thanks for showing your skillful creativity and awesomely fast creations-and for the excellent links in the description :-)
How do you keep your eyes on the car in the distance and that speed?
Great run Raz! Build looks amazing!
Raz why dont You use Cap Packs? Or !? I just not seing them in the car?
I just paused the video halfway through to go on Amazon to order 2 perfect pass servos! We shall see how they do in 1/8 Electric Off-road racing here in America
Instead of driving it to starting point, try carrying it by yourself to starting point to save every tiny bit of battery
No idea that it will help or not but it doesn’t cost anything to try it😄
Great video! New to the channel. Just a suggestion. Have you considered buying a "street sweeper"??? They make portable ones that you can push for a few hundred bucks. They might make ones that can attach to a truck (like a plow attachment). It would definitely be worth an investment!
Excited for you, 198mph for the first run that is awesomely brilliant, great job, 👍👍👍👍👌👌👌👌
Awesome stuff- - I'm curious, is it the camera that makes it look like you have quite a bit of tow out up front or is that on purpose?
Beautiful pass. The record is in sight!
Love your vids and your passion for the hobby!
198 is not amazing! You driving that thing at 198 is amazing ! Coming and going 198 lol your nuts