I'm sure I'm not the only one that is going to say this, but I'd love to see this thing with the new Hobbywing Max4 system in it. I think that would take care of any heat issues you might have.
BOOM!!! LOL The joys of editing. Sometimes a detailed build video is what I'm looking for. Other times? The BOOM level of detail is plenty and let's get on to the drive. Keep them coming Raz!
17:20 He mentions it in passing, where the audio is a tad muted in that clip. P.S. To other commentors: time stamp technology is very helpful when citing a passage in a video. Use it.
This is brilliant Raz. I was dearly hoping you'd rebuild the 5T. Beautiful engineering. Hyped to see how this goes up against the petrol ICE models at a track, cant wait. Thanks for sharing.
Youve got a great setup of both the car and the workplace for the cars. Everything looks like it comes together flawlessly! Great job! I am also slightly jealous at the amount of batteries you have :)
That thing is REALLY beautiful man! My heart broke too when I saw the first one.. RIP :( 12:45 Sometimes when I get into a "mess" like that w/ a custom build, I just cut a sheet of carbon fiber board to fit and stick it on a couple of M3 x 5 to 10mm standoffs, and mount my batteries and such on that. Just finishing up converting an old "blue chassis" RC10GT to brushless for my 8yo son. We put all the stock electronics that came out of my DR10 in it with 2s... Hope it's not too much for him! lol
Way over the hill here and on a sorta fixed income. Still working but Im thinking running up and down the apron or in a hangar is going to be on the wane. So I am not a free loader (I hope) but I do LEARN STUFF from your videos. Really enjoyed the breakdown on the gear ratios. Actually saved the video to take notes. Slowly getting a Limitless rigged out. 6s first then will move up. But your teaching still pretains to these rookie setups. So much appreciated and really digging it. You do sweet sheet metal work. Nice countersink action. People takin power tools to model cars, I've come to the right place.
I have been counting down the days tell your carbon fiber chassis will be available. I cant wait! If its as nice in person as what it looks like in your videos then ill be buying several for all my cars! I have everything you sell on 2 of my limitless except the shafts. Wanting to try them out next but im dying to get that chassis. It looks so awesome! Keep up the good work Raz! You are one of the main reasons im this deep into the speed run hobby!!
Your so clean, you remind me of my mom, always makin sure everything is clean.. But you know what ? I'M the same way, lol 😆 OCD IS AWESOME ! KEEP ON BASHING, OR RACEING! FROM LONDON ONTARIO CANADA 🇨🇦 PS, I have the same setup in my XMAXX, 800kv and XLX2 ESC plus all the goodies and the smile on my face is PRICELESS!!
1:17 brother I was 14 when I got my first NEW losi dirt car so I could throw a late model body on it and race with my brother and all his friends. So I set the car on the ground with no body made 2 stupid fast and smooth dirt car drifting laps and found the entrance to the pits we had built on out track and ripped the complete right side suspension off! Not gonna lie I cried because I just knew I had them all beat that night and didn’t get to prove it. All that being said I know your pain brother! 🤜🤛👍🙋🏻♂️🤷🏻♂️🤦♂️🌿
Yo raz we take time out to watch your channel because it take us away from our lives buddy we want more vids because you do a fantastic job bro keep doing what you do and I'm pretty sure you mum already proud. Plus you should have kept the same set up before the crash it would have been a complete monster.... plus when you coming to the UK you have some fans here what want to meet you 👊
Thought it was a Kraken at a quick glance at the thumbnail. Now I know. & stayed for the show. T-Boned Er into dah curb. Watta Rebuild, Stunning. Thanks for the vid.
Hey Raz Shifrin! That was a Awesome crash testing that twin motor 5T Crazy torque trying to drive that! I'm glad you brought it back with the single motor build and going to race it and have somemore Fun with it running it! Thanks for explaining the gearing and the parts for the build to see what works and able to set things up for the versability of running these trucks. It sounds so mean with that gearing you started with testing in the parking lot I can't wait to see the Racing content! Good Luck! 😉👍📹✔️💯👋👋👋
Awesome build & great to see it running again. How do you like the Hobbywing ESC? You typically use Castle so I’d like to hear your opinion. Does it have enough punch & power for you? I’m considering that ESC for a 1/5 Redcat Rampage XB-E.
I.... want....one...!!!!!!😲 That thing looks fun. My only fear is accidentally hitting something or someone including myself with that monster at full speed. Anyway.. amazing build.👏👏👍✌️
And "BOOM!!", cool content and was watching the time the Losi hit kerb appeal, awesome to see it rebuilt and testing, loving the content and let Mama know I smashed the bell💯
Everything You Need Is Here..
www.perfectpassrc.com/
Laughing my head off at the "kev install method"
Same XD
I’ve tried it as well. Doesn’t work!
@@mjrprojects9476 That's because you forgot to say Boom! 😂
@@monsterattack712 oh yeah! Now it works.
I'm sure I'm not the only one that is going to say this, but I'd love to see this thing with the new Hobbywing Max4 system in it. I think that would take care of any heat issues you might have.
I would also love to see that
Oh yeah I would too with the 70125 motor. Probably rip gears to shreds but would be cool to see anyway.
First channel I have ever watched who recognizes the viewers the way you do, love your content. I have learned so much.
Thank you.
That crash broke my heart too. Damn, Losi, she's always breaking hearts, lol. The build is epic!
I always tell people, concrete curbs are undefeated, so take the time to locate appropriate run spaces, the beginning of this video made my jaw drop.
BOOM!!! LOL The joys of editing. Sometimes a detailed build video is what I'm looking for. Other times? The BOOM level of detail is plenty and let's get on to the drive. Keep them coming Raz!
I work 100 hrs/week...I live for these videos...
❤️ this video. Hello 👋 Raz’s Mom.
I would much rather see this on a track and not in a parking lot. Great RC channel!
If you watched till the end you would hear him say his next video of it will be at the track 👍
@@3000gtalex exactly what he said and the end of the video, it for the track it will awesome
17:20 He mentions it in passing, where the audio is a tad muted in that clip.
P.S. To other commentors: time stamp technology is very helpful when citing a passage in a video. Use it.
Still the most epic total destruction crash I have ever seen sir!
You are too modest! You invest time and knowledge and we learn in minutes - thank you!
This is brilliant Raz. I was dearly hoping you'd rebuild the 5T. Beautiful engineering. Hyped to see how this goes up against the petrol ICE models at a track, cant wait. Thanks for sharing.
Raz, I’m shocked that curb is still alive!!! Sledge hammer or some gas and light it up!!! Love your builds!!! Happy RC’ing Y’all 🇺🇸❤️🏁🤘🏽
Youve got a great setup of both the car and the workplace for the cars. Everything looks like it comes together flawlessly! Great job! I am also slightly jealous at the amount of batteries you have :)
Can’t wait to see it run in the dirt
1:54 now you build a floating case for your place you build these cars and set this in it just like this shot! It’s a trophy now!! 🤜🤛👍🙋🏻♂️🤷🏻♂️🤦♂️🌿
Wow. That crash!!! So much beautiful work gone in 1 second !!!
Love being part of the Raz family rc crew. Your content is always great with plenty of interesting builds.👍🙏😜
That thing is REALLY beautiful man! My heart broke too when I saw the first one.. RIP :(
12:45 Sometimes when I get into a "mess" like that w/ a custom build, I just cut a sheet of carbon fiber board to fit and stick it on a couple of M3 x 5 to 10mm standoffs, and mount my batteries and such on that. Just finishing up converting an old "blue chassis" RC10GT to brushless for my 8yo son. We put all the stock electronics that came out of my DR10 in it with 2s... Hope it's not too much for him! lol
Way over the hill here and on a sorta fixed income. Still working but Im thinking running up and down the apron or in a hangar is going to be on the wane.
So I am not a free loader (I hope) but I do LEARN STUFF from your videos. Really enjoyed the breakdown on the gear ratios. Actually saved the video to take notes. Slowly getting a Limitless rigged out. 6s first then will move up. But your teaching still pretains to these rookie setups. So much appreciated and really digging it.
You do sweet sheet metal work. Nice countersink action. People takin power tools to model cars, I've come to the right place.
Finally, someone has gotten ride of that front extreme angle shaft on the Five T. Now if only it can be brought back to the gasoline engine.
Raz! Thank you bud! Always looking forward to your vids!!!
Thank you for showing us your knowledge in building electric rc cars, I enjoy it emensly. All the best on your effort to beat the worls speed record.
This is one of the most hardcore hits on RUclips
What a beast. I would love to be able to build a 5T like this. Cant wait to see some racing 👍
I have been counting down the days tell your carbon fiber chassis will be available. I cant wait! If its as nice in person as what it looks like in your videos then ill be buying several for all my cars! I have everything you sell on 2 of my limitless except the shafts. Wanting to try them out next but im dying to get that chassis. It looks so awesome! Keep up the good work Raz! You are one of the main reasons im this deep into the speed run hobby!!
Your so clean, you remind me of my mom, always makin sure everything is clean.. But you know what ? I'M the same way, lol 😆 OCD IS AWESOME !
KEEP ON BASHING, OR RACEING! FROM LONDON ONTARIO CANADA 🇨🇦
PS, I have the same setup in my XMAXX,
800kv and XLX2 ESC plus all the goodies and the smile on my face is PRICELESS!!
Your builds are a work of art. Nice job Raz
Love how clean your work shop is, your builds also are very neat and clean...well done..the 5T is awesome...total shame on the first truck...
Broke my heart seeing that crash again, great to see it up and running again
Happy to see it was rebuilt! That thing looks fun as hell.
18:56 And you know you are absolutely right. Feeling with you.😂😂😂 Honor your Mom, Raz. She deserves it. 😊
Raz I have to congratulate you my friend. Your videos are some of the best on RUclips for RC content. Keep up the great work brotha.
Your videos have been so inspiring and fun to watch, the good and bad times, keep it up brother!
Thank you so much!!
Good to see you have done Onyx packs, Get soldering and enjoy the gains
Once again you knock it out of the park. Can’t wait to see more with this truck bashing. 👍👍
So glad you brought it back to life, epic build can't wait to see you race it 😀
1:17 brother I was 14 when I got my first NEW losi dirt car so I could throw a late model body on it and race with my brother and all his friends. So I set the car on the ground with no body made 2 stupid fast and smooth dirt car drifting laps and found the entrance to the pits we had built on out track and ripped the complete right side suspension off! Not gonna lie I cried because I just knew I had them all beat that night and didn’t get to prove it. All that being said I know your pain brother! 🤜🤛👍🙋🏻♂️🤷🏻♂️🤦♂️🌿
In Mexico in vacation, still find time to watch your videos❤️
Boom!! That Kevin Talbot bit was hilarious :D
I loved it on this 1/5 scale losi 5ive -t, ya,ya, baby....
That's sick! Now I want one! But I think I'll stick 1/10th because of where I live
Hell yea🥳🥳🥳 glad to see her back on the road!!!
👀Can't wait for that TRACK VIDEO 🤜🤛💪🤘
DAMN....Didn't see that coming. That was hell of impact.
you are almost there perfecting your youtube formula
Dame even I felt the pain when that hit that curb Boom 💥 as kev would say glad it ant mine 😂😂😂
New set up looks awesome And looks hell fun 🔥🔥🔥🔥
The double sided tape method of laying out drill holes is great. Nice tip man, thanks!
Great advice thank you
This is truly awesome 🔥 🔥 Build is sweeeeeeeet, always wanted to build a sick fast RC ! Keep up the great content!
Everyone's mom talks like that!! Thank you for helping me relax and stay motivated after a long day on the grind !!
Yo raz we take time out to watch your channel because it take us away from our lives buddy we want more vids because you do a fantastic job bro keep doing what you do and I'm pretty sure you mum already proud. Plus you should have kept the same set up before the crash it would have been a complete monster.... plus when you coming to the UK you have some fans here what want to meet you 👊
Incredible build. Love the videos. Good luck at the track.
Thought it was a Kraken at a quick glance at the thumbnail. Now I know. & stayed for the show. T-Boned Er into dah curb. Watta Rebuild, Stunning. Thanks for the vid.
The front and rear chassis skid plate you have, is that aluminum or the stainless steel?
Hey Raz Shifrin! That was a Awesome crash testing that twin motor 5T Crazy torque trying to drive that! I'm glad you brought it back with the single motor build and going to race it and have somemore Fun with it running it! Thanks for explaining the gearing and the parts for the build to see what works and able to set things up for the versability of running these trucks. It sounds so mean with that gearing you started with testing in the parking lot I can't wait to see the Racing content! Good Luck! 😉👍📹✔️💯👋👋👋
So glad to see it back on the road you can’t keep a good man down, keep up the good work Raz, excellent 👌 😎
Loving the Kev connection! Awesome content from the pair of you 👏
Awesome conversion, cant wait for the race, just got my Perfect Pass servo, very nice.
Love the Kev install method. A great build
I thought for sure you were going to go with a hobbywing Max 4 esc in this build.
Super Thank YOU!
What all was involved with getting those wheels/tires to fit?
Nice ‘crashmanship’ 😀
Sorry had to have it off my chest…
Nice build mister! Love your videos!
Blessings from the Netherlands!
Love how some times you can see how some builds come together and makes you want to break the bank
Drifting with proline badlands is so satisfying. I love the squeals. :)
Awesome build & great to see it running again. How do you like the Hobbywing ESC? You typically use Castle so I’d like to hear your opinion. Does it have enough punch & power for you? I’m considering that ESC for a 1/5 Redcat Rampage XB-E.
That crash at first, though. What a kick in the shin...
Awesome build , keep us updated on the Onyx lipos . Thanks for sharing your advice. 👍
Happy to see this back in action I remember watching the crash video a few months ago that was a bummer. The new chassis is very nice looking though.
Very nice. If the motor mount fails, consider reaching out to Vitavon, they make the best losi 5ive motor mount. This rig looks great.
i like that you explained the mathematics great!!
Really professional build. A work of art. Excellent content mate from the Uk 🇬🇧
Gotta keep momma happy! Haha
I been with this awesome channel from beginning. Cant get enough lol. The video editing and awesome builds etc.. 2nd to none!
Thanks mike!;)
I.... want....one...!!!!!!😲 That thing looks fun. My only fear is accidentally hitting something or someone including myself with that monster at full speed. Anyway.. amazing build.👏👏👍✌️
You should build RC cars for the world 🌎 man like Lamborghini makes cars frfr you have an awesome talent with RC cars
Hey Raz! I was wonder what i motor and esc i should use on a arrma limitless for speed runs . and also what do you use to record the speed?
Looks incredible
And "BOOM!!", cool content and was watching the time the Losi hit kerb appeal, awesome to see it rebuilt and testing, loving the content and let Mama know I smashed the bell💯
Does that Scorched mount only work with the Taylor RC chassis?
Love the Videos after seeing this build it kinda makes me wanna get into the 1/5th scale again
What oil weight did you go with in the diffs? Looks like your gearing calc was bang on 👍
Really enjoyed this video! Planning to build a brushless 5ive T 2.0 in the next few weeks thanks for the video Raz
Please put the new max 5 g2 650kv in this. Love all your builds. Work of art really.
This is a different beast. I liked the idea of direct drive.... simple.
Wow that was a hard hit. I've never seen anything like that before.
You are such a fun an informative person to watch. Really appreciate all the time an effort you put in to doing all videos
That machine is awesome!
We join you because we love you Raz 🥳
this car is sick!
Raz, awesome build and awesome tips. Great content as always 💯👍🏻👍🏻👍🏻
@Raz Shifrin I was wondering what turbo fan you use? There are so many on the market.
I’m surprised you didn’t go with the new max 4 set up
@ 9:30 the bench role test was incredibly smooth. I have a Mojave but it doesn’t have the same rolling resistance as yours, should it?
it's awesome to see how much your channel has grown! when i first ran across you I think you only had 40K
Anyone good with Talbot is good with me. He is the reason I'm currently watching you.
didnt say the boom!! ;) what nice chuckle!! awesome build
How do you configure for weight? Or did you say lm kinda slow. There was a bug on my window🙊
So funny this episode - loved to watch it. 👍 Beside that cool built!!! Greats from Germany!