Jaw-Dropping Dirt Bike Restoration - 2 stroke YZ125
HTML-код
- Опубликовано: 28 сен 2024
- Guys I am so stoked to show you this dream 2 stroke dirt bike build time lapse 2001 Yamaha YZ125 that we have been working on for quite some time. Check out the video and let me know your thoughts! Cheers
Complete build playlist: • New 2 stroke dirt bike...
Whiskey Throttle Media review: • BACK TO THE PAST | 200...
Build parts list:
Wiseco Performance Products
www.wiseco.com
56mm Top end kit
Clutch basket with Gear
CV4 High Temp Radiator Cap
Rekluse
www.rekluse.com
Torque Drive Clutch plates
Pro X Racing Parts
www.pro-x.com
Connecting Rod Rebuild kit
Main bearings & Crank seals
Cranks seals
Carb rebuild kit
Throttle cable
Clutch cable
Front sprocket
Rear sprocket alloy
MX Chain gold
Upper & lower chain roller
Steering bearing kit
Swing arm bearing kit
Swing arm linkage bearing kit
Front wheel bearing kit
Rear wheel bearing kit
TMR
www.tommorganr...
Cylinder porting & set up for 134cc
Head Mod
Millennium Tech
www.mt-llc.com
Strip, re-pair damage and re-plate to 56mm TMR spec
Cometic Gasket
www.cometic.com
Engine gaskets
Cranks by Andrew Langston
@mxandrew1118
Crankshaft rebuild with ProX rod kit
Parapros
Engine Rebuild
FMF Racing
www.fmfracing.com
Fatty exhaust
Shorty Silencer
Dunlop Tire
www.dunlopmoto...
MX33 front
MX33 Rear
Klotz Synthetic Lubricants
www.klotzlube.com
R-50 Two-Stroke Pre-Mix & Chemicals
Clarke Manufacturing
www.clarkemfg.com
OEM style/sized Fuel Tank
ICW
www.icwbikesta...
Radiator straightening and bracing
Uni Filter
www.unifilter.com
Two-stage Air Filter
DeCal Works
www.decalmx.com
Semi-Custom Graphics kit
Preprinted number plates backgrounds
Frame tape
MX Plastics
www.mxplastics...
Full plastic kit
Mud Flap
Moto Seat
www.motoseat.com
Custom Seat Cover
Works Connection
www.worksconne...
Hour Meter & Mount
Stand
Front Brake Rotating bar mount
Elite Clutch Perch Assy
Front Brake Cap
Steering stem nut
MotoTassinari
www.mototassin...
V-Force Reed Cage
ODI
odigrips.com
MX V2 Lock On Grips
7/8 Bars
Race Tech
www.racetech.com
Suspension Re-Valve and set up
Hard Anodize
Galfer USA
www.galferusa.com
Brake line rear
Brake line front
Front oversized Rotor
Rear Rotor
Front & Rear Brake Pads
Specbolt Fasteners
www.specbolt.com
Engine and Plastic complete bolt kit
Rear sprocket bolt kit
Scar
www.scar-racin...
Titanium Footpegs
San Diego Powder Coating
www.sandiegopo...
Sandblasting, powder with super-durable clear, and “race prep masking’
Tusk Off road
www.tuskoffroa...
Front Rim
Rear Rim
Front Spoke kit
Rear Spoke kit
VP Fuel
www.vpracingfu...
C12 Fuel
MXRevival
www.mxrevival.com
Zinc plating stock hardware
Fasst Co
www.fasstco.com
Rear Brake Return Spring
Rear Brake Clevis
Sano Metal Finishing
www.sanometalf...
Vapor Honing & Cerakoting
Tech 167 3D Printing
@tech167_3d
Swing Arm Plugs 3D printed
Dirt N' Iron merch: www.dirtniron....
www.dirtniron....
/ dirtniron
/ dirtniron
Brought to you by:
Dirt Bike TV
/ dirtbiketv
/ dirtbiketv1
PureMoto
puremoto.com/
/ puremoto
Decal Works
www.decalmx.com/
/ decalworks
MX Plastics
www.mxplastics...
/ mxplastics
The look on your face when you first fired it up says it all, I think the bikes from that era, late 90's-early 2000's, are some of the best looking and the color schemes you used are perfect, the fact that you can still get new plastics for older bikes makes all the difference, it certainly has for my builds, outstanding work Rado.
thanks a lot Rob, appreciate it!
Watching this mesmerized. I cried when you fired it up My God it’s beautiful
thanks a lot Peter, glad you like it! :)
AWESOME WORK MAGNIFICENT BIKE!
Love the old school look. with modern graphics and controls.
. I raced back in the 70"s.
thanks for sharing, glad you like it!
I'm 69 and that bike looks totally awesome and it's 20 years old if I had that back in my day I'd definitely be king of the MX even with a 125 nice ride
The parts look brand new after the hydro blaster. Amazing
Super proud of you and this build Rado 💪
It truly is a beauty that will be around for generations to enjoy!
thanks a lot brother, appreciate it!
Love how you keep it looking like yz red and white like old school
thanks, glad you like it!
Love it what workmanship awesome job love the channel
Thanks Danny, appreciate it 👍
Bro, that turned out amazing. Great job on the build.
Thanks a lot👍
Excellent Color concept! Very impressive.
Thank you, glad you like it 👍
That 134cc motor seems to really dialed,what a weapon.great job.
brads the man only person i trust with my motors
Yes!
You did a great job!
I’m doing a 1999 YZ 125 rebuild as we speak. Complete motor over hall and all bearings and mounts…
Thanks again and Great job!
God bless!
Wow!..Great build…great video!
Thanks 👍
That looks awesome with the chrome pipe I mean😊
The bike turned out beautifully. It sounds dialed in.
Thanks
I like the way frames are made today
Glad your doing the wheels the front has a pretty good flat spot or dent. Bike looks great good job!!
Love watching these before going to bed😅
Nice job great lookin bike
clear and clean....amazing restoration .
Beautifull video mate. Congrats from Mauritius Island🤘
Rado, this bike is amazing. Greeting to Slovakia.
ABSOLUTELY A BEAUTIFUL BIKE!!!!!!!
Thanks!
Always a pleasure to watch your videos, you did a fantastic job on your 125 yamy .the whole package came out 10 out of 10, well done on the designing , planning and work that you did. Came out awesome! Your an honest, true guy that's what I like the most from your vids take care regards Johnny australia... 👍👍👍
Johnny, thanks a lot for watching and giving a great feedback. It is so encouraging to read your comment mate! Greetings to Australia
@@dirtniron thanks 4 taking the time to replying back to me I wasn't expecting that, I know a busy man u are. I appreciate your comment thanks again mate!! Enjoy your day mate.. Johnny australia...
Im always watch your video sir from Philippines god bless you always
Awesome! Thank you!
Sweet build Bro
Hey man well done it looks and sounds great 👍 awesome job love the colors
Glad you like it, thanks man!
Awsome bike currently building my own
3:55 puckered up on that one
Amazing work guys!! So cool!!
BEAUTIFUL!
Had to subscribe. What a beauty!
Picked up a 2001 Yamaha YZ125 for $750. It needs a new gas tank. It does run. It needs some TLC......not sure yet if I'm going to do a frame up resto at this point or not. It's gonna look good sitting next to my 2023 Yamaha YZ250. Looking forward to riding the 125 soon.
have fun with your project, great bikes!
@@dirtniron
Forgot to mention, your bike is beautiful. I'm going with Old School yellow and black. That's what color YZ's were when I was a kid in the 70's and 80's. Sourced a new yellow tank and yellow plastics.
It's a masterpiece
Beautiful work!
thanks a lot!
Please share your play list, wonderful video, thanks for sharing.
Mantaaap om👍👍👍👍
Bike looks absolutely incredible but I can’t help but notice this was a missed opportunity to bring back the gold rims they had in that era
thanks man, yes I considered gold rims..
The "Look at this banana" part made me crack ;D
Keren sekali motornya
Ok what is the 10,000 price tag is this how much you spent to restore it or is this what it sold for 😮 very nice bike a work of art 🎉
Great Video and a clean job. What Hydo blaster do you use? It is a shop unit or do you farm it out? What force of cleaning is it and what parts do you usually hydro blast? I've done about 5 full restorations and I appreciate your attention to detail. You're a man of the same cloth as me. I should post up my restorations to a 2005 YZ250 which I converted to an Eric Gorr 300 kit. I miss that bike. And a conversion of a YZ144 big bore to a 2008 YZ450F frame where I fabricated a new Air boot and fabricated it out of carbon fiber using a clay mold.
thanks brother, glad you like it. I go to Sano Metal Finishing, my buddy Chris owns that shop and has pro level blaster. I blast all the aluminum parts, entire engine and sometimes rubber stuff too like airbox, stock hoses and clamps and other small pieces. I would love to see your projects. any links?
Are the screws specmotos, nickelwurkz .They are awesome 😊
Inspiring bro
Very nice I like it
I like it goodjob 💙💙
I just did a similar build . Definitely not to this level, (ballin on a budget) but similar style and colors. I did it with a 99 yz125 though.
where can we see it?
Perfect Very Nice✌
I ride a yz125x and I love this bike. Perfect amount of power, and not too much. I can ring it out!
Also I used your video to setup my carb. I have the 2023 model
How do you apply the radiator guard decals?
Nice, but could have nicer using silver colored alloy rims and plain red seat cover and lesser stickers.
Gas Gas is fake red , is that fake red or Yamaha red.
Slovenskooooooo🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰!!!!!!
Awesome ❤
What use the tier?
Mantul
What happened to the wr450?
working on it, prepping and gathering parts. Update coming soon. Check my IG for more WR stuff, I share there a lot
Awesome bike dude!!
🔝🔝🔝😍
❤😊
👏🏼👏🏼👏🏼👏🏼👏🏼🇧🇷.
Frount rim is bent
how the hell did he find this for $700 in CA?????????
Frame looks cool but it’s made of the wrong material I think by now the mx world will realise that it is more expensive to create a aluminium frame so the steel frame bikes are making a fortune but champions will not come again as Yamaha Honda Suzuki and kawi have been r and d for years now and I believe they have made it a far superior part than steel tubing come on its 1990s technology. Let’s put it this way in America there is about 5 or six riders that can go pretty much were they want. Henceforth cooper Webb Eli tomac. Jett Laurence danger boy. I’m just saying that in the industry the top boys will be riding factory bikes with aluminium frames the rest that are lucky enough to get a factory ride will be on a steel frame bike in 12 th position. What chase sexton just did is a big big mistake for him. If I was chase I would approach kawi and say look your number 9 is done I am either the best or second best in the world and steel number 9 s ride.
What is the song playing at the 16 minute mark? I really like it and would love to find the download
I miss my 02 yz 125😢
Awesome build, I’m curious how much $ this ended up costing with all that cleaning and coating.
glad you like it, all the part retail and some custom work would get you around $8-10k
I have dtj.125 until now his alive 40 years old now
thats cool!
Beautiful bike! Worth all the trouble. Thank You
thanks, glad you like it!
Amazing build.
Congrats, Rado.
Really amazing brother . I know how much hard work you doing . Keep it up
Watching from india
Thanks a ton
Man that bike looks absolutely amazing💯💯💯 very well done on color schemes and graphics just really tops it all off! Seriously might be my favorite look ive seen on here so far and I've watched countless restorations. Very clean looking 👌
Glad you like it! thanks a lot Matt!
Wow.
Can i ask where do you find the throttle group? I have the same bike and i'm rebuilding it too but i can find this thing 🙌🏼😩
Very nice, just had one question, what is this roller used for in 46.15 ? Thanks
Awesome build! What track did you take it to? Looks like a blast
If you love the 125x, you will double love the 250x that also has power off the pipe. Anyway, EPIC Build!
Absolute masterpiece as always!
thanks a lot, appreciate it!
nice build, great work!👍 pozdravujeme zo Slovenska!🙂
Speechless.😶
لوناض نيلون مسمار لوناض مسمار نيلون دويات مسمار لنبة
What an amazing build, only in America! I do think you can get reconditioned radiators with clean straight fins though. And this black wheel fad is just annoying, looks better in old school silver. Does boring it out so much cause trouble in the future if you want to rebore once it's scored? Maybe one of these new carbs that don't need jetting. Just my opinion, but other than that good job.
seat design is not good. Plain red was nice
Damn, it feels good to see people up on it I flipped two keys and didn't flaunt it. Nice father N son time together.
Thanks bro!
Thats Yz (OG) white/red is so sick-looking, great job man! Looks Buttery!
Respect 🫡 🇺🇦🇺🇦🇺🇦
I never get tired of watching this bike come together, would have been a broke to build winner for sure. I would love to see some video of you racing in 2024. I am considering changing my yz125x to a retro looking bike like yours. How tough was it to get the white tank?. Everything else seems pretty easy to find. # still motovated!!
glad you like it Stuart! The tank is from Clarke, available on their website - no problem at all
Good job bro i like it
I am a fan from Thailand
How many teeth do you put in the rear sprocket?
pretty sure it was 50
Man that is one of the best looking bikes I've ever seen, well played indeed.
And such an amazing beautifull dirtbike........
Looks amazing……waiting for the WR450
Beautiful bike you should be very proud of that sweet!
Beautiful!
Thanks 👍
Great video 👍
Glad you enjoyed it
Ripper vid love your bike builds & explanation of details wow 👍👍
Glad you enjoyed i, thanks!
Why does it sound rough as hell when you started it ? Like the piston is knocking or the rod ?
Красота! Очень круто, приятель!