📌📌Drop a comment to win this week's Dunlop tire sticker giveaway! CONGRATS TO LAST WEEK'S COMMENT WINNERS - Mike, Albert & MotoRacerX22!! Don't forget to get entered to bring this epic 1997 YZ125 build home over at www.mxskillshack.com
Great videos fellas! I had no idea there was a tool for greasing the headset bearing. My favourite part of the video has to be the humour😂. It makes the videos what they are! Keep up the great work! I also learnt that there is a cir-clip in the cast hubs.
Congrats! Your comment was chosen as one of our winners! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS
You have my respect, you guys are men of your word, calling me out for the baby elephant reference haha Once again, amazing video! I appreciate you guys' willingness to re-use the stock hubs and showing how to resurrect an old set of wheels vs just tossing them and replacing them completely. In addition to the cost savings you mentioned, it also helped me learn how they work, and how to properly maintain them to get the most life out of them too (and my tires and tubes), stock or aftermarket
You know Jake, I’m not going to miss an opportunity for a baby elephant… It’s quite awesome you’re learning and seeing the value in what it is we’re doing. I’m not certain you have yet so I wanted to send a reminder. This VERY bike could end up in your garage. You just need to MAKE sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS
@@MXSkillShack come on, man! You had me worried my subscription didn't go through properly haha. All should be good; I was able to get signed up a while back!
Hey Jake. Congrats dude. We chose your comment as a winning candidate! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS
You dudes are killing it Bros. How much longer you think until this bike will be finished and given away? I'm a subscribed member, dude I'm crossing my fingers to hope to when those dunlops.
And we sure as hell appreciate you! No specific date yet. It’s been a bit of a struggle getting the shop up and running, and figuring out what the heck we are trying to do officially as a team (learning one another) But we are finding some serious momentum now. In the future we’ll have better clarity on questions like this, because things will become more streamlined for us and easier to present in a more professional manner (like mXrevival giveaways, with set start and end dates) In the meantime, we appreciate your patience and your support. It means the world to both of us. One thing is for certain, however. We will deliver! -Charles // MXSS
Hey guy's !! Absolutely love the wheel lacing demonstration - top notch work Uncle Tony 👍 what i like most about skill shack is Charles and Tony back up what they say with equal hands on work !!! Lots of knowledge on this channel, always looking forward to the next one 👍
Hey Mike! Thanks for hanging with us buddy. Well we’re glad you have found the value in it. Many ways to skin a cat as they say. These techniques are something I learned through my career as a professional race mechanic / bike builder and have been game changers for me and how I build bikes or even maintain them. Tony // MXSS
Congrats Mike! Your comment was chosen as a winning candidate! Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS
You guys are awesome to watch. Always learning something. My list is probably too long to mention here. I'm truly a two smoker die hard (which is one of the things I love about your channel), but would yall consider working your magic on a 2001 Cannondale MX400?
Thanks Josh! But really you’re the awesome one…. Glad to hear you’ve learned something. That’s the idea. I remember those cannondales and how they were a beast, but they seemed to always have mechanical issues at the nationals. I think Keith Johnson was one of the riders. Well we’ve got some ideas brewing about future bikes and utilizing one I’m quite fond of and know inside and out - ‘05-‘08 CRF450. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
Awesome video!!! You guys are the best!!! So much great and useful information. Reminded me of my time changing tires at Cycle Tune in Fresno CA way back when. Thanks!!!
Hey Joel! Thanks for the kind words. We appreciate you hanging with us. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
Well I could talk about everything I learned about building beautiful wheels in detail but I turkey learned how much I like Tony’s nonstop dirty jokes 😂😂
That’s Charles’s fault…. Glad you at least learned SOMETHING from myself. Focus already 😂. Also make sure you sign up at www.mxskillshack.com for your chance at winning the yz and everything else we’ll build. Whaaaattt! Now that’s dirty! Tony//MXSS
Uncle Tony , have you ever ran into any issues with the wheels getting out of true or offset after pressing the tires onto the wheels ? Reason I ask is bc of the force against the spokes while your pressing down. Maybe I’m just overthinking it …. Looking forward to the next video boys!!!!💪
VERY Much appreciated Derek! Thank you! If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS
Great episode as usual Charles and Uncle Tony. You're a natural in front of the camera, Charles......Uncle Tony has become the perfect partner. I've done a few tyres and rims but picked up a few good tips from Uncle Tony......work smarter, not harder applied here! How the f@#k you aren't getting more views when there are other sh1t shows with no idea is beyond me. Props to your sponsors again........ Fast Blast & Coat: Dubya USA: All Balls Racing: Bolt Motorcycle Hardware: Dunlop Motorcycle Tires: Hinson Clutch Components Racing: Works Connection: HYGGE Performance: Light Speed Carbon: Velocity Components: Stuck Nutz: Maxima Racing Oils:
If it’s not our great Aussie brus! You my friend rule. Appreciate the kind words and you spending some of your time with us. You always know what’s up. Glad to hear you learned something from it. 22 years of moto knowledge to spread so I’m sure there’s something for everyone. It makes me happy to hear it helps someone out. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
@@MXSkillShack I have been working on my own bikes for 48 years now...and counting. If I don't learn something new, I usually learn a better way of doing things from you Tony and also Charles. The added bonus is that you both make it FUN!
Thanks Beau! Check out the 3DP link below in video. Also if you haven’t be sure to sign up at MXSKILLSHACK to get into the running for this roach! Tony // MXSS
@@MXSkillShack thank you. I’ll head over and get some👍 what clutch arm will you be using? You guys mentioned there was a road bike clutch arm? Just wondering what that’s off. Thanks again
Hi Paul! Buddy you sure do. Be sure to check out more of the Velocity products. Great stuff. Also not sure if you were aware, but you can WIN this bike and others that we build as an member to MXSS. Tony // MXSS
Hey Don. Our website is www.mxskillshack.com - these giveaways are a little bit different than the mXrevival giveaways. Same over the top level of quality, however. Thanks for asking!
i love the videos keep up the good work i can wait to see this bike done and i have raced dirt bikes is the past and watching you guys come together and build this old school bike to make it look new is awsome.
Thank you for the kind words and feedback. We greatly appreciate your support. Ya know you should sign up at www.mxskillshack.com so it can end up in your garage and you could race some vintage races. Just a thought… Tony // MXSS
Just wanna say a big thanks to you too you’ve helped me out quite a lot watching these videos is so amazing how you can turn such a rundown bike to such an amazing bike. Keep up the work. 🔥💯
We appreciate those words! Also very glad to hear you’ve learned something. We do enjoy bringing these turds back to life. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information. Tony // MXSS
Congrats! Your comment was chosen as one of the winners. Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details. Tony // MXSS
Thank you Rick! Check this out too if you haven’t. Make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them. Tony // MXSS
Thank you! We appreciate you hanging with us. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and possibilities of winning one of our bikes! Tony // MXSS
First, i just want to thank you for the Stuck Nutz! Second, you guyz are slayin this build, this is gonna be so sick and you two together are killin it! I have four tires to change and this is right on time. I'm a hands on guy so I've learned a lot here. Thanks for being so thorough and breakin it down for us laymen that's not done it before, badass! My bikes are of the vintage variety which i think you know already fellas, your techniques applies to my shxt too and you guyz are always my goto...final personal note, wife and little boy will be back from overseas next week after two and a half months so im ready for some stuck nuts believe me! Lol....can't wait til next week to check in the motor build. Have a great week fellas...
No Albert, thank YOU!! We appreciate you greatly. We’re so happy to hear you are going to attempt this and use the techniques. That is awesome! You got this! Tony // MXSS
The entertainment from watching the two of you guys showing useful skills on building bikes and just the crap you guys give each other is absolutely the best! You guys make it fun and enjoyable. You guys have helped so much on my 98 KX250 restoration! The Dunlop stickers would look great on my KX build!
We appreciate that feedback! We enjoy doing this, but one of biggest takeaways is that folks are actually employing what they learned. That’s awesome! We’re just two dudes giving each other crap in a garage working on bikes. It’s rad!
![Cody Johnson - I'm Gonna Love You (with Carrie Underwood) [Official Music Video]](http://i.ytimg.com/vi/yy9PuYMU29g/mqdefault.jpg)
📌📌Drop a comment to win this week's Dunlop tire sticker giveaway! CONGRATS TO LAST WEEK'S COMMENT WINNERS - Mike, Albert & MotoRacerX22!! Don't forget to get entered to bring this epic 1997 YZ125 build home over at www.mxskillshack.com
Great videos fellas! I had no idea there was a tool for greasing the headset bearing. My favourite part of the video has to be the humour😂. It makes the videos what they are! Keep up the great work! I also learnt that there is a cir-clip in the cast hubs.
Thanks for watching, this one is a beast of a video. Awesome comment too!
Congrats! Your comment was chosen as one of our winners!
Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details.
Tony // MXSS
You have my respect, you guys are men of your word, calling me out for the baby elephant reference haha
Once again, amazing video! I appreciate you guys' willingness to re-use the stock hubs and showing how to resurrect an old set of wheels vs just tossing them and replacing them completely. In addition to the cost savings you mentioned, it also helped me learn how they work, and how to properly maintain them to get the most life out of them too (and my tires and tubes), stock or aftermarket
You know Jake, I’m not going to miss an opportunity for a baby elephant…
It’s quite awesome you’re learning and seeing the value in what it is we’re doing. I’m not certain you have yet so I wanted to send a reminder. This VERY bike could end up in your garage. You just need to MAKE sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them.
Tony // MXSS
@@MXSkillShack come on, man! You had me worried my subscription didn't go through properly haha. All should be good; I was able to get signed up a while back!
WE appreciate the hell out of you Jake! Thank you 🙏🏽!
Tony // MXSS
Hey Jake. Congrats dude. We chose your comment as a winning candidate!
Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details.
Tony // MXSS
You dudes are killing it Bros. How much longer you think until this bike will be finished and given away?
I'm a subscribed member, dude I'm crossing my fingers to hope to when those dunlops.
And we sure as hell appreciate you!
No specific date yet. It’s been a bit of a struggle getting the shop up and running, and figuring out what the heck we are trying to do officially as a team (learning one another)
But we are finding some serious momentum now.
In the future we’ll have better clarity on questions like this, because things will become more streamlined for us and easier to present in a more professional manner (like mXrevival giveaways, with set start and end dates)
In the meantime, we appreciate your patience and your support. It means the world to both of us.
One thing is for certain, however.
We will deliver!
-Charles // MXSS
Right on amigos those red wheels look sick. Can’t wait to see the completed build keep rocking 🤘🏼🤘🏼💪🏻💪🏻
Massive, thank you, Mr. Price!
Hey guy's !! Absolutely love the wheel lacing demonstration - top notch work Uncle Tony 👍 what i like most about skill shack is Charles and Tony back up what they say with equal hands on work !!! Lots of knowledge on this channel, always looking forward to the next one 👍
Hey Mike! Thanks for hanging with us buddy. Well we’re glad you have found the value in it. Many ways to skin a cat as they say. These techniques are something I learned through my career as a professional race mechanic / bike builder and have been game changers for me and how I build bikes or even maintain them.
Tony // MXSS
Congrats Mike! Your comment was chosen as a winning candidate!
Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details.
Tony // MXSS
You guys are awesome to watch. Always learning something. My list is probably too long to mention here. I'm truly a two smoker die hard (which is one of the things I love about your channel), but would yall consider working your magic on a 2001 Cannondale MX400?
Thanks Josh! But really you’re the awesome one…. Glad to hear you’ve learned something. That’s the idea. I remember those cannondales and how they were a beast, but they seemed to always have mechanical issues at the nationals. I think Keith Johnson was one of the riders.
Well we’ve got some ideas brewing about future bikes and utilizing one I’m quite fond of and know inside and out - ‘05-‘08 CRF450.
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
Awesome video!!! You guys are the best!!! So much great and useful information. Reminded me of my time changing tires at Cycle Tune in Fresno CA way back when. Thanks!!!
Hey Joel! Thanks for the kind words. We appreciate you hanging with us.
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
Well I could talk about everything I learned about building beautiful wheels in detail but I turkey learned how much I like Tony’s nonstop dirty jokes 😂😂
That’s Charles’s fault…. Glad you at least learned SOMETHING from myself. Focus already 😂.
Also make sure you sign up at www.mxskillshack.com for your chance at winning the yz and everything else we’ll build. Whaaaattt! Now that’s dirty!
Tony//MXSS
Uncle Tony , have you ever ran into any issues with the wheels getting out of true or offset after pressing the tires onto the wheels ? Reason I ask is bc of the force against the spokes while your pressing down. Maybe I’m just overthinking it …. Looking forward to the next video boys!!!!💪
Mike Honcho!! No sure I have not. It’s pretty stout once all is set and spoke tension is proper. Great question amigo!
Tony // MXSS
Kudos to you for wearing the hearing protection. This from a 53-year old guy who didn't (and should have).
It’s a must! Sometimes we forget, but it is wicked important.
Tony//MXSS
Beautiful build guys absolutely stunning work, best to you guys from Texas
VERY Much appreciated Derek! Thank you!
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them.
Tony // MXSS
Badasss learned alot. Awsome vid guys thanks
Super stoked to hear that! That’s why we’re here. Thank you for being part of what we’re doing. 🫵🙏
Now I know it's so much cheaper to buy a rim and use the original hub instead of getting a whole set
It certainly can be! Almost half in some cases 👀
Great episode as usual Charles and Uncle Tony.
You're a natural in front of the camera, Charles......Uncle Tony has become the perfect partner.
I've done a few tyres and rims but picked up a few good tips from Uncle Tony......work smarter, not harder applied here!
How the f@#k you aren't getting more views when there are other sh1t shows with no idea is beyond me.
Props to your sponsors again........
Fast Blast & Coat:
Dubya USA:
All Balls Racing:
Bolt Motorcycle Hardware:
Dunlop Motorcycle Tires:
Hinson Clutch Components Racing:
Works Connection:
HYGGE Performance:
Light Speed Carbon:
Velocity Components:
Stuck Nutz:
Maxima Racing Oils:
If it’s not our great Aussie brus! You my friend rule. Appreciate the kind words and you spending some of your time with us. You always know what’s up. Glad to hear you learned something from it. 22 years of moto knowledge to spread so I’m sure there’s something for everyone. It makes me happy to hear it helps someone out.
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
@@MXSkillShack I have been working on my own bikes for 48 years now...and counting.
If I don't learn something new, I usually learn a better way of doing things from you Tony and also Charles.
The added bonus is that you both make it FUN!
Great build guys. I’m building a 01 yz125. Any link to the rear brake line brackets?
Thanks👍
Thanks Beau! Check out the 3DP link below in video. Also if you haven’t be sure to sign up at MXSKILLSHACK to get into the running for this roach!
Tony // MXSS
@@MXSkillShack thank you. I’ll head over and get some👍 what clutch arm will you be using? You guys mentioned there was a road bike clutch arm? Just wondering what that’s off. Thanks again
thats an amazing tool i need that in my life. glad i found you guys
Hi Paul! Buddy you sure do. Be sure to check out more of the Velocity products. Great stuff.
Also not sure if you were aware, but you can WIN this bike and others that we build as an member to MXSS.
Tony // MXSS
How much is the entry for this cr and where can I apply
Hey Don. Our website is www.mxskillshack.com - these giveaways are a little bit different than the mXrevival giveaways.
Same over the top level of quality, however.
Thanks for asking!
In order for Uncle Tony to be a proper Vanna Brown, you need to put him in an evening gown!!!
He was wearing the proper underwear at least
Todd…. So let’s just say I had another batch of bad tacos. The beans get me every time. HELLAFIBER
Seals in laces out hahahahaha Finckel is I-horn, I-horn is Finckel! Finckel a MAN!!!!
Nice work boys very sweet wheel build hope all is well.
Hahahaha, but what about snowflake!
Have you signed up yet Tyler?! Get with it if you haven’t - AH BOB SAGET!
Tony // MXSS
@@MXSkillShack I just signed up for it Tony tell Chuck as well I’m sorry it too so long lol❤️😎
So awesome Tyler!! We appreciate that greatly.
i love the videos keep up the good work i can wait to see this bike done and i have raced dirt bikes is the past and watching you guys come together and build this old school bike to make it look new is awsome.
Thank you for the kind words and feedback. We greatly appreciate your support.
Ya know you should sign up at www.mxskillshack.com so it can end up in your garage and you could race some vintage races. Just a thought…
Tony // MXSS
Stoked to have you! Hope you win too! -Charles // MXSS
Just wanna say a big thanks to you too you’ve helped me out quite a lot watching these videos is so amazing how you can turn such a rundown bike to such an amazing bike. Keep up the work. 🔥💯
We appreciate those words! Also very glad to hear you’ve learned something. We do enjoy bringing these turds back to life. If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information.
Tony // MXSS
Congrats! Your comment was chosen as one of the winners.
Make sure you go to www.mxskillshack.com and contact us through the “reach out” link at the bottom of the main page so we can get your details.
Tony // MXSS
Just done it, boys thank you so much
you done good 😁 keep em coming!
Thank you Rick!
Check this out too if you haven’t.
Make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and the possibility of winning a bike once we complete them.
Tony // MXSS
Great video. Keep it up
Thank you! We appreciate you hanging with us.
If you haven’t make sure you sign up at www.mxskillshack.com and tell your friends! I’m sure they would also appreciate the information and possibilities of winning one of our bikes!
Tony // MXSS
First, i just want to thank you for the Stuck Nutz! Second, you guyz are slayin this build, this is gonna be so sick and you two together are killin it! I have four tires to change and this is right on time. I'm a hands on guy so I've learned a lot here. Thanks for being so thorough and breakin it down for us laymen that's not done it before, badass! My bikes are of the vintage variety which i think you know already fellas, your techniques applies to my shxt too and you guyz are always my goto...final personal note, wife and little boy will be back from overseas next week after two and a half months so im ready for some stuck nuts believe me! Lol....can't wait til next week to check in the motor build. Have a great week fellas...
No Albert, thank YOU!!
We appreciate you greatly.
We’re so happy to hear you are going to attempt this and use the techniques. That is awesome!
You got this!
Tony // MXSS
The entertainment from watching the two of you guys showing useful skills on building bikes and just the crap you guys give each other is absolutely the best! You guys make it fun and enjoyable. You guys have helped so much on my 98 KX250 restoration! The Dunlop stickers would look great on my KX build!
We appreciate that feedback! We enjoy doing this, but one of biggest takeaways is that folks are actually employing what they learned. That’s awesome! We’re just two dudes giving each other crap in a garage working on bikes. It’s rad!
Hell yeah, dude! -Charles // MXSS
Let’s go so glad to watch this while I’m working on the 5hundo
Thanks for joining us, bro!
You both have a Beautiful Sickness with Building Bikes🦾🔥🏁
The only prescription is MORE COWBELL!!!