Lol. Nope not dead. Just nothing new. Shipping challenges, price increases, and lack of inventory has been the hold up. Got some great stuff around the corner!!!
I'll take one at the $325 price tag LAHover said you were going to sell them at, Smolik-performance sells the Minarelli upgrade kit for $265, which looks like a little better kit than what the DHL/DLH guy sells, this will be a great deal if your able to pull it off, thanks for sharing.
californiamotorbikes sells full minarelli engines for $200. Got one, rebuilt it replaced bearings and some things, and so far with about 20 miles it ran ok. Did some port work as well, so now it makes probably about 2hp increase from the stock 6hp. Gotta adjust main clutch spring to grip better due to too much power, and/or upgrade clutch assembly
Had this motor like 2 years now. I had some issues back when I ordered the engine. And wasn't very hopefully. But I held out buying a minarelli engine. And I'm still happy with the engine. I've riden it a lot. And it's still going. I did some case matching. A little porting. Ummm really haven't changed much or did much and it's been a reliable engine. If your hesitant to buy. It's a good motor for a good price. Not a rip off or underhanded company. Thanx again. I'm looking into a ms460 ms660 motor next. If u were to come out with one of those engines I wouldn't hesitate to purchase from you
Yaay! You guys got the minarelli kits going. Yes, I'm spending half of my next paycheck for that. Yes! Thanks guys! A little more on the pocket book but I'm going for it! Again thanks!
First of all I'm going to say Thank you for making these engines affordable. I'm definitely going to buy a couple of them ASAP.. I got into this motorized bicycle fun a few years back and I just love it.
You get what you pay for. I bought a kit with the same intake and this one and it’s trash, welds didn’t last a month. Replaced with a CNC’D one from Smolikperformance. But the Minarelli overall is an awesome upgrade! That first time you gas it 😳💨 … would have to see the “balanced” crank myself to believe it…
You can take the jug off & look down inside for extra holes drilled in the crank. If you see extra holes drilled then you know it's better balanced than it was stock. It's damn near impossible I read to get a perfectly balanced crank. Since you'd have to factor in - cylinder pressure, ring drag, rod length, counter weight phasing,engine rpm,stroke length,bearing friction,secondary vibrations,static mass & rocking couples if more than 1 cylinder. That's a whole lotta crazy thinking but would be required/needed to win races where every fraction of a second counts....A much better balanced than stock motorized bike crank is still a big improvement though.
We will have limited stock beginning toward the end of February. Be sure to subscribe to our channel as well as the website to be alerted when they are for sale! Best of luck, thanks for watching, and happy building.
Love the Minarelli Motors I’m still building my Zuma but they are definitely reliable I sold my motorized bicycle I had a Chinese motor but this is a different beginning for bicycles and their motors upgrading love it💯
Also the clutch has worked fine. I made a super clutch thinking id news it but havent. Very reliable bike and good power. When this one goes out im gonna get the 70cc or do a stihl next
Few Ideas.....You can make the magneto magnet stronger by using a strong magnet and rubbing it across it (look for instructions online) Engine heat can slowly degrade it's magnetism. Since heat isn't good for the magnet & coil & running higher RPMs, higher compression, more fuel/air,etc... is going to create more heat. I was thinking about making a magneto "trap door" cover or air scoop that can be opened up when riding, to allow airflow across the magneto/coil but can also be covered up to keep water out. I suppose you could just take the cover off but isn't good for the bolt threads. Instead of using the clutch cover & magneto gaskets. I was gonna do a test & sand down both mating surface areas nice & smooth & even for a good aluminum to aluminum metal contact/seal, to see if more engine heat will travel to the covers. If the covers do get good and warm, I was gonna put a couple small heat sinks on them. I scrounged up from discarded electronics. Also wanna get around to making an aluminum cylinder head air scoop for cooling. Was gonna do a before & after temp. test on a stock head & beefier CNH head. The aluminum air scoop will be screwed onto the fins with small heat sink screws. So it might act as a heat sink/air scoop combo. Air scoops on old air cooled dirt bikes actually worked.
Any chance of any of the samples left for sale lol. Watch the show religiously by the way. You've taught me allot and I appreciate it. _------Thanks------_
Awesome can't wait to see what the whole setup is going to look like I just got a 2 stroke 80cc minarelli scooter but I never got to build the motorized bike I wanted but if this i reasonable I'll definitely get one I'll be keeping an eye out for the next upload or update 😁
Honestly was gonna skip over the minarelli and go right into a ktm 50 clone build because of the ludicrous pricing but if pricing rumors are true I will grab one of these bad boys first.
Why wouldn't yous go with a 52 mm piston on this kit.I have a "100" cc anbull thats comes with a 50 mm piston and that thing has crazy torque and with just home mods as in during hole in air filter top rips 43 with a 44 tooth sprocket .but it deff looks like a nice kit sweet!!
Dude this isn't a china doll anymore dust any 100cc china doll for sure I had a anbull I had running 45 fully ported with reed and I bought one of these bc this is so much more than a china doll promise
Dude, if you release this engine at a fair market price, you will sell a butt load of them. Will the engine come pretty much assembled? I look forward to seeing how they perform. Thanks!
You guys will see soon wat is a conversion the right way will blow your minds soon on my RUclips channel . Not just about power but about durability to
You did a great job. My only concern. You went to all that trouble to go over engine. You reinforced spokes to steel. Why not use Hub Adapters instead of rag joints?. I've seen back tires blow apart doing 40mph.
Thanks for watching. The kit will actually include the carb, the full engine, and a dyno MZ65 pipe. We will not be offering the cables, levers, and sprocket accessories. Just the guts! Hope you try it out!
Keep in mind that if you don't port this cylinders intake and exhaust right and hone it out ,,,it will run like crap an will not have hardly any power ,,honing is a must because if you don't the piston will cold seize ,,you Need to really do your home work these before spending 500.00 on any engine,,you can buy these parts yourself an build it for more than half that price
Since these kits will be supplied with a PZ20 carb will you also be offering jets for this carb? I have a PZ20 carb and I can't seem to find pilot jets anywhere for this carb. Someone suggested Gasbike. I actually bought one of their kits which has a Keihin Clone carb that looks exactly like a PZ20 along with the jets they offer for like $25 bucks. The main jets fit but the pilot jets don't fit either carb. Hope you offer jets for the PZ20.
Sounds good. Be sure to LIKE and SUBSCRIBE to both the RUclips and Website channels so that you will alerted when they go on sale! Look forward to your business. Thanks
Thanks for watching. The cylinder is the 49.9ccc BEFORE the riser and the long stroke. 47mm bore x 40mm long crank x 1 cylinder = 69.9cc. So, this is the 70cc hybrid on a 49.9cc jug. Hope that helps! Check is back out when they are for sale-limited quantity available in mid-February
You guys forgot something that's a jog bws scooter cilinder and does motors have a fan to cool off the cylinder that's metal not aluminum it will not last to long you can respond after you see the problems start coming. I do this everyday
I was looking at my Husqvarna 353 and thinking, when will someone work up a kit for chainsaw motors. My 353 is rated at 3.1 bhp and my 288 at over 7. Both being pro grade have rated lifespans of a minimum of 3,000 hours at full throttle. My 288 probably has over 5,000 hours and never needed anything besides a new fuel line and air filter.
How can I get one I emailed u guys I want one please let me know. I don't want it to be out of stock when it is available please let me know how to get one asap. Thanks for all you guys do I can't wait! Lol
Hey! Thanks for watching. Times being as they are, unfortunately, there is a shipping delay. It’s been like this for two years. We are just as anxious to get them to you as you are to wanting them. Should be a week or so. Soon….very soon! Thanks for your patience.
l10mm spacer is 20$ aliexpress / intake adaptor 10$ Aliexpress / Whole top end is 40$ aliexpress If you can't put the 3 on top of a 80cc lower half that cost 50$ Ebay. You deserve to pay 350$ for this LOL These parts have been pre made and ready to slap on a top end for years already. Just non of you realize this and pay stupid amounts cash to people that do know it. That is for a 70CC Minarelli not crap 50cc you see here! Eitherway after first 20 people slap these on Walmart bikes watching Hover videos the laws and regulations will come out in full force and hobby is dead.
ok so its still just a 50 cc . how will this preform against a 80 cc or the yd 100 . now i get that its made better its a moped head stuck on a china doll . its a cast iron set up . so it will last alot longer head wise any way . but sell me on this why should i buy a 50 cc over a yd 100 . or a pk 80 . now if it was on a yd100 case with all that extra stuff i would be excited . but a 50 . not so sure its worth the money . just saying . sure its quality thats what your going to tell me . and you might be right . but after the phantom i think alot of people are just ready for a motor that they can trust and will get it . man even at 200 dollars this is steep asking price for a 50 .
Hey thanks for watching! The iron cylinder is the 49.9cc jug. However, the stroke on this is 40mm….the cylinder is 47mm….1 cylinder… all of that equals 79.8cc…essentially an 80cc. The 49.9 was highlighted because some use the 70cc jug and the 110. Respectively, these are entry level race engines. The exhaust that will come with the package adds an extra 18% hp. These will be reliable and worth every penny.
@@diydarkmatter : I did not think that at all my friend. There will always be advances with these engines, if we can get them…we will sell them. It’ll be some time though…lol. Happy building
Just thought I could clear up the statement that a 40mm stroke plus a 47mm bore equals 79.something? My math indicates 69.397 ish. But hey I'm just curious. Otherwise the engine looks sharp....something that might actually be able to take high revs without scheduled cool down rest breaks(after break in). Best regards
Who sells a conversion kit for $500? Pretty sure your mistaken. The Olyn intake is absolutely trash. The “cnc spacer” is in fact laser cut, not cnc. That is 1000% bottom of the barrel Chinese cylinder ur talking up too. Stop misinforming people, Ethan sells a full race hybrid for $575. He actually likes that gomax sells engines tho, because 100% of the time people hit him up to replace their “broken after 1-2 rides” intake.
The cut away from yourself technique while using a utility knife is a government regulation standard when working in industrial setting. This guy is totally on top of his game. Nothing worse than seeing a person with a sharp object cutting towards themselves.
First off notice how the case isn’t port matched to the case. Second, ur advertising a Zl40mm as a 40mm stroke, when all current Zl40mm is 38mm stroke long rod. And lastly, skf is NOT top of the line. But rather, a quality budget bearing upgrade. I’d 1 million percent rather buy from Ethan, knowing that everything is done by him and that his customer service is second to none. Stop lying and misadvertising. Ur ruining the experience for first time hybrid buyers. Why don’t u mention the subpar intake will break 99% of the time? Smh
Hes back!!! First video in 5 months. Ive been waiting for this video forever. Nice to see he isn't dead
Lol. Nope not dead. Just nothing new. Shipping challenges, price increases, and lack of inventory has been the hold up. Got some great stuff around the corner!!!
I'll take one at the $325 price tag LAHover said you were going to sell them at, Smolik-performance sells the Minarelli upgrade kit for $265, which looks like a little better kit than what the DHL/DLH guy sells, this will be a great deal if your able to pull it off, thanks for sharing.
Smolik performance #1
californiamotorbikes sells full minarelli engines for $200. Got one, rebuilt it replaced bearings and some things, and so far with about 20 miles it ran ok. Did some port work as well, so now it makes probably about 2hp increase from the stock 6hp. Gotta adjust main clutch spring to grip better due to too much power, and/or upgrade clutch assembly
Had this motor like 2 years now. I had some issues back when I ordered the engine. And wasn't very hopefully. But I held out buying a minarelli engine. And I'm still happy with the engine. I've riden it a lot. And it's still going. I did some case matching. A little porting. Ummm really haven't changed much or did much and it's been a reliable engine. If your hesitant to buy. It's a good motor for a good price. Not a rip off or underhanded company. Thanx again. I'm looking into a ms460 ms660 motor next. If u were to come out with one of those engines I wouldn't hesitate to purchase from you
Let me know how it's holding up is the ms660 better??
SWEET! I can't wait to se what this little monster can do :D
Yaay! You guys got the minarelli kits going. Yes, I'm spending half of my next paycheck for that. Yes! Thanks guys! A little more on the pocket book but I'm going for it! Again thanks!
Just picked up one of these ...and it so clean..all the transfers are perfect..no casting errors...Can't wait to hear it scream💯🏍️💨💨💨
What's up how much money did you pay for it.
@@stevenharkreader7380 nope it was real...I've got this motor torn apart right now due to some bottom end failure.....good luck
I like it and it's already balanced sweet good to see you back
It's about time somebody came out with an engine it'll go faster than I want to know as soon as these come out I want to buy one
First of all I'm going to say Thank you for making these engines affordable. I'm definitely going to buy a couple of them ASAP.. I got into this motorized bicycle fun a few years back and I just love it.
Looks great!
You get what you pay for. I bought a kit with the same intake and this one and it’s trash, welds didn’t last a month. Replaced with a CNC’D one from Smolikperformance. But the Minarelli overall is an awesome upgrade! That first time you gas it 😳💨 … would have to see the “balanced” crank myself to believe it…
You can take the jug off & look down inside for extra holes drilled in the crank. If you see extra holes drilled then you know it's better balanced than it was stock. It's damn near impossible I read to get a perfectly balanced crank. Since you'd have to factor in - cylinder pressure, ring drag, rod length, counter weight phasing,engine rpm,stroke length,bearing friction,secondary vibrations,static mass & rocking couples if more than 1 cylinder. That's a whole lotta crazy thinking but would be required/needed to win races where every fraction of a second counts....A much better balanced than stock motorized bike crank is still a big improvement though.
Yes can't wait .....need this!!!
Thanks for watching! Look for the Easter Egg in the video… you might just get your wish 😉
Me too
I want one of these kids as soon as they come out or one of these engines been waiting for one of these for a long time let me know what's going on
Looks great. Would love to see a SAF clutch set up
It has been discussed. Maybe we can arrange something soon 😉
Let me know when they are for sale thanks Mark. Exactly what I was looking for perfect.
Engines are for sale! They will ship out Monday. Come and get it!
That’s awesome I seen hover got one from dlh, I can’t wait till I can get one myself to try and play with. Great job.
We will have limited stock beginning toward the end of February. Be sure to subscribe to our channel as well as the website to be alerted when they are for sale! Best of luck, thanks for watching, and happy building.
Love the Minarelli Motors I’m still building my Zuma but they are definitely reliable I sold my motorized bicycle I had a Chinese motor but this is a different beginning for bicycles and their motors upgrading love it💯
Also the clutch has worked fine. I made a super clutch thinking id news it but havent. Very reliable bike and good power. When this one goes out im gonna get the 70cc or do a stihl next
Few Ideas.....You can make the magneto magnet stronger by using a strong magnet and rubbing it across it (look for instructions online) Engine heat can slowly degrade it's magnetism.
Since heat isn't good for the magnet & coil & running higher RPMs, higher compression, more fuel/air,etc... is going to create more heat. I was thinking about making a magneto "trap door" cover or air scoop that can be opened up when riding, to allow airflow across the magneto/coil but can also be covered up to keep water out. I suppose you could just take the cover off but isn't good for the bolt threads.
Instead of using the clutch cover & magneto gaskets. I was gonna do a test & sand down both mating surface areas nice & smooth & even for a good aluminum to aluminum metal contact/seal, to see if more engine heat will travel to the covers. If the covers do get good and warm, I was gonna put a couple small heat sinks on them. I scrounged up from discarded electronics. Also wanna get around to making an aluminum cylinder head air scoop for cooling. Was gonna do a before & after temp. test on a stock head & beefier CNH head. The aluminum air scoop will be screwed onto the fins with small heat sink screws. So it might act as a heat sink/air scoop combo. Air scoops on old air cooled dirt bikes actually worked.
Yeah you know that things a beast my 66 bbr 80 the stroke and bore 39 x 46
I love it I'm ready to buy one now can't wait to put them till you put them on the market I'll take two
Engines are now for sale. Will ship out Monday! Come and get it!
Awesome stuff!
It is balanced crank .... Nice ....
Great video
Nice convercen! I'm waiting for the four stroke variant better sound when you build a older bike!
Love from Sweden. 🇸🇪❤️✨
Heeeelllll yeeeaaahhh!!!
Any chance of any of the samples left for sale lol. Watch the show religiously by the way. You've taught me allot and I appreciate it.
_------Thanks------_
Awesome can't wait to see what the whole setup is going to look like I just got a 2 stroke 80cc minarelli scooter but I never got to build the motorized bike I wanted but if this i reasonable I'll definitely get one I'll be keeping an eye out for the next upload or update 😁
Why does the piston look used?
will try to buy
Honestly was gonna skip over the minarelli and go right into a ktm 50 clone build because of the ludicrous pricing but if pricing rumors are true I will grab one of these bad boys first.
Engines are for sale! Come and get it!
Hey mark are they available or when are you going to have more in stock
I didn't see these on your site at all I think I'd like one.
Engines have arrived! Will begin to ship out tomorrow! Come and get it!
Why wouldn't yous go with a 52 mm piston on this kit.I have a "100" cc anbull thats comes with a 50 mm piston and that thing has crazy torque and with just home mods as in during hole in air filter top rips 43 with a 44 tooth sprocket .but it deff looks like a nice kit sweet!!
Dude this isn't a china doll anymore dust any 100cc china doll for sure I had a anbull I had running 45 fully ported with reed and I bought one of these bc this is so much more than a china doll promise
You should build a kit to turn the bike into a water cooled bike I can't really find anything for a stock motorized bicycle bottom piece
can you please sell exhaust adapters? I know so many people looking for a motorized bike to moped exhaust adapter
Like your video bud thanks good info
need to port the case to get any real performance. those walls will block airflow on the transfers. Nice kit otherwise
great news!
Dude, if you release this engine at a fair market price, you will sell a butt load of them. Will the engine come pretty much assembled? I look forward to seeing how they perform. Thanks!
You guys will see soon wat is a conversion the right way will blow your minds soon on my RUclips channel . Not just about power but about durability to
You did a great job. My only concern. You went to all that trouble to go over engine. You reinforced spokes to steel. Why not use Hub Adapters instead of rag joints?. I've seen back tires blow apart doing 40mph.
Thanks for watching. The kit will actually include the carb, the full engine, and a dyno MZ65 pipe. We will not be offering the cables, levers, and sprocket accessories. Just the guts! Hope you try it out!
What do you recommend for exhaust
Keep in mind that if you don't port this cylinders intake and exhaust right and hone it out ,,,it will run like crap an will not have hardly any power ,,honing is a must because if you don't the piston will cold seize ,,you Need to really do your home work these before spending 500.00 on any engine,,you can buy these parts yourself an build it for more than half that price
okay wait.. piston pointing to EXHAUST side?
Since these kits will be supplied with a PZ20 carb will you also be offering jets for this carb? I have a PZ20 carb and I can't seem to find pilot jets anywhere for this carb. Someone suggested Gasbike. I actually bought one of their kits which has a Keihin Clone carb that looks exactly like a PZ20 along with the jets they offer for like $25 bucks. The main jets fit but the pilot jets don't fit either carb. Hope you offer jets for the PZ20.
Is the cylinder iron
I want one and will be getting ahold of you...
Sounds good. Be sure to LIKE and SUBSCRIBE to both the RUclips and Website channels so that you will alerted when they go on sale! Look forward to your business. Thanks
Love to get one alas I am in Canada
Cheers buddy
dope dope dope
Need any help with any testing, let me know. I will be starting a channel soon, myself. I will purchase a kit.
What makes it a hybrid engine?
DO YOU KNOW ANY OME WHO BUILDS CRANK CASES OR DESIGNS
Why not the 70cc one?
Thanks for watching. The cylinder is the 49.9ccc BEFORE the riser and the long stroke.
47mm bore x 40mm long crank x 1 cylinder = 69.9cc.
So, this is the 70cc hybrid on a 49.9cc jug.
Hope that helps! Check is back out when they are for sale-limited quantity available in mid-February
@@SouthernCustomCC ahhh ok makes sense
Who is selling a conversion kit for $500? No one that I have seen.
Guys i have a question minerali or phantom 85 is better with more horsepower
CHUCK'S MOTORIZED BICYCLE REPAIRS
TAMPA FLORIDA
Gave you still got the bike engine if you have would you sell it to
You guys forgot something that's a jog bws scooter cilinder and does motors have a fan to cool off the cylinder that's metal not aluminum it will not last to long you can respond after you see the problems start coming. I do this everyday
I was looking at my Husqvarna 353 and thinking, when will someone work up a kit for chainsaw motors. My 353 is rated at 3.1 bhp and my 288 at over 7. Both being pro grade have rated lifespans of a minimum of 3,000 hours at full throttle. My 288 probably has over 5,000 hours and never needed anything besides a new fuel line and air filter.
You can't make a kit different bolt pattern but schuttle bike bikes build them and rdmau has a new case out to bolt some up
I want one
เสื้อสูบของรถป๊อป brio ใช่ไหม
How can I get one I emailed u guys I want one please let me know. I don't want it to be out of stock when it is available please let me know how to get one asap. Thanks for all you guys do I can't wait! Lol
Engines are here and now for sale! Shipping out Monday. Come and get it!
I've been waiting for the kits to come out. How much longer do I have to wait.
Hey! Thanks for watching. Times being as they are, unfortunately, there is a shipping delay. It’s been like this for two years. We are just as anxious to get them to you as you are to wanting them. Should be a week or so. Soon….very soon! Thanks for your patience.
@@SouthernCustomCC man that will be cool. I live in Northern Arizona and one of the very few that enjoy this hobby big time.
l10mm spacer is 20$ aliexpress / intake adaptor 10$ Aliexpress / Whole top end is 40$ aliexpress If you can't put the 3 on top of a 80cc lower half that cost 50$ Ebay. You deserve to pay 350$ for this LOL These parts have been pre made and ready to slap on a top end for years already. Just non of you realize this and pay stupid amounts cash to people that do know it. That is for a 70CC Minarelli not crap 50cc you see here! Eitherway after first 20 people slap these on Walmart bikes watching Hover videos the laws and regulations will come out in full force and hobby is dead.
How much aprocimate hp aproximately?? I need a high hp setup
>6
How do I get one!?
Contact me through my website. If you’d like one before they go on sale late February.
So it’s actually 69cc’s
ok so its still just a 50 cc . how will this preform against a 80 cc or the yd 100 . now i get that its made better its a moped head stuck on a china doll . its a cast iron set up . so it will last alot longer head wise any way . but sell me on this why should i buy a 50 cc over a yd 100 . or a pk 80 . now if it was on a yd100 case with all that extra stuff i would be excited . but a 50 . not so sure its worth the money . just saying . sure its quality thats what your going to tell me . and you might be right . but after the phantom i think alot of people are just ready for a motor that they can trust and will get it . man even at 200 dollars this is steep asking price for a 50 .
Hey thanks for watching! The iron cylinder is the 49.9cc jug. However, the stroke on this is 40mm….the cylinder is 47mm….1 cylinder… all of that equals 79.8cc…essentially an 80cc.
The 49.9 was highlighted because some use the 70cc jug and the 110. Respectively, these are entry level race engines. The exhaust that will come with the package adds an extra 18% hp. These will be reliable and worth every penny.
@@SouthernCustomCC ok well dont think i was being a jerk i wasn't . so if they make a 70cc and a 110 will there be a larger kit coming ?
@@diydarkmatter : I did not think that at all my friend. There will always be advances with these engines, if we can get them…we will sell them. It’ll be some time though…lol. Happy building
@@SouthernCustomCC thanks
Just thought I could clear up the statement that a 40mm stroke plus a 47mm bore equals 79.something? My math indicates 69.397 ish. But hey I'm just curious. Otherwise the engine looks sharp....something that might actually be able to take high revs without scheduled cool down rest breaks(after break in). Best regards
Where are you located do you have phone I can order from
Well, it's the Beginning of March and still nothing. 🤞 fingers crossed. Hopefully, this engine is not too good to be true.
Engines are in and for sale! Shipping out starting tomorrow! Come and get it
Who sells a conversion kit for $500? Pretty sure your mistaken. The Olyn intake is absolutely trash. The “cnc spacer” is in fact laser cut, not cnc. That is 1000% bottom of the barrel Chinese cylinder ur talking up too. Stop misinforming people, Ethan sells a full race hybrid for $575. He actually likes that gomax sells engines tho, because 100% of the time people hit him up to replace their “broken after 1-2 rides” intake.
The cut away from yourself technique while using a utility knife is a government regulation standard when working in industrial setting. This guy is totally on top of his game. Nothing worse than seeing a person with a sharp object cutting towards themselves.
Don't bother to purchase this engine. A Phantom 85 has a 52mm windowed piston, and is one good looking and performing engine. Go big, or go home!
1st like 👍
Thanks for watching! Make sure you look for the hidden Easter Egg in the video for a special treat!
@@SouthernCustomCC ok!
First off notice how the case isn’t port matched to the case. Second, ur advertising a Zl40mm as a 40mm stroke, when all current Zl40mm is 38mm stroke long rod. And lastly, skf is NOT top of the line. But rather, a quality budget bearing upgrade. I’d 1 million percent rather buy from Ethan, knowing that everything is done by him and that his customer service is second to none. Stop lying and misadvertising. Ur ruining the experience for first time hybrid buyers. Why don’t u mention the subpar intake will break 99% of the time? Smh
who is ethan where do i buy this
anything i can do to ensure failure doesnt occur??
Idk man,still a lot compared to smolik
What a joker 🤣
surely not 500$ just 485 plust tax and shipping! wasted my time! talk shit on others prices then you do the same? pos move imo