VTEC Cylinder Head Clean & Assemble | Satisfying Timelapse
HTML-код
- Опубликовано: 9 фев 2021
- In this video, we clean and assemble a PO8 sohc vtec cylinder head from a Honda D16Z6 engine in a timelapse style video.
In the previous video on this topic, we cleaned up the valves, polished the exhaust ports and painted the head.
This time we disassemble every component to clean and then reassembled.
Get a Honda Repair Manual Online - shrsl.com/40flk
22% OFF Any Manual - Use Code at Checkout: RISINGBOOST22
Affiliate link to helpful online repair manuals from eManualOnline. 
Авто/Мото
New to the d-series and had to rebuild one one week after purchasing my 96 civic. Your video here helped tons
Hi bro, glad it was helpful, hope you enjoy the car
"this will test your relationship" a few moments later "just buy the compressor tool" made me laugh !
Hi Daniel, yeah the timelapse probably did not show the true struggle that happened. also crawling on the floor looking for a keepers that went flying out.
@@RisingBoostYT i can imagine i saw a few attempts on the same one with a break in between i wouldnt even ask the mrs to help me so fair play you got there in the end 🤣 looking forward to the next video spent some time watching the full series keep up the good work!
Thanks for the support!
This inspired me to clean up a used z6 head for the d15b2 in my civic Ef hb. 👍 nicely done 8:51
Awesome bro, just keep in mind you will need plug wires from a z6 and an adjustable cam gear to get timing back to 0deg, also check what the compression ratio will be with this combo, you can use the zeal online tool
Loving this
Dude used a wrench to compress them springs that’s a true homie😂
At the time after the 3de keeper went flying I definitely wished that I just bought the tool rather
Love the vid. Just subscribed 👌🏽
Hi, glad you like it, thanks for the sub 👍
Nice build
Hi, Glad you think so!
Man translate pls my text. Чувак, благодаря тебе я влюбился в эту тачку🥺 Спасибо, и желаю тебе всего самого самого!♥️
Привет, чувак, круто, это отличные маленькие машинки для проектов, надеюсь, ты их приобретешь! спасибо и надеюсь, что и у вас все будет хорошо!
@@RisingBoostYT спасибо дружище!)
6:05 great there's a young mechanic helping. This video is giving to me the motivation for the project!
I have a question: how do you did with the ECU part? Having a Turbo involved, setting the right mixture air/fuel...
Also I found a rare Civic VTEC-E which is a 1.5 with a sort of eco-vtec, located 200km away
In my case, I fitted a very basic stand-alone ECU. that way I had full control over ignition timing and air / fuel. I did a video on installing it available on the channel.
keep in mind there is 2 versions of vtec-e, head-code "PO7" is a small intake runner head, bad for performance. but head-code "P2J" is a big runner head, meaning even though it is vtec-e it is still better than a non-vtec.
I know this video is old. But I’m looking to rebuild my D16Z6 soon. What is a good tool to install and remove the valve keepers? I know there are a lot of great tools for B-series engine. But I haven’t seen any specifically for D-series. Thanks and great content!
Hi bro, check for a universal spring compressor tool. Getting the retainers out is easy, getting them back in is a bit more challenging, a spring compressor tool will help alot.
are you using the factory oem valvesprings and retainers?
Hi Hummy. Yes this motor will be 100% stock. Not planning to push it past what it can handle in stock form, so I will be aiming for max 200whp. It's been doing very well at 163whp. But we now added vtec and a bit more boost. See how she handles that.
Hola sé que ah pasado ya tiempo de este video estoy armando un D16Y7 con cabeza de un D15ZC algún consejo para el vtec? O árbol de levas ? Quizás deba poner el de otra cabeza? Y excelente proyecto amigo 🤙🏻 saludos desde Tijuana🇲🇽
Hola David, no estoy familiarizado con el motor D15ZC, ¿es quizás el JDM D15B o el bloque solo tiene el sello ZC? siempre que sea un motor SOHC, las cabezas pueden intercambiarse y encajarán. Los cabezales de la serie D17 y DOHC D no se pueden usar en los motores D16/D15. verifique el código de la cabeza, P08 o P2J son cabezas vtec. P2J es mayor compresión.
@@RisingBoostYT si es error mío la cabeza es de D16ZC y el bloque es un Y7 con pistones nippon racing p06 creo que son tiene joroba pero no tanta algún consejo para un mejor desempeño para correr ? 🤔 saludos y éxelentes videos bro
What Grid Is That Sander You Using To Clean The Manifold surface?
Hi Zay, I used 320, afterward I used 600 just to be sure it's smooth.
Longshot but how do I know that my head is at tdc (d16y8) but by looking at the cam? I removed the gear and now I don’t know where I should set it
Hi Vicente, the key that holds the cam pulley in place should face UP. so where the cam pulley bolts onto the cam, there is a keyway cut into the cam. that must face UP.
I wish I had that engine for my Del Sol!!!! 🐹👻
Wish I had a Del Sol 👻
@@RisingBoostYT Maybe we could do a trade! OH wait... never mind!
Actually here to rehab my del sol D16Z6
🤤🤩waw
Hi Havl, glad you enjoyed it !!
does cleaning your engine pièces like that can extend the engine longevity?
Hi, maybe not extend, but if assembled dirty it can cause damage to bearings, journals and cam lobes if any dirt gets into your oil. it is always good to work clean when assembling. having dirt or metal shavings in oil passages can cause the engine to fail shortly after startup.
@@RisingBoostYT sorry I'm not native, I meant tearing apart your engine and cleaning it as opposed to let it untouched in the engine bay with carbon accumulated in its internals.
Hi @@masterjack8222 all good, I won't recommend disassembly just to clean, there are products available that you can use to help clean out carbon and sludge buildup. if a car is running as it should I would leave it "as is" unless the buildup is causing an issue. normally carbon buildup is a diesel engine problem, not so much petrol. I have seen really bad oil buildup on engine internals due to not changing oil, in a case like, that cleaning everything would help with longevity for sure.
Heard your not supposed to remove all the valve train pieces. Is the head running in a car?
Hi, yes head is running fine, been on the dyno a few times, videos on the channel, no issues with the head, I will say it does have a lot of small pieces that can go missing or be fitting wrong, so I also won't recommend it if it's not necessary to disassemble.
Is it possible to swap in a d16 vtec head with a non vtec zc d16 engine? Will it have vtec?
Hi, it depends on the ZC version. If it's a sohc it will work, the vtec trigger is controlled by the ecu. So you need an ecu and wire to trigger the vtec on/off. There is a dohc ZC similar to the D16A9. It won't work on a dohc Dseries
what is the right distance for the In and Ex valve clearances?
Hi Black Red, for D16Z6 (.007 -.009 intake) - (.009-.011 exhaust) adjust when cold.
Thank's you very much...
crazy how much carbon buildup was on the valves.
Absolutely, previous owners car must have been burning a lot of oil
Measurement Used For The Gap Of The Lifters?
Intake.....007-.009" (.17-.22mm)
Exhaust...009-.011" (.22-.27mm)
I used the biggest clearance as its a boosted application, so in my case it will see more heat.
do you have a whole parts list?
Hi John, sadly no, I was once able to get a parts list printout from a honda dealership for something else. perhaps you can get it for the head. I would definitely recommend making sure you have all the parts if you buy a head, there is loads of small parts on the cylinder head that can easily go missing like the keepers and retainers, the rockers also have small springs, spacers and locking pins. all things that is not easy to find unless you go to the dealer.
is this something you can do for me to my d16 head if i ship to you and pay for business inquiry??
Hi bro, sadly no i'm not really a mechanic, have a full time job, just working on my own stuff.
What are the tools called and cleaners u use to clean it like that
Hi Taco, at first I used the red 3M scuff pad and strong degreaser for the carbon buildup, for the internal parts I used aerosol Brake & Parts Cleaner. the Honda cylinder head can be assembled with a 10, 12 and 14mm socket.
Thank u for responding!!
You lost me when you lapped the valves with a drill. 😂
Sometimes we get lazy 🤣
@@RisingBoostYT it shows. It’s also great way to damage the valve guides…
What head is it ?
This is a D-series P08 sohc vtec head from a D16Z6
Can't wait to start building mine I got a d16z6 as well. So underrated
Get a stud remover
Hi, will look into that, did not know about it.
*[B]ASED.*
Thanks for watching Tommy! The [B] is coming soon.