@@ajsgarage3471 1) you got the link for fuse box on eBay? 2) What harness you use for $100? 3) And when you add the pins for the fuel pump can you show that!! No one on RUclips shows exactly how to do that!!! They talk around it and it pisses me off😂😂😂
www.ebay.com/sch/i.html?_nkw=5.3+fuse+block&_trksid=p2332490.m4084.l1313 www.ebay.com/sch/i.html?_nkw=5.3+stand+alone+harness&_trksid=p2334524.m4084.l1311&_odkw=5.3+fuse+block&_sacat=0 These the links to what you requested. Just pay close attention to harness and read the description close to ensure you order the correct one for what you have on your motor
Does the ignition wire stay hot?or just when you turn the key starting. Mines a 67 malibu body My oil pan 302.3 even with washers washers spacesthe motor up 3/8 inch. the oil pan is on the crossmember. I aint bought a harnesses yet. Driveby wire 03 yukon motor
Potentially you can yea I used all the factory gauges on my 84 C10. So if you have the analog gauges and not just the warning lights then they all should work. The temperature, the oil, the volts just used the factory wires from the vehicle and hook it up to the engine to read
Reason I refuse to pay them ridiculous prices when it’s like 5 wires
Exactly 💯
Same!
💯 Your a real one for this video bro. Straight to the point, simple info. Idk why everybody else make it seem so difficult. Appreciate the vid!
Yes sir 💯 super simply preciate the support 💪🏾👍🏾💯
Thanks for the great info. Keep the videos coming
Preciate it 💯
Thanks bro I needed this content
Thanks for tuning in more will be available once the engine is built to drop in stay tuned in 💯
great video bro
Preciate bro 💯
This all I needed. I'm bout to try to ls swap my box
Go for it bro very easy and simple
Thumbs up and new subscriber bro!! 🔥🔥🔥🔥🔥🔥 I’ll go through and give you a thumbs up on all your videos for giving us this info!!
Preciate the love bro 🖤💪🏾💯
@@ajsgarage3471 1) you got the link for fuse box on eBay? 2) What harness you use for $100? 3) And when you add the pins for the fuel pump can you show that!! No one on RUclips shows exactly how to do that!!! They talk around it and it pisses me off😂😂😂
www.ebay.com/sch/i.html?_nkw=5.3+fuse+block&_trksid=p2332490.m4084.l1313
www.ebay.com/sch/i.html?_nkw=5.3+stand+alone+harness&_trksid=p2334524.m4084.l1311&_odkw=5.3+fuse+block&_sacat=0
These the links to what you requested. Just pay close attention to harness and read the description close to ensure you order the correct one for what you have on your motor
Great video! Really helpful
Preciate it 💯
Great video fam 🔥🔥👍
Thanks 💯 💪🏾
Where you located bro
South Ga
You are a genius bro bro right on 👍🏾 for the video everybody else make it seem so difficult 🫡you made it look 👀 easy 💯🛞💨🏁
Preciate bro it's very simple nothing hard about it
Idk how I just gained so much confidence. 👍
Glad I could boost ya confidence stay tuned in more coming soon 💯🙏🏾
Thanks bro. I'm running the painless proformance ls swap harness. What about the neutral safety switch.
The harness should come with instructions for the power supply to the neutral switch pretty much just give it 12v ignition power
How did you handle the ECM? Did you have it flashed to remove the security on it or is that something we can do ourselves?
Have the computer flashed to remove all VATS and emissions
@@ajsgarage3471 I plan on buying HP tuner. I'm hoping I can do that myself. No idea if HP can even do that tho
Thank you bro I'm tuned in 2 you cuzzo...bigg ups to you...
Nice video, great information!
Does the ignition wire stay hot?or just when you turn the key starting.
Mines a 67 malibu body
My oil pan 302.3 even with washers washers spacesthe motor up 3/8 inch. the oil pan is on the crossmember.
I aint bought a harnesses yet.
Driveby wire 03 yukon motor
The ignition wire from the distributor is only hot when the key is on and/or cranking
Thanks
So u saying I can use stock gauges on the dash?
Potentially you can yea I used all the factory gauges on my 84 C10. So if you have the analog gauges and not just the warning lights then they all should work. The temperature, the oil, the volts just used the factory wires from the vehicle and hook it up to the engine to read
Best video hands down bro wats ya ig gotta ask u sum
Preciate it bro 💯💪🏾.....my IG is _yungking92_