You’re a fun and interesting informative teacher!! Great delivery! I learned you get a glossy outcome from a glossy mold or you get a matte outcome from a matte mold! Yay!!🎉
Great presentation Jorgan. Keep showing us how to avoid common mistakes. Emphasizing important points and injecting humor is done in a respectful and entertaining way. Thanks.
Fantastic! I am new to resin crafting and have wondered why my crafts ended up with a matte finish. The inside of the mold was matte instead of shiny because whoever made the mold used a matte master. Thank you for this! I can now move forward with confidence knowing what to expect, and I can expect to learn how to make my own molds when I can’t find exactly what I want.
I am doing a temporary finger sculpted master that is highly matte and was looking on ways to turn its casting into a glossy permanent master for a translucent casting I'm working on. Thanks for giving me the knowledge to get there!
If I create a matte casting and sand it down afterwards, will it become glossy? I am avoiding the glossy look but love the soft textiles on my projects.
Thank you!!! You inspired me to look into mold, casting etc… I have to see if I can incorporate this skill set into my wood working business. 👍and I subscribed looking forward to your other videos. Thanks again!!!!!
Great video. When the master is not available again, is there a way to prepare a silicone mold to get a glossy finish for making a crystal clear casting?
Super informative! Does anybody know where I can find a high gloss flat silicone mat for casting flat reflective letters on with an outline mold? I’ve been looking everywhere!
Loved the instruction in your video glad to have found this channel. However I do have a question. Is it possible to influence the actually Mould that you cast into. For example if the master was, let’s say a matte finish and it produces a Matt mold,…could you in some way influence the Matt mold with a gloss spray or by some other method, so as to produce a high gloss finish?
Could I use a clear gloss coat spray paint on my master to create a high shine mold from? Or is a resin clear coat(or sanding) the only option for making my matte master shiny ?
I've used a couple of coats of spray varnish when I have made a polymer clay master. The castings have turned out with a nice sheen. I've also used Triple Thick, which is great for making a shiny master, as long as there isn't fine detail.
Loved your video! I have a question about the product you’re using. Does it stand up to hot and cold or would it crack under hot or cold water if submerged? Thanks for your time 😊Stacy
Great question! 😊 Amazing Mold Maker is a platinum-cured silicone that's durable and flexible, making it perfect for creating highly detailed molds. It’s also designed to handle a wide range of temperatures, but there are a few key points to keep in mind when it comes to hot and cold exposure: Heat Resistance 🌡: Amazing Mold Maker can withstand moderate heat up to about 450°F (232°C), so it should handle warm to hot water or even materials like melted wax and low-temp casting resins without any issues. However, it is not recommended for very high temperatures like those from molten metals, which could damage the mold. Cold Resistance ❄: It also holds up well under cold temperatures and can be safely exposed to freezing conditions without cracking or becoming brittle. If you submerge it in cold water or even place it in the freezer, it should remain flexible and durable. Submersion in Water 💧: When submerged in hot or cold water, Amazing Mold Maker should not crack, but it's worth noting that extreme or rapid temperature changes could put stress on the material over time. If you’re repeatedly submerging the mold in boiling water or freezing temperatures, it might affect its lifespan eventually, but for typical hot/cold water exposure, you should be good to go!
@@AlumiliteCorporation Wow, thank you so much for your quick reply. I would like to learn more about using products to manufacture custom sink stoppers with monogram letters or even smilie faces. I had a vision of brushing my teeth each morning and seeing a smiley face in my sink. Do you work with individuals on designing products? Ty for your time Stacy
Amazing! Thank you! I've a VW camper mould that comes out matt. I'd love them to be glossy, so if I brush on a layer of resin on a cast and then make a mould, it should come out glossy.....thank you, I'll give it a go 😁 Great videos BTW.....I've a question about colouring polyurethane resin. As it has a short pot life, can I mix the pigment into part A, spend some time getting it lovely and evenly mixed and then add part B? Or will it upset the whole process?
Thanks for the video! Really insightful. I have a question, to make it glossier, how do you go about evenly top coating your master ? I see tutorials how to top coat completely flat surfaces but nothing on stuff with bumps and edges and slopes. Thanks again!
Very nice! Is there a best practice, if you are using a top coat, to avoid that puddle of resin you get at the base of your master (or whatever you are coating)?
Do SUPER thin layers! We're talking dip your gloved hand in some epoxy and rub it on. You may have to do this a few times, but it shouldn't pool at the bottom!
@@AlumiliteCorporation Hmm. When I try super thin layers, it seems to bead up a little on the surface and I don't get full coverage. I tried cleaning the surface with alcohol first, but that didn't help. I tried waiting 15 mins for the epoxy to gel slightly, and that helped, but wasn't great for my details, and I still didn't get perfect coverage. Am I missing something? Thanks!
Hey Jordan, I have a question about the silicone! You know how some silicone products are of such high gloss that they become “sticky”? Yet some silicone products are so matte and “smooth”, they slide off of things? Do I achieve matte silicone finish by casting my silicone in/on a matte object? I’m perplexed because I’ve tried casting silicone on matte surfaces, but they still turn out super glossy and “sticky”. I want a matte finish without having to coat it in baby powder…
Great question, and I totally understand your goal! Achieving a matte finish on silicone without it turning sticky or glossy can be a bit tricky, but you've got options! 🌟 Here’s what’s going on and how to get that beautiful matte look you’re after. Silicone naturally cures to a glossy finish, regardless of the surface it’s cast on. So, even if you’re pouring it onto a matte or textured object, the silicone will often “fill in” and smooth over those details, giving it a shiny finish. But don’t worry-there are a couple of techniques that can help you achieve that matte look: 1. Matte Mold Release Spray 🖌 Using a matte finish mold release spray can help cut down on the gloss. Spraying your mold with a matte silicone mold release will create a more matte surface on the cured silicone. This also prevents that “sticky” gloss finish you’re describing, so it won’t need a powder coat afterward. 2. Textured or Matte-Finished Mold Material 🧊 Using certain mold materials, like ones that naturally have a matte finish, may give you closer results to what you’re looking for. For example, if you make a mold from a matte-finished silicone itself, the matte effect is more likely to transfer to your casting silicone. 3. Adding a Matting Agent 💡 There are additives specifically designed for silicone that can produce a matte effect. You’d mix these directly into your silicone before pouring, which can help reduce the glossiness in the final product. 4. Light Sanding After Cure 🔧 If you don’t mind a bit of post-processing, gently sanding the cured silicone with a very fine-grit sandpaper can help reduce the shine. This way, you get the matte look without adding powders or additional coatings. Each of these methods can help you achieve a matte, smooth silicone finish without that sticky gloss. Feel free to reach out if you’d like more specific recommendations on mold releases or additives that work well with our silicone products. 😊 For any other questions or to get support on your project, we're here for you! Just call (269) 488-4000 or email us at info@alumilite.com. Let’s make this matte magic happen! 🎨✨
I'm new to resin and was wondering if you cover the terra cotta base in gloss spray paint or spray varnish and make a mold, that would make the castings glossy as well?
The silicone will mimic the surface of the object you're casting so it all depends on whether or not the gloss spray paint/varnish is compatible with the terra cotta base.
@@AlumiliteCorporation So with something that is rough or has surface texture would you recommend putting a thin layer of resin to smooth it or would an enamel/gloss paint work better? Even at 40 micron layer lines I can still see marks in the molds, with previous silicone.
instead of sanding or coating the master in epoxy, would airbrushing a couple coats of gloss or matte work, I wonder? Or maybe electroplating the object?
Very helpful Jordan. Can we take a glossy master mold to make a frosted mold? By spraying the inside of a glossy mold? I don't know of any Matt spray that would stick to silicone though. I read that some mold release can leave a texture.
Hmm.. this is a great question! We know there are Top Coat epoxy products out there that you can use on a glassy surface to make it matte (check out StoneCoatCountertop's Ultimate Top Coat) - but we're not sure about getting the result straight from a glossy mold. It's definitely something we would have to experiment with!
Just started casting pen blanks with Alumilite Clear and noticed a spiderweb effect from the mold release. How do I clean up and polish my blanks to sell? I'm using pvc tubes as a mold.
Hmm, we've never heard of this happening with Our Alumilite Clear. We would recommend reaching out to our technical services team at info@alumilite.com for help - they should be able to figure out what's going on and find a solution for you!
can you pour silicone rubber on styrofoam? Or does the foam melt or give a reaction? If you can use styrofoam as a master, what can you use to fill all the holes in it?
A great fact about silicone is that it doesn't use heat to cure so it won't melt whatever you're pouring onto! To fill the holes is a whole other matter...you could try a spray sealer or a thin epoxy coat.
You'll probably never see this comment as this was a year ago.... And you probably already know this as well but I'm gonna say it anyway.... YOU SIR ARE A *&¢%[π& GENIUS! in the way this was this was demonstrated and explained explained. Thank you for making this finally make sense!
We're sorry if we came off as a little condescending - we just want to make sure that everyone of all levels is able to understand the topic! We appreciate the feedback on this though!!
You’re a fun and interesting informative teacher!! Great delivery! I learned you get a glossy outcome from a glossy mold or you get a matte outcome from a matte mold! Yay!!🎉
So glad you enjoyed!
Great presentation Jorgan. Keep showing us how to avoid common mistakes. Emphasizing important points and injecting humor is done in a respectful and entertaining way. Thanks.
Literally the best teacher on RUclips
Everyone always seems to be focused on shine, but matte is something interesting to explore. Might have to try it soon.
This was very helpful, the time you took to share the transparencies meant everything for me, or is it difficult to find DIY’s so well done! Thanks
Fantastic! I am new to resin crafting and have wondered why my crafts ended up with a matte finish. The inside of the mold was matte instead of shiny because whoever made the mold used a matte master. Thank you for this! I can now move forward with confidence knowing what to expect, and I can expect to learn how to make my own molds when I can’t find exactly what I want.
We're glad we could help! Let us know if there's a topic you want to know more about - we're always looking for new video ideas!
Bloody outstanding vid mate! Cheers from Australia.
I am doing a temporary finger sculpted master that is highly matte and was looking on ways to turn its casting into a glossy permanent master for a translucent casting I'm working on. Thanks for giving me the knowledge to get there!
Very well explained and easy to listen to. Many thanks
Hey jordan I learned alot please keep doing these.
Thanks! Good info!
Good job Jordan ... I certainly learned something.
Hey Jordan! I’ve learned a ton!! Keep up the great work. So easy and right to the point.
Thanks so much - glad you enjoyed it!
Awesome work, great labour and amazing teacher
Hi Jordan! Thanks for the video. I did learn a lot.
Awesome video!! Excellent tip on how to make a matte object glossy before making a mold!!
Thanks so much 😊
Really cool stuff Man. Enjoyed the lesson.
If I create a matte casting and sand it down afterwards, will it become glossy? I am avoiding the glossy look but love the soft textiles on my projects.
Perfect 👌 exactly what I needed, thank you so much 🙌, you're brilliant 👍
Thank you thank you for this video! Subscribed!
Thank you!!! You inspired me to look into mold, casting etc… I have to see if I can incorporate this skill set into my wood working business. 👍and I subscribed looking forward to your other videos.
Thanks again!!!!!
Great video. When the master is not available again, is there a way to prepare a silicone mold to get a glossy finish for making a crystal clear casting?
As always...awesome content
Thanks Jerry! Hope you're well :)
Helpful info! Thanks
Thanks for watching!
This is the kind of exchange I like to see! Subbed to you both!!❤️🥰❤️
I learned a lot thank you
Super informative! Does anybody know where I can find a high gloss flat silicone mat for casting flat reflective letters on with an outline mold? I’ve been looking everywhere!
This was soooooo good! Thanks! It cleared everything up…I just had to! 😂😂😂
Loved the instruction in your video glad to have found this channel. However I do have a question. Is it possible to influence the actually Mould that you cast into. For example if the master was, let’s say a matte finish and it produces a Matt mold,…could you in some way influence the Matt mold with a gloss spray or by some other method, so as to produce a high gloss finish?
Thank you for making these videos, I’ve learned a lot with them!!! ❤️🤗❤️
Glad you like them!
Got it, makes total sense! Great explanation and a great video!
Thanks for sharing!
- Seth
Glad it was helpful!
Very helpful 👌
You’re awesome dude keep it up
Very helpful
Could I use a clear gloss coat spray paint on my master to create a high shine mold from? Or is a resin clear coat(or sanding) the only option for making my matte master shiny ?
I've used a couple of coats of spray varnish when I have made a polymer clay master. The castings have turned out with a nice sheen. I've also used Triple Thick, which is great for making a shiny master, as long as there isn't fine detail.
Great tips!! 👍👍
Thanks Jake!
Loved your video! I have a question about the product you’re using. Does it stand up to hot and cold or would it crack under hot or cold water if submerged?
Thanks for your time 😊Stacy
Great question! 😊 Amazing Mold Maker is a platinum-cured silicone that's durable and flexible, making it perfect for creating highly detailed molds. It’s also designed to handle a wide range of temperatures, but there are a few key points to keep in mind when it comes to hot and cold exposure:
Heat Resistance 🌡:
Amazing Mold Maker can withstand moderate heat up to about 450°F (232°C), so it should handle warm to hot water or even materials like melted wax and low-temp casting resins without any issues.
However, it is not recommended for very high temperatures like those from molten metals, which could damage the mold.
Cold Resistance ❄:
It also holds up well under cold temperatures and can be safely exposed to freezing conditions without cracking or becoming brittle. If you submerge it in cold water or even place it in the freezer, it should remain flexible and durable.
Submersion in Water 💧:
When submerged in hot or cold water, Amazing Mold Maker should not crack, but it's worth noting that extreme or rapid temperature changes could put stress on the material over time. If you’re repeatedly submerging the mold in boiling water or freezing temperatures, it might affect its lifespan eventually, but for typical hot/cold water exposure, you should be good to go!
@@AlumiliteCorporation Wow, thank you so much for your quick reply. I would like to learn more about using products to manufacture custom sink stoppers with monogram letters or even smilie faces. I had a vision of brushing my teeth each morning and seeing a smiley face in my sink. Do you work with individuals on designing products? Ty for your time Stacy
Perfect!
Amazing! Thank you! I've a VW camper mould that comes out matt. I'd love them to be glossy, so if I brush on a layer of resin on a cast and then make a mould, it should come out glossy.....thank you, I'll give it a go 😁 Great videos BTW.....I've a question about colouring polyurethane resin. As it has a short pot life, can I mix the pigment into part A, spend some time getting it lovely and evenly mixed and then add part B? Or will it upset the whole process?
Yes Aileen, you can add the coloring that way! Great idea!
Thanks for the video! Really insightful. I have a question, to make it glossier, how do you go about evenly top coating your master ? I see tutorials how to top coat completely flat surfaces but nothing on stuff with bumps and edges and slopes. Thanks again!
Really useful - thanks :)
Can I put a 2k max gloss clear coat over the object I wanna make a mold from? Or does that some mess with the silicone?
Great info. Thanks!
Thanks for watching!
Very nice!
Is there a best practice, if you are using a top coat, to avoid that puddle of resin you get at the base of your master (or whatever you are coating)?
Do SUPER thin layers! We're talking dip your gloved hand in some epoxy and rub it on. You may have to do this a few times, but it shouldn't pool at the bottom!
@@AlumiliteCorporation Hmm. When I try super thin layers, it seems to bead up a little on the surface and I don't get full coverage. I tried cleaning the surface with alcohol first, but that didn't help. I tried waiting 15 mins for the epoxy to gel slightly, and that helped, but wasn't great for my details, and I still didn't get perfect coverage. Am I missing something? Thanks!
Keep goin man i love to learn from you 🙏🙏
We've got you! Keep an eye out for another video soon!
Hey Jordan, I have a question about the silicone!
You know how some silicone products are of such high gloss that they become “sticky”?
Yet some silicone products are so matte and “smooth”, they slide off of things?
Do I achieve matte silicone finish by casting my silicone in/on a matte object?
I’m perplexed because I’ve tried casting silicone on matte surfaces, but they still turn out super glossy and “sticky”.
I want a matte finish without having to coat it in baby powder…
Great question, and I totally understand your goal! Achieving a matte finish on silicone without it turning sticky or glossy can be a bit tricky, but you've got options! 🌟 Here’s what’s going on and how to get that beautiful matte look you’re after.
Silicone naturally cures to a glossy finish, regardless of the surface it’s cast on. So, even if you’re pouring it onto a matte or textured object, the silicone will often “fill in” and smooth over those details, giving it a shiny finish. But don’t worry-there are a couple of techniques that can help you achieve that matte look:
1. Matte Mold Release Spray 🖌
Using a matte finish mold release spray can help cut down on the gloss. Spraying your mold with a matte silicone mold release will create a more matte surface on the cured silicone. This also prevents that “sticky” gloss finish you’re describing, so it won’t need a powder coat afterward.
2. Textured or Matte-Finished Mold Material 🧊
Using certain mold materials, like ones that naturally have a matte finish, may give you closer results to what you’re looking for. For example, if you make a mold from a matte-finished silicone itself, the matte effect is more likely to transfer to your casting silicone.
3. Adding a Matting Agent 💡
There are additives specifically designed for silicone that can produce a matte effect. You’d mix these directly into your silicone before pouring, which can help reduce the glossiness in the final product.
4. Light Sanding After Cure 🔧
If you don’t mind a bit of post-processing, gently sanding the cured silicone with a very fine-grit sandpaper can help reduce the shine. This way, you get the matte look without adding powders or additional coatings.
Each of these methods can help you achieve a matte, smooth silicone finish without that sticky gloss. Feel free to reach out if you’d like more specific recommendations on mold releases or additives that work well with our silicone products. 😊
For any other questions or to get support on your project, we're here for you! Just call (269) 488-4000 or email us at info@alumilite.com. Let’s make this matte magic happen! 🎨✨
I'm new to resin and was wondering if you cover the terra cotta base in gloss spray paint or spray varnish and make a mold, that would make the castings glossy as well?
The silicone will mimic the surface of the object you're casting so it all depends on whether or not the gloss spray paint/varnish is compatible with the terra cotta base.
@@AlumiliteCorporation So with something that is rough or has surface texture would you recommend putting a thin layer of resin to smooth it or would an enamel/gloss paint work better? Even at 40 micron layer lines I can still see marks in the molds, with previous silicone.
instead of sanding or coating the master in epoxy, would airbrushing a couple coats of gloss or matte work, I wonder? Or maybe electroplating the object?
Definitely interesting it could work! Not 100% sure since we've never tried that method.
Off topic question.
How can I get rid of the lip created by the surface tension on open molds? Will a pressure pot solve this problem?
thx jordan
Glossy 👌
Very helpful Jordan. Can we take a glossy master mold to make a frosted mold? By spraying the inside of a glossy mold? I don't know of any Matt spray that would stick to silicone though. I read that some mold release can leave a texture.
Hmm.. this is a great question! We know there are Top Coat epoxy products out there that you can use on a glassy surface to make it matte (check out StoneCoatCountertop's Ultimate Top Coat) - but we're not sure about getting the result straight from a glossy mold. It's definitely something we would have to experiment with!
Just started casting pen blanks with Alumilite Clear and noticed a spiderweb effect from the mold release. How do I clean up and polish my blanks to sell? I'm using pvc tubes as a mold.
Hmm, we've never heard of this happening with Our Alumilite Clear. We would recommend reaching out to our technical services team at info@alumilite.com for help - they should be able to figure out what's going on and find a solution for you!
can you pour silicone rubber on styrofoam? Or does the foam melt or give a reaction? If you can use styrofoam as a master, what can you use to fill all the holes in it?
A great fact about silicone is that it doesn't use heat to cure so it won't melt whatever you're pouring onto! To fill the holes is a whole other matter...you could try a spray sealer or a thin epoxy coat.
I like these videos
We glad!! Let us know if there's another topic you want to hear more about!
❤
Any other way to make a glass master matte without sanding the master?
🙏
You'll probably never see this comment as this was a year ago.... And you probably already know this as well but I'm gonna say it anyway.... YOU SIR ARE A *&¢%[π& GENIUS! in the way this was this was demonstrated and explained explained. Thank you for making this finally make sense!
OK I UNDERSTOOD SOME OFF IT BUT STILL CONFUSED ABOUT THE GLOSSY AND NON GLOSSY FINISH
Sorry about that Peggy, let us know how we can help clear it up!
Well, for everyone, you can always use a polyethylene clear coat. If there are no bubbles it will become really clear!
I wasn't aware you could find it in clear coat? Is this like automotive stuff?
Common 'science', thanks
learning bro, just learning...
Good video but nothing but the obvious. Was hoping for a trade secret
2:14 come on, don't talk to us like that... were watching already, we don't need you clapping down to us.
We're sorry if we came off as a little condescending - we just want to make sure that everyone of all levels is able to understand the topic! We appreciate the feedback on this though!!
Literally the best teacher on RUclips