Fuel Pressure Regulators Explained [GO FAST BRETT]
HTML-код
- Опубликовано: 6 окт 2024
- Fuel Pressure Regulators - What do they do and how do they work? Today we find out on Go Fast Brett!
This series is proudly brought to you by Mighty Car Mods and GFB
www.gfb.com.au
www.mightycarm...
As always, totally nailed it, Brett!
This is the most clear explanation i could find of a fpr. Helped me a lot, thanks
Loving this series! Keep it up!
Brett has done an outstanding job of explaining it in an easy-to-understand way. Great work guys!
Finally I got it, Thank you very much, simple but well explained
Awesome explanation Brett, especially the bit about how there is more pressure at idle which is the opposite of what most think.
Likely the best explaination on youtube
I bet Rake loves this.
mate what happened to rake! i miss that bloke
KAVINSKY311 works for tesla
Thats Mausworks
I think I know, and then you teach me more and then describe what I thought I knew even better, to where I completely understand it.. Absolutely love this series, great stuff.. PS I just got my Chopped key chain and it looks great attached to the keys of the FRS I just bought (finally! 😃), Cheers!
Such a solid clear explanation as always
These video are so extreamly well done and helpfull. Can't thank you enough!
Love the Go Fast series. Learn a lot from these vids
Excellent presentation - I had to explain the same thing to a friend who's needle and seats wouldn't hold back the pressure of his new pump; tiny NA engines do not need heaps of fuel pressure.. eventually, he ended up switching back to a mechanical pump, but kept the regulator. Go figure.
love this series! keep up the good work!
I love go fast Brett videos helps heaps with figuring out shit
Beautiful explaination I have ever seen ..
Pls do more such videos
Excellent explanation. Now I know why I need a better PFR. Thanks!
Excellent explanation!!! Thanks 👍🏾👍🏾👍🏾
Great series. I learn lots from these. Keep 'em comming.
Great video! Thank you for explanation.
Very well put together
Great video, perfectly explained. Thanks!
Very good explanation but you didn't mention one key aspect. Your FPR holds system pressure AFTER the fuel pump has finished priming to start or has been shut down after running. The hardest thing to tune with an aftermarket management system is the fuel pulse and cranking enrichments with a cold engine if the fuel rail pressure isn't maintained or held consistent after priming. A slow fuel system pressure bleed down is ok ie 5 minutes but when system pressure drops in a matter of seconds, the only way to avoid the problem is to crank the engine to start whilst the pump is priming...and this isn't always feasible or desired. It would be good if you could create to a video of this to show your future customers looking for an acceptable replacement regulator that is similar in characteristics to the OEM regs. After using a Malpassi and TurboSmart FPR's, it's this feature that is by far the most important and made my decision to buy your FPR the logical choice. Thanks.
Can you talk about fuel setups where the regulator is put before and after the fuel rail.... pros & cons?
You never put the reg before the rail, always after.
that would be a non return fuel system
I have something similar question, the engine i got swapped in had a returnt line and the pressure regulator after the rail, but my stock system have the valve itself on the pump station in gas tank (with no return line). I blocked the outlet socket on rail, screwed in the damper from my stock system before rail and now i dont know how engine feels about it...
and I have in the past... but after hearing MCM talk about why they did (semi return setup... as they called it) on super gramps. I'd like to hear more about it.
Not true, although the majority of cars have the regulator after the rail, some have regulators that t off before the rail to maintain consistent pressure.
Great video and explanations!
Hey I learned something!
Nerd
Nicely said. Same principle as my methanol injection.
great lessons Bret! can I request a lesson on how to read a turbo surge map??? thanks
Thanks
I installed some id1000 injectors with a dw200 pump to spin my td06sl2 @22psi on flex. Stock fpr is good enough. :)
Good info
Why didn't you explain how to know what size regulator you would need and/or how to figure that out?
So does it benefit to upgrade your fuel pressure regulator, even if you don't upgrade your fuel pump?
what if fuel pressure regulator leaking does it needs to be replaced or turned up and should it be replaced with bigger regulator
This might be a stupid question but what exactly is fuel pressure?
MCM TV2, if my fuel pump is bigger than the stock and I'm running stock injectors...
Can this combo create a p0300-code (misfire) to show...
And if yes, can I use a fuel pressure regulator to correct this issue (p0300-code)...
Hi Brett, In the event of rising fuel pressure beyond what the FPR can bleed off would the ecu not just reduce the duty cycle of the pump? Or is this not an optimum solution due to the time it takes for the pump to change speeds?
Hey brett, is this unit capable of adding different amounts of fuel pressure with increased boost? Or does it only add 1psi of fuel for each addition psi in the manifold?
Is the outlet port of the pressure regulator the return line?
What operates the regulator at full throttle when there is no vacuum in the intake manifold
Hi, help if possible. I believe I need a fuel pressure regulator. I installed a fuel tank/cell + pump etc in our rally project. First pump went pretty quick, stopped pumping. After getting advice I learned it's a returnless system. Pump was flowing too high without releasing unwanted pressure. Is any inline pump ok but just needs the correct pressure via regulatory value? Car worked 100% with original tank/pump so I know I have caused this issue. Can you help? It's an efi dohc engine. M15a ignis sport
What about direct injection?
Not sure it matters too much - the rail is just in a different place. Higher pressure is usually required but it should be the same basic principle.
Brett, you just made me really confused... how does a carburated turbo system work?!?! Since they rely on vacuum to pull fuel in, this confuses me.
Dan Borgschulze It depends on if it's a blow through carb or a standard carb in a box. The blow through carb has ports that will reference the boost and put pressure in the fuel bowls as well as some special valving to work with the boost. A carb in a box is usually standard since the box is pressurized it will apply pressure to everything so the carb doesn't need much special, but you'll need to have a regulator like in the video since the fuel going in will have to push against the boost.
how do you know what base fuel pressure to run?
Question:
75hp N/A with unknown fuel pressure (in between 1-3-5bar).
Will the regulator (if set correctly) increase horsepower significantly enough to justify the cost?
All increasing the fuel pressure does is make your fuel injectors flow a little bit more fuel. Unless you done a bunch of air flow mods its just going to make your car run too rich.
I'm looking for a dirty cheap upgrade, that would bump up the power, but neither ruin the budget or fuel economy.
I know, I know, Power = Fuel, More power = More fuel.
But since its just (DA)SOHC with 8v, I'm not expecting high gains. ECU is useless without other mods such as flowed head, intake mods, mild camshaft, exhaust etc.
It's VW AEE engine, if you desire to be exact.
Like a said before chaining the fuel pressure is just going to make your car use more fuel and run like crap because its running too rich. Just save your money and buy mods that will help the engine breath better.
I've a stage 2 on my 1.8T,car feels good on boost with a 3 bar regulator but I was told to upgrade to a 4 Bar which I've bought but yet to install,any advice please..
Why fuel pressure regulator increases the pressure of fuel inside the fuel rail when accelerating...??
I take it this is only valid for petrol car ? Not for commonrail diesel ?
is there a good solution to adjustable fuel regulation on a returnless system
Not that I'm aware of. With my Focus that I installed a turbo on, I'm pretty sure my tuner just had to work around that limitation of a returnless fuel system. But I'm not running a huge amount of psi or power, so it probably wasn't a huge deal anyway.
same thing mate I have a turbo'd swift with a returnless system has a gss340 walbro pump fitted
I think an external surge setup with a custom rail and return would be the only solution
imactownkkid Usually the best solution is to go aftermarket and build your own fuel system. But, if you're not pushing a lot of boost you can compensate with tuning. You'll basically just have to increase the duty cycle of the injectors to make up for the drop in effective fuel pressure. You'll run out of injector quickly this way so may have to get bigger ones.
There are also piggyback fuel pump systems that can kick in with boost to get the extra pressure and flow needed. But, they're usually more of a bandaid than a long term solution.
NBSV1 injectors are upgraded to 550cc unsure what duty they're running at
afr's stay steady across the rev range at peak rpm it leans slightly
hoping to turn the boost up a bit don't want it leaning earlier
will have to check out a custom intank setup or external surge that should sort it, hopefully ✌
Can you regulate fuel pressure only using the pump? or without having a regulator the bypasses the excess fuel?
Dinklemin Some newer cars will modulate power to the pump to slow it down, but I think they still have a regulator in the tank. I would expect slowing the pump enough to fully control pressure at idle or low load would cause a lean condition if you hit the throttle as the pump would have to speed up and push all the fuel in the line to react.
Yes, a returnless fuel system
All things being stock on an n/a engine, will a higher flow capacity fuel regulator benefit in economy or performance situations?
it will add nothing but bling factor.
The only real thing I'm looking for is economy... Somehow, after 13 years, the little xB is only getting 24mpg... meh... I had speculated a few years ago once I started noticing I'm missing half a dozen mpg that upgrading the entire fuel system would help with economy but the money never came.
Really interested in fuel systems again since one of my '66 Fords needs an tank mat (sucks air in turns), electric pump, block off plate, and a regulator. The carb is now too big for the stock pump
dumb me gonna ask dumb question:
my gf drives an astra... the thing always drives a bit TO lean... it's a uber simple 1.6 8V and have been wondering if a fuel pressure regulator could possibly fix this? or will the ecu just screw me over on this? (yes she has a new lambda)
I'd be curious about how this works with returnless systems?
Morgan Reed The returnless systems still have a regulator. It's just usually built into the fuel pump assembly. You can sometimes remove the factory regulator and install an aftermarket one if needed.
A returnless system uses a bypass at the pump. Once fuel pressure reaches a certain amount it lowers or stops pumping fuel into the lines.
Thanks, never really "got" how this could work, but a bypass at the pump makes sense.
Even timed served mechanics will learn off this... and the rrst of his videos... unless you do his kinda job
2:45
um thats a few too many hose adaptors
Stop making me smarter, Go Fast Brett.
Hey
Why are diesel injectors longer then petrol?????????????
Diesels run at stupid-high pressures compared to gas, so the injectors need to be bigger. IIRC they run at like 1500psi, but gas engines run around 60psi
They are completely different, mount in the head, etc. Common rail injectors can work with up to 30,000 PSI
I feel faster
about to crack up 3:30 ?
I don't know why, but you look so miserable in this video. Like upset/sad or something.
Great video regardless, very informative!
I think Brett looks hung over or tired, are you ok buddy?
His eyes are red. Maybe allergies, or he just got hammered drunk the night before
He's been like that since the video explaining Absolut pressure and Boost pressure. Still seeing the effects of Absolut I think.
I think it's just age and stress. He's probably older than you think.
Super! But dump the music please.
But that's only with a rising rate regulator right? A standard adjustable doesnt do that
dposer10 A standard adjustable will just set a single pressure. A rising rate one will too if you just leave the vacuum/boost line off it.
First
molemolemoley
rob nich have u got that out of your system
Not all fuel pressure regulators have a reference port, mate.
All EFI regulators will have a vacuum/boost reference port. Carburetor regulators don't need one unless it's a blow through setup.
Right.
I guess I'm nitpicking.
Cheers.