Modify Curtis Controller-My Settings-MAKE THE CART GO FASTER!
HTML-код
- Опубликовано: 18 ноя 2024
- FOR EDUCATIONAL USE ONLY
I've been tinkering around with some different settings for the Curtis controller on my Bintelli Beyond 4pr. I'm still trying to figure out what some of the settings do. BUT! I have figured out how to do some of the main things I set out to do. I wanted to be able to change the feel of the accelerator pedal, make the cart able to go faster than 25mph, and be able to program the cart myself when (not if) I get lithium batteries* for the cart.
I'm using the Curtis software 1314-4401, that came with the below linked PC Programming Station.
There are TONS of settings that probably should not be messed with. I am not a good role model to follow. Tinker at your own peril.
---------------------Links to products used------------------
Curtis PC Programming Station with 1309 USB Interface Box 1314-4401: amzn.to/3Nx5iSy
Thanks for posting this content. Keep up the great videos
You bet! I'll keep posting more as I figure out what each of those settings do.
Great video! I wish I had one of those controllers so I could follow along, but I have an EJIA in my EV Titan. I'm curious if you know if these are OEM'd from someone like Curtis so I can program it like you did yours or if I am SoL :)
Once you know what brand and model controller you have, you may be able to figure out the programmer for it by researching online. If you haven't already, you may want to look at buggiesgonewild.com. There may also be a Facebook group for your cart. I have found online communities to be a wealth of knowledge. Although that knowledge may be a bit lacking if your cart is not one of the big three manufacturers. Good luck!
Great info. Fast mode allows me to change settings but fast mode Express does not. Did you have same issue? How do I modify parameters for fast mode Express
I didn't mess with fast mode express much, mostly because it didn't seem to do anything. So, I left it at the defaults and used fast mode (for me) and torque mode (for less experienced drivers).
Sir how can i apply position hold mode so that if my vehicle is is on mountain and i leave the accelerator so my cart should not move.. so by which parameter i can solve it
Sadly it doesn't work that way. That's what the parking brake is for.
how about the software and usb adapter, please tell me how can i buy this? Thankss
Yep, there's a link in the description for the one I got. There may be other ones on Amazon or other websites also.
Where are you located? I wish someone was local to me in VA who could help me with these things.
I'm in SC, near Charleston. I don't get north of SC often, especially in the winter ❄️.
Have you made any recent changes ? I'm going to buy this connector soon so I can increase my speed. I don't need to go much faster than 25 but have a big hill I need to tackle on my daily route and I'd like a little extra push
Can anyone point me to the CURTIS program for the 1243-4209 motor controller?
Or
the electrical/electronic diagram of these controllers?
I would love to see the screen if possible
I've been messing with settings occasionally the past few months. I'll try to get an update vid out.
Awesome information man. Please bump up the audio though for the deaf people like myself.
Let me see if I can do that without pulling the vid.... But, I'll X2 the audio for future vids. THANKS!
I have 2016 EZGO RXV Freedom Limited and just installed an EcoBattery 51V 105ah. For adjusting the Curtis controller, is it best to utilize a handheld programmer or the PC model you demonstrated?
Currently, my cart takes off quick and jerks to stop increasing speed at 19.5mph
I like the PC programmer better, just a personal preference. They both should do the same thing though. Just make sure it's not a limited programmer. You will want one that has OEM or Dealer level access. Good luck!
Hello, can you get me the program to download on my PC, I'm trying and I can't download it, I can't find the program, thank you
I got a copy on a CD when I ordered the programmer off of amazon. Contact the seller if you didn't get a copy and the software was part of the package. There's some now shipping with a usb drive with the software. If you got a cable only from someone who makes cables, they probably can't send you the software without the police showing up at their door eventually... so you may need a more pirate mind to get the software. I opted not to do this, as I value my computers health, and I don't want to invite undesirables to hijack my digital life. But if you are looking for the risk, there are online forums you can join, and download the software for free. Or, just click the link in the description and buy a cable and software from amazon. Good luck!
I have a TXT, parameters have way less options. Basically profile selections, speed, accel selection and braking. Need to figure out how to get into dealer mode to turn enable Freedom. There are hundreds of pages in forums but I have yet to find a solution other than brining it to a dealer. There has to be a back door.
Agreed, gotta be a way. If a dealer can do it, someone else has found a way to do it on their own. Good luck!
Nice vid but my parameters are named totally different than yours. 1206ac-5201 controller and 1314 sw V 4.3.3
That can be an issue with there being so many different controllers and versions of the same controllers. They all look a bit different on the programming side. Hopefully you are able to use some of the info to help you make the adjustments you are looking for.
Where can I get hold of the software 1314?
Everyone needs to realize this software will not allow you to change all parameters on your cart. Some features are locked even in OEM mode. Every cart is different. Curtis uses a proprietary software called Integrated Toolkit that is impossible to get. Only very large OEMs can get it. The only other option is to flash the memory with a firmware upgrade, again impossible to get.
Thanks for that added info. I've been able to make the changes to the settings as desired. I'm sure the manufacturer has access to some impressive other tools for their uses.
Is the Curtis 1314-4401 software compatible with my Curtis 1244-5451 Controller ?? Also what cable did you use ?? Do you know if this software will load on a Mac ??
The good news is, yes I did find that controller is supported by this programmer. The bad news is, the software only runs on Windows. I bought the programmer listed down in the description of the video. If you select the right one, you'll see my channel's name review on Amazon. Not my best review work, but at least you'll know you have the right one.
Is the software available to download anywhere in the internet?