✅ IKEA Lack shelf no drilling no nails on wall
HTML-код
- Опубликовано: 31 июл 2017
- Command Picture & Frame Hanging Strips
amzn.to/2uMvoZG
IKEA LACK
www.ikea.com/us/en/catalog/pro...
2018 Update video:
• IKEA Lack shelf no dri...
In this video, I'll show you how I put up some shelves without drilling or nails into walls or studs. By using 3m Command picture frame strips, you can remove the shelf without damaging the wall. The shelf attaches via the command velcro-like strips and can easily be detached for re-positioning. The strips can then be removed from the wall without leaving any holes.
I use this method to put action figures and other small items. Heavy items are not recommended. I estimate it can probably hold up to 5lbs of stuff.
Mechanical clock with 3M mounts
• Mechanical Gear Wall C...
Music:
Life of Riley by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/ - Хобби
This is awesome!! TY!
Another tip: 3M says that the strips are designed to be vertical and they are MUCH STRONGER that way. They suggest cutting off the tops of long strips to use them vertically instead of rotating them 90 degrees.
Can you link to where they say this?
Wait why? Genuinely wondering
Then 1.00 am “Bang” wake me up lol😂
a glass frame shattered over me in my sleep
wkwkwk
I can't wake up..
@@tbooks2483 if u r depressed go get help, instead of begging for sympathy
Dior Quartier. Holy cow loll 🤭💔
I honestly can't tell if we're on the same page bc that was a cryptic Evanescence joke, but..
1 pt Dior: I do have depression (owned)
1 pt Me: I have a therapist, coping skills, and a good attitude
The way he tells us to not put the shelf not on a single wall but in a corner, kinda sounds like he learned this the hard way...
+Daniel Russell lol you caught me. ;)
I have then in both ways in another and just one side. If u do it right, you at good to go.
U
😂😂😂
damn I was about to ignore all that.
I’ve used these strips for a very heart picture and it’s been successful for over 2 years. You have to purchase by weight suggestions. They have the as much as 70lbs in weight and think even heavier
In IKEA right
@@toxicteezy8310 walmart
what do you call it? the strips
I am so happy I came across this video!
I live in an apartment on rent, so basically I can't really do anything to the walls.
This has helped me a lot.
THANK YOU SO MUCH! ABSOLUTELY LOVED IT!
Just get a matched quart of paint at Home Depot and a small container of joint compound. When your ready to leave the apartment repair it yourself. If you have hardwood floors, these could potentially fall off and damage the flooring, and that is a much harder and more expensive fix. Plus you will have extra paint around if you need to touch things up for peace of mind.
From where I'll get these item?
zafar iqbal Hardware stores , I don’t know which country you live in but in England it’s places like B&Q , screwfix etc
Same here.
I've never thought to nail the strips. Very good idea!
Before you do this hack, do a proper assessment of the surface you are mounting the strips to. The strips are rated to hold a certain amount of weight adhered to a solid surface, but you're most likely mounting this on painted drywall. The wall surface may rip off well before the mounting strips. If you are renting, definitely make sure to take these down before someone else moves in. The next person will not necessarily know how you mounted these to the wall and they may assume its stronger than it is.
All my velcro adhesives fall off the wall after a month or two lol. No matter how light the item is too. I have one 9kg hook holding a novelty hat that weighs less than 500g and it’s fallen off multiple times. Dont use these on painted drywall, it just doesnt work
@@csk2248 THE TRUTH THEY ARE NOT READY FOR! seriously, velcro strips suck ass...
Glad I found this video. I was thinking of using these command strips for some floating shelves but didn't realise they need to be put in a corner. Very useful video, thanks for uploading!
Deborah M
I used them command strips to put up a bamboo magnetic knife rack above my cooker on tiles two years later it's still up and looking good.
OMG, thanks for this! I am getting into collecting a few Funko Pops, and I wanted to put a few on shelves like this but didn't want to damage my apt walls while doing so. I did a Google search, and found this video, and this is so useful. Thanks for sharing!
Check out my updated video too, I have a couple of Pops in it. ruclips.net/video/Tr05Y1-GptA/видео.html
Price & availability details..plz
I literally just bought these shelves to put funkos on. Came to this video while trying to mount them
Adhesives? Dam ballsy. Good for you.
Thank you! Nice job, glad you clarified best usage. Merci.
I used command strips to hold up a Dyson stick vacuum as well ... its good for very light weight items only ...
They really work guys! I have been using them for years!
MommyOf Three take it they are only very light weight tho, jus the odd ornamental
MommyOf Three do you want to be mommy of four
I used 3M dual lock for hangers on the wall where I put my drones. They seems to hold well, but one of them failed already so I wouldn't rely on it. The shelves can be used only for light stuff, one calculus book would break it.
Jr Gonzales ha ha ha hilarious!!!!!
This item not work in India 😂🤣
These shelves look very elegant.
Perfect just what I was looking for
IKEA Products always A CLASS BEYOND COMPARE. I was in Sydney.
Genius! I’m happy I came across your video 😊
Excellent for my rented place! Thank you so much! ..... UK
🙋♀️ this is EXACTLY what I'm looking for. Thank you SOO much. God Bless
Those strips can fail. Depending on the room temperature change.
😲
Good video, thanks for this!
Great video! Perfect for my Pop! figures! Thanks 👍
Emma Hallows how has it held up after a year?? Looking to do it as well with my pop figures!
SO CLEVER. Thank you for sharing this idea. :-)
I wish I knew about these strips before I tried to put up my corner shelf up with nails and screws. What a nightmare! Came very close to throwing my hammer through the wall.
That's an excellent idea! Thanks a lot :D
You are my legend
Thanks for your great idea ♥️♥️♥️
Keep going
Nice production
Bro Thank You so much love thath kinda like a life hack i subed and liked :)
That's very helpful, thanks
love it!
Amazing item
Great for my feather collection.
amazing video,like your idea
This shelf holding is better than my relationship
Woah
Cheer up buddy👍
Stay blesd
Brilliant! Thanks man!
No one ever mentions how expensive these strips are.
because its the wrong thing to use regardless, the entire point of the strip is its removability, which requires you to stretch it using the tab like chewing gum so it loses its grip, so the tabs have to stick out, and the strips can't be nailed.
When his shelf fails its going to pancake world trade tower style, its just a bad idea.
Plus the adhesive strip rating is for weight pulling straight down from a hook, the levering force of a shelf reduces the hold rating to nothing. Any double sided tape strong enough to make this work would cause more damage to your wall than a screw would.
francis chow no the velcro wirk different
francis chow all you need to do is pull them off...then you can see the strips.
He mentioned it is 7$
Ramu Bommisetty shelves are $7
Great idea! Thanks!!
Would the adhesive hold up in bathroom moisture? Would love to do this in my small restroom.
Thats really cool can you use it with textured walls?
This is awesome! I'm going try this. I need them for my Walking Dead collection and photos! 🙂
Nothing glass or heavy he said
Great idea for renters/apartment dwellers
Good to know. Thank you.
Must try this... I was always thinking how to do this without drilling
you can used also liquid nail
Nice idea
A couple of warnings:
1) I ordered the shelves from the link and they look exactly the same, EXCEPT that the side meant for mounting does not have the area in the middle that would be flush with the wall as in the video. I.e., the entire side is recessed and there's nowhere to put the command strips that would be flush with the wall. I guess they changed the design. So the easiest options are to use hardware or expose the ugly mounting side to the world.
2) Make sure your corner is 90 degrees. If both sides can't be flush with the walls then you're going to have a bad time. Many apartments and buildings have walls that are not quite at 90 degrees.
I realized this too. If you have a 3d printer you can design a corner piece to fix both the problems by re-adding the removed middle portion of the shelf then adding a bit of chamfer so if your walls are not perfectly at 90 degrees you can add a few degrees.
!!!!! I learned this the hard way
@@alexperry9276 LOL. Sure, my 3d printer is next to my screwdriver! If not, I'll borrow one from my neighbour. -_-
@@Tashyp LOL
Good work
Hello
Where did you get the middle wood on (1:47)? When I bought the shelf from ikea the middle part is missing I don’t know if it’s separate
Very good
Awesome idea! I'm so going to use this idea!
Danyelle Milton do not try keep some costly breakable things on it..else u might feel 😱😭
Anand Kumar thanks for the tip! I want to put towels on them so it think it should work
Danyelle Milton definitely will honey
Very nice video sir
This seems like a nice idea and never thought of it. Just moved into an apartment and there is no holes that can be put in the wall so no nails. Back in 2015 I went to Japan but ended up getting a good amount of figurines when I went to the arcade when it started raining when I had no coat or umbrella. Now that I have my own place I have been thinking about displaying them just for the hell of it. This may work for my project as the figures are not that heavy and there is only 4 small ones and 3 normal size ones.
Definitely give it a try. Ideally, just use nails if you're allowed to. I don't like to drill or nail things on walls so the 3M command stuff works for me. But I don't put heavy things. Check out my 1 year update video showing it's still up.
would like to use nails but not allowed to put holes in my walls and ya I saw the 1 year video and in that video is way more weight then what I will be putting on it.
I just talked to my landlord and I guess I am allowed to use small nails but nothing as big as a screw and such. Don't know if it would be ideal but might go that way now but will give it a look into now. But thanks for the alternate idea just incase my current one fails.
Great idea 👌🏾👌🏾👌🏾
It's a useful tips im gonna try it...😃
+K.s. Veeraiyan yes try. Mine are still holding strong on the wall since I put them up.
I use small plastic cupboard and put it on floor. No dust, safe and simply to reach.
Awesome 😇
Nice Repsol 😍
For me it's hard to order from Amazon without a credit card so I hope that stuff can be found here in Holland too or just some online store that does accept PayPal. I really like this idea.
Very nice and I hope you are doing well and wish you all the best.
Thank you.
Good idea
plan to use this method for my VR sensors, would it be able to hold them?
Clever!
Great idea
Nice ideas
well done 👏
i have been using these shelves for last 30 yrs. awesome. only change i did is properly nailed it 😂👓
I love it ,it really does wanders 😘
wow thanks
awesome
Hi
LOVE THIS TUTE!!! 😁 2:38
Nice...I wonder if they are in the UK IKEA must look excellent.
Thanks for the idea, you're the best
Gameboy ☺ i miss mine.
Damn thats dope but how long will it last
When the wood shelves LACK suspension by having life screwed them in 😂 he he he
Would these be able to support a NES, PS2 Slim, and a Nintendo Wii? Each on their own shelf
FYI the shelves have been redesigned, they now have a full recess on that back no place to mount strips
Adam Hatfield yup. I was wondering why it said ‘new’ on the site. Went for pickup and got home and realized they don’t have the little block that makes it flush with the wall.
😥
so it wont take the paint off the wall when you go to take it off ?
Are you sure they could hold? I don't think they can be used for books
Awesome idea nice 👍🏽
Hi, can I use it on marble tiles?
It’s good for putting feathers on
WOW 😳 good 👍
I wonder if those would work for me?! I have these terrible and cheap popcorn walls in my apartment. It's so hard getting anything on them.
They could work but like I mentioned in the video its not designed to hold a lot of weight. Mine are still up after almost year.
Where you get that motorcycle toy loooks cool
Terrific job! Will you be doing more videos on this topic soon?
+Best Access Doors hi I'm trying to do more home diy videos too.
Strong enough to hold plants?
If it's pulled out, did the adhesive leave the stain on the wall?
+MyMagic LouLou the 3m strips dont leave a residue
nice product
Thanks for the video! ^^
+Ivan S your welcome!
Super saras
can u do it without a corner if ur adding one thing on it?
I need this
does the adhesive peel paint?
How much it will cost out side USA?
Or do what most people do and just screw in the shelves anyway. It's just as easy to patch a hole as it is to hang the shelves in the first place.
i watched you video and went out to get the supplies. i've just looked at my lack shleves and they dont have a piece of wood in the middle like yours did so there isnt a way to attach the command strips to the non smooth side. any suggestions?
Ikea changed their design. But I did notice the white shelves in my Ikea had the piece but the black and colored ones didn't.
You may need to add a little piece of wood as a filler.
Or put the smooth sides to the wall exposing the "ugly" side. You can cover it with some wall paper.
kenVersus e
The shelves don’t have that block of wood in the middle of them anymore.
Good looking out! They don’t, I don’t think this method can work anymore 😩😩😩
@@danavaughn6918 **2 years ago**
Uhmm hi did u ordered it online I wanted to ordered online but in ig I.hope u see this comment and sorry for having a bad grammar ;)
Clean wall, wait an hour after putting stripes on the wall, then put shelves on.
I used the command strip and it put a hole in the paint on the wall when I removed it, I returned it for refund back to hammer and nail to hang stuff up