Dang you were lucky when you worked on the passenger side headlight. I just did mine two days ago and swapped in some AKKON ones. My metal bracket with the two bolts behind the windshield fluid reservoir had this bulge pointing down which blocked the two bolts where I can't fit any sockets. Had to use a small 10mm wrench and loosen it by 3 degrees at a time until I can barely loosen it with my fingers lol. Decided to not put the metal bracket in. Also if some of you reading this have your front bumper not clipping on if you removed your headlights and etc, if you made any changes with the metal bracket under the headlight with the metal clips and where the plastic clips screw onto the side of the metal bracket, you have to loosen the bolts of the metal bracket to their original position before you messed with the headlights or brackets. What I did was loosen the bolts of the metal bracket with the clips and pulled it out towards the front and side of the car so the bumper can clip on the metal brackets. Because before when I tighten the metal bracket, it was pushed in a bit too much and the clips from the bumper couldn't reach. If you are not replacing your headlight assembly, remove the headlight with the metal bracket still on. If you replace the headlight that came with no bracket, this should help you if you have issues.
Just due a tune up and do a valve adjustment. Replace the valve cover gasket along with the plugs seals. Ngk spark plug 6994 is pregap to.44 .running lean is probably your Air/fuel Ratio sensor
I was able to turn my wheels to remove the plastic wheel well and able to get to the main bulb on the headlight without having to remove the entire bumper.
W big brother. I’m the big brother in my family and I wish I had you as my older brother to help me with my TL 😭😂 you basically have tho anyways with all your videos. I just follow step by step what you did. Mines only the 3.2 base model but almost everything is the same in terms of fixing them
You caught bank 4 in time before the spark plug ejected itself i had the same problem and i had to get a temporary fix on the threads for where the spark plug screws into until i get a chance to replace the cylinder head
Literally W Big Brother Foreal! Hahaha glad to see the TL getting its maintenance taking care of, little bro definitely got to be on top of it! Hope ya are doing well 👍🏾👍🏾‼️
On the headlights is that the hint of blue with white or is that 8k blues definitely ordering set just not sure which ones i want some blue in them maybe just go with all white with hint of blue nice lights tho. You're content is awesome thank you 😊
Have you ever had issues with your clutch pedal? Mines been sticking but no leaks and I can pull it back up and keep shifting fine. Was thinking it’s a clutch return spring above the pedal
Idk my tl has a sound that just sounds clogged it’s underpowered,sometimes il hear a rattle but only in gear ….literally happened of nowhere even stalls at times
Yes fr lol I’ve seen ppl do it through the fender wells but that’s only if you have AF intake on driver, either way I can’t fit in there to work without risk of breaking the light.
Damn we almost lost bro not even 5 minutes in the video 😂😂 but aye good shit!🤝🏼
twass a close one!!
Dang you were lucky when you worked on the passenger side headlight. I just did mine two days ago and swapped in some AKKON ones. My metal bracket with the two bolts behind the windshield fluid reservoir had this bulge pointing down which blocked the two bolts where I can't fit any sockets. Had to use a small 10mm wrench and loosen it by 3 degrees at a time until I can barely loosen it with my fingers lol. Decided to not put the metal bracket in. Also if some of you reading this have your front bumper not clipping on if you removed your headlights and etc, if you made any changes with the metal bracket under the headlight with the metal clips and where the plastic clips screw onto the side of the metal bracket, you have to loosen the bolts of the metal bracket to their original position before you messed with the headlights or brackets. What I did was loosen the bolts of the metal bracket with the clips and pulled it out towards the front and side of the car so the bumper can clip on the metal brackets. Because before when I tighten the metal bracket, it was pushed in a bit too much and the clips from the bumper couldn't reach. If you are not replacing your headlight assembly, remove the headlight with the metal bracket still on. If you replace the headlight that came with no bracket, this should help you if you have issues.
Just due a tune up and do a valve adjustment. Replace the valve cover gasket along with the plugs seals. Ngk spark plug 6994 is pregap to.44 .running lean is probably your Air/fuel Ratio sensor
I finally got a type s 🎉
I was able to turn my wheels to remove the plastic wheel well and able to get to the main bulb on the headlight without having to remove the entire bumper.
W big brother. I’m the big brother in my family and I wish I had you as my older brother to help me with my TL 😭😂 you basically have tho anyways with all your videos. I just follow step by step what you did. Mines only the 3.2 base model but almost everything is the same in terms of fixing them
You caught bank 4 in time before the spark plug ejected itself i had the same problem and i had to get a temporary fix on the threads for where the spark plug screws into until i get a chance to replace the cylinder head
Literally W Big Brother Foreal! Hahaha glad to see the TL getting its maintenance taking care of, little bro definitely got to be on top of it! Hope ya are doing well 👍🏾👍🏾‼️
yup yup!! hopefully we can keep her in check
Yeah I need to do better, I just give him money he tells me what to do
I had the same problem with my tl but I change the spark plug and the fuel injector and everything is working well
Always have Spotter
Big bro FTW !!
What about the Bank 1 P0171
The tl headlights have fuses for low beam and high beam
On the headlights is that the hint of blue with white or is that 8k blues definitely ordering set just not sure which ones i want some blue in them maybe just go with all white with hint of blue nice lights tho. You're content is awesome thank you 😊
Have you ever had issues with your clutch pedal? Mines been sticking but no leaks and I can pull it back up and keep shifting fine. Was thinking it’s a clutch return spring above the pedal
The igniter is the issue for the light not turning on 😊
I have those 2 exact lean codes. Did yours go away? Weird thing is my check engine light for those codes come on and off randomly.
lol, the hood struts are on upside down. The hood should slow down as it reaches the top.
Yo shoutout to big bro, always got my back💯
Rear main seal leak
Please don't use felpro gasket. It will start leaking again under 30k miles
"W" for the Big Bro!!!
What a good brother
Fr
Bro my brother got my other brother another type s so now im in possession of 2 type s now, it really do be like that huh
Thought to get oem coil packs but they're crazy expensive. Which do you recommend?
I recommend the ones I got
P2R racing
Do you have a type s rear lip for sale and will ship?
My tl doing the same thing
LMFAOOO DAM BRO THE STRUGGLE WAS REAL !
the waffle bench press was some of the dumbest shit I've seen keep it up bro
W big brother forsure !
Idk my tl has a sound that just sounds clogged it’s underpowered,sometimes il hear a rattle but only in gear ….literally happened of nowhere even stalls at times
Any update I have same problem
Nice Job!
You need to clear the codes
W 🔥🔥
nice vid. tl gang
You got to be kidding right ? You have to take that much just to replace a headlight bulb 😮
Yes fr lol I’ve seen ppl do it through the fender wells but that’s only if you have AF intake on driver, either way I can’t fit in there to work without risk of breaking the light.
🤣🤣🤣🤣🤣🤣🤣🤣
😂😂😂