How to Replace window regulator on Volkswagen Passat B5

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • Humanity runs on coffee.😊 ... www.buymeacoff...
    Today we will show you how to replace window regulator on Volkswagen Passat B5.
    Our video is for informative propose and we can not be made responsible for any damage made during the operation. If you are not sure you can manage this operations please contact a authorised workshop to help you out solving the problem!
    Hit the like button and subscribe for more videos!
    Hope you enjoy!

Комментарии • 12

  • @BuddyMechanics
    @BuddyMechanics  3 года назад +1

    Humanity runs on coffee.😊 ... www.buymeacoffee.com/NinjaGameSquad

  • @thomasschmidt1062
    @thomasschmidt1062 Год назад +1

    Great video, thanks. One passenger side window regulator replaced at minimal expense. Take your time and a little bit of patience. I purchased the kit without the panel (just rails and wires), drilled out the existing rivets and bolted the new one into the current panel, a little bit of patience and not outside basic DIY skills.

    • @LonelyWolfTXR
      @LonelyWolfTXR 4 месяца назад

      what all did you need to do this tool-wise? I'm trying to do this repair the same way on a fairly tight budget. Kinda wish there was a video showing how to do it that way instead of installing a brand new panel

  • @johne6081
    @johne6081 Год назад +1

    1) It helps to have a stash of new plastic door panel clips.
    2) You do not need to remove the door lock and latch mechanisms if you instead just press out the two plastic rivets that hold the latch assembly to the inner panel. The plastic piece that attaches the inner panel to the latch mechanism is unnecessary, probably used in original factory assembly.

  • @TheSifting80
    @TheSifting80 10 месяцев назад

    Thanks for the great tutorial 👌

  • @SciFirstMovieTalk
    @SciFirstMovieTalk 3 года назад +2

    Very handy indeed! :)

  • @Edis1990
    @Edis1990 3 года назад

    At 06:30 when splitting up this part doesn't the cable inside get all loose and messed up? I have to change this part I think because my car doesnt like something after changing the whole door with the window regulator (changed the whole panel with the regulator) + new door because mine were scratched too much. So now I cant control my mirror + windows (except for driver's doors) and whats the worst is that I cant lock the whole driver's side. I can lock it only manually

    • @BuddyMechanics
      @BuddyMechanics  3 года назад

      No, is not getting loose.
      Hard to tell what's happening to your car, without seeing...

  • @ronnytotten9292
    @ronnytotten9292 3 года назад

    How do you bring the window down with the door out of car or vehicle has no power???

    • @BuddyMechanics
      @BuddyMechanics  3 года назад

      I didn't do this ever, but found this over the web... maybe will help you:
      "Can you manually raise a power window?
      Move your palms upward gently and slowly while gripping the glass. Do not allow your palms to slip on the glass. You may have to do this very slowly, but the electric motor gears will turn, and the window will begin to move upward from your actions. Push the window into the seal at the top of the door."

  • @charmslifestyle
    @charmslifestyle 3 года назад

    I'm still here