You just described why Hyundai and Kia with physical keys can be stolen easily in the USA. Thank you for the details. I would have never known that bulky key had no immobilizer for USA.
hello friend, I appreciate your video. but I would like to ask a few things. I have a 2011 Sonata smart key system that has a Smatra immobilizer problem like in the video... and I would like to know if these Kia or Hyundai models have an immobilizer or anti-theft unit. the local programmer can't seem to find it
I have 2008 Sedona EX with immobilizer in the US. Can you upgrade my ECU to disable it? I have have no start issues. My remote start works but the car has a key up under the dash board tied to the remote start. But, my other two keys won't start in the ignition cylinder.
You require MASTER or SLAVE. Flex Master reads/writes unencrypted files. Flex Slave reads/writes encrypted files and require to be connected to a Master to do file modifications.
I have one on my VW CC. I don't know what the hell makes him say that. And not we got a U.S. model kia with the same damn problem. Idk if I can trust this guy anymore. 🤣
Watched your video and it's quite interesting as I have exactly the same problem with my Hyundai Tucson Smartra Module...as per OBD2 fault code P1690. It has been a week and there's no positive result with the Hyundai dealer so I'm desperate to have the Immobilizer disabled. I'm here in the Philippines and I'm wondering if you cater such thing. Thank you for your kind reply.
What's the solution for all the stolen Toronto vehicles of all makes that show up in Africa and the Middle East with Ontario license plates still on them? I had one that is used in some countries, but MSN censored me and don't suppose YT would allow it either.
Having Immobilizer issues on 2015 Hyundai Veloster Turbo. Key unlocks and locks doors but it won't start. It's a push to start. Was told by locksmith it's an ignition button or immobilizer issue. What is the cost to delete??
What happens for those cars that have the push start system? A friend has a hyundai veloster 2013 and it has the same issue where it's says "no response from the smatra unit"!
Hello Sir i have a question about i check my vehicle needs to replace ECU a elantra 2013 what all i need to replace if i change it from a used ECU do i need to replace smatra from the same vehicle ECU is?
Replacing ECU requires either disabling immo or need to replace multiple modules for the vehicle to start. We can update VIN and disable immo for kia Hyundai ECUs.
Unfortunately no. Assuming same problem, Either replace the smartra unit and harness at times. Or disable immo system through advanced tools and expertise. You can reach out to info@vepro.ca for further service details
Genesis also can be done but if it's the push to start system, there is a common electronic steering lock failure and we offer a plug and play no adaptation bypass emulator. Contact info@vepro.ca for further details.
Hi im a master mechanic for 35yrs . Got my gf 2012 kia sorrento 2.4 manual engine this problem is so intermittent. It cranks and no start ive pico scopped cam and crank and fuel pressure and so on everthing is good and so is immobilizer unit. Im 90 % certain its a faulty ecu as i jave pinout all inputs and monitored all pids . When problem happens i loose spark and injector pulse on grounding side not hot main ecu relay so its a driver issue side from ecu. And cam and crank patterns good. Have any of you guys seen faulty ecus on these as i have done so many crank sensors and fuel pumps and ecu relays. My question is do you guys need original ecu or can i send u a uses kne to be vin neutral matched to vehicle i can do imobilizer programing with my scanner but i dont want to buy a j tool for it as they can be expensive. Has anyone been down this road
Common problems with internal misfits and other IC failing. We can either update the VIN in the donour and use other tools to neutralize and program or clone the data from the original ecu to the donour. The latter would be the best cost effective way to resolve this. Please contact info@vepro.ca for further details.
Watched your video and it's quite interesting as I have exactly the same problem with my Hyundai Tucson Smartra Module...as per OBD2 fault code P1690. It has been a week and there's no positive result with the Hyundai dealer so I'm desperate to have the Immobilizer disabled. I'm here in the Philippines and I'm wondering if you cater such thing. Thank you for your kind reply.
You just described why Hyundai and Kia with physical keys can be stolen easily in the USA. Thank you for the details. I would have never known that bulky key had no immobilizer for USA.
From the other side of the world
, opposite of canada,
we have hot weather.
I learned from your video ,Thank you
hello friend, I appreciate your video. but I would like to ask a few things. I have a 2011 Sonata smart key system that has a Smatra immobilizer problem like in the video... and I would like to know if these Kia or Hyundai models have an immobilizer or anti-theft unit. the local programmer can't seem to find it
Thanks a lot 🙏 for so much information
Much support from 🇿🇦 ZAR- Durban Rich Future by DSK Clothing ❤
I have 2008 Sedona EX with immobilizer in the US. Can you upgrade my ECU to disable it? I have have no start issues. My remote start works but the car has a key up under the dash board tied to the remote start. But, my other two keys won't start in the ignition cylinder.
Hi, nice and informative video.
Do we need FLUX MASTER and SLAVE both for programming any module?
You require MASTER or SLAVE. Flex Master reads/writes unencrypted files. Flex Slave reads/writes encrypted files and require to be connected to a Master to do file modifications.
@@VEPROFESSIONALS Thanks for the reply. Actually I need a tool for read and write for all ECU and TCU purpose not for tuning or remapping.
@@VEPROFESSIONALS whether the flux tool will support for Indian vehicles?
@@VEPROFESSIONALS Hi, how do we know it’s a unencrypted files and encrypted files?
So if u.s models don't have immobilizer, why do they have fuse ? Like on my 05 Tucson gls
I have one on my VW CC. I don't know what the hell makes him say that. And not we got a U.S. model kia with the same damn problem. Idk if I can trust this guy anymore. 🤣
Canada made immobilizer mandatory years ago, the US didn't. Your 05 Tucson doesn't have an immobilizer. The burglar alarm is not an immobilizer.
Watched your video and it's quite interesting as I have exactly the same problem with my Hyundai Tucson Smartra Module...as per OBD2 fault code P1690. It has been a week and there's no positive result with the Hyundai dealer so I'm desperate to have the Immobilizer disabled. I'm here in the Philippines and I'm wondering if you cater such thing. Thank you for your kind reply.
You can reach out to info@vepro.ca
sir.good morning, can i just replace that smartra without any programming?
no
How much does this delete cost 2009 accent
What's the solution for all the stolen Toronto vehicles of all makes that show up in Africa and the Middle East with Ontario license plates still on them? I had one that is used in some countries, but MSN censored me and don't suppose YT would allow it either.
Where's the immobilizer located in hyundai ?
Having Immobilizer issues on 2015 Hyundai Veloster Turbo. Key unlocks and locks doors but it won't start. It's a push to start. Was told by locksmith it's an ignition button or immobilizer issue. What is the cost to delete??
Please contact info@vepro.ca and a specialized tech will reach out.
What happens for those cars that have the push start system? A friend has a hyundai veloster 2013 and it has the same issue where it's says "no response from the smatra unit"!
Contact info@vepro.ca for further details.
Well the dealer in mcdoungh ga dont know how to do it or anything to help me.but charged me 275 dollars to tell me they dont know how to fix it.
Hello Sir i have a question about i check my vehicle needs to replace ECU a elantra 2013 what all i need to replace if i change it from a used ECU do i need to replace smatra from the same vehicle ECU is?
Replacing ECU requires either disabling immo or need to replace multiple modules for the vehicle to start. We can update VIN and disable immo for kia Hyundai ECUs.
Currently stuck in a parking lot in 30° weather, any quick fixes for this I can do right now
Unfortunately no. Assuming same problem, Either replace the smartra unit and harness at times. Or disable immo system through advanced tools and expertise. You can reach out to info@vepro.ca for further service details
Hi...I did lost my Getz 2007 remote ...how could start my baby....
😮 what about the USA Genesis?
Genesis also can be done but if it's the push to start system, there is a common electronic steering lock failure and we offer a plug and play no adaptation bypass emulator. Contact info@vepro.ca for further details.
Hi im a master mechanic for 35yrs . Got my gf 2012 kia sorrento 2.4 manual engine this problem is so intermittent. It cranks and no start ive pico scopped cam and crank and fuel pressure and so on everthing is good and so is immobilizer unit. Im 90 % certain its a faulty ecu as i jave pinout all inputs and monitored all pids . When problem happens i loose spark and injector pulse on grounding side not hot main ecu relay so its a driver issue side from ecu. And cam and crank patterns good.
Have any of you guys seen faulty ecus on these as i have done so many crank sensors and fuel pumps and ecu relays.
My question is do you guys need original ecu or can i send u a uses kne to be vin neutral matched to vehicle i can do imobilizer programing with my scanner but i dont want to buy a j tool for it as they can be expensive. Has anyone been down this road
Common problems with internal misfits and other IC failing. We can either update the VIN in the donour and use other tools to neutralize and program or clone the data from the original ecu to the donour. The latter would be the best cost effective way to resolve this. Please contact info@vepro.ca for further details.
How much is flex,how much is subscription per year.
Email info@vepro.ca
Is happen to me but the car start and stop sometime and hard to restart
Where is your shop? I want to bring my car to your shop. I have the same problem.
Contact info@vepro.ca for further details
Hi sir i asking
Have same problem sad😊
Have you gotten the issue fixed I just brought my Kia and already I got these issues
@@shamyataylor338did you figure this out ?
I got a Hyundai Sonata 2005 no spark no fuel power no power going to the fuel pump and no spark plug power
Hi. Im interested in your service.
Email info@vepro.ca for any inquiries or services.
Watched your video and it's quite interesting as I have exactly the same problem with my Hyundai Tucson Smartra Module...as per OBD2 fault code P1690. It has been a week and there's no positive result with the Hyundai dealer so I'm desperate to have the Immobilizer disabled. I'm here in the Philippines and I'm wondering if you cater such thing. Thank you for your kind reply.
How to remove an immobilizer from a vehicle
What’s your mailing address I’ll be sending you the 2 ECM’S tomorrow you should get them by Monday
u1011 lost communication with hca by hcu l-can kia
May you help please
Contact info@vepro.ca for more details
My Hyundai doesn't start. Is this a brain program problem.??