You take rebuilding seriously. No stone unturned. I like that. All work worth doing is worth doing right. No hesitation buying a truck rebuilt by you. Keep up the great work.
I've watched a lot of auto enthusiasts on here but I watch this channel the most. It's not just your skill in building awesome trucks it's your attitude and how you really put all of yourself into the project. Then there the editing. You put together good videos that are watchable and satisfying. I wish you the best of success.
I'm got into toyotas years ago, I have an 85 reg cab. And about 5 years ago I picked up an 88 custom cab. My dad has one too. I just bought an engine to swap into mine and waiting to buy another for my dad'struck. It going to be nice to get them back on the road again. Great video's and content, keep it up!
I love your enthusiasm for these builds. It’s not just content to you so it’s not just content to me either. Blown away with what you can do! I think what you CANNOT do would be a shorter list. Thank you for sharing and creating. Keep it up.
What an amazing transformation! The things I like about what you do are number 1 your knowledge, number 2 your skill, number 3 that you explain everything so well and include links to everything in the description and I’ll bet that the product you end up with is 10 times better than the product from the factory when it was new. Awesome job dude, really enjoy your vids! 😎👌👍
Definitely attention to detail but more importantly you have the patience. Love how in depth you go. I really wish you would 100% restore this truck lol
Congrats on a full teardown. Did the same on my F250. Just remember where everything goes, you're probably taking lots of pictures. When laying a cab on its back, I usually put a couple layers of foam insulation board on the floor just so you don't dent or crease anything you'll have to fix later.
Your channels become one of my favorites. And as someone who's painted professionally for about 10 years now Im impressed. One suggestion though. When spraying (most) single stages, drop the pressure down to 14-16 at the cap. Lays down much better and less overspray that can settle. Also you should try nason urethane single stage. Worlds better than tamco and not that much more expensive
Had the same thought on pressure/overspray. When I was shooting a couple weeks ago, started seeing a ton of overspray and burning through product. Found my pinkie finger had bumped the regulator dial up to 40psi dynamic. Brought it back down below 20 and all was well again. Easy mistake to make, a piece of tape may prevent the dial turning accidentally.
Looking great Austin! This thing will last many years to come now that you've repaired and refinished the floor and sealed it up from the elements! Can't wait to see what you do next to it!
The black is a nice touch I dig it. Sound deadening will help alot with heat and noise, and in general making the cab a nicer place to sit. The lack of structure Toyota provided back then made those little trucks totally suck on a long ride, I had a 78 that was atrocious.
I like the fact that your videos show that even total disassembly of a vehicle is possible if you do it in stages. Label everything, take pictures ,etc. and it can be done.
Looks amazing and cant wait for the finished product! I have been waiting on the guy I'm working with to finish my 1987 Toyota pickup but I think I'm way more excited to see how yours comes out! Keep up the great work and looking forward to the next episode!
Man this looks good! Good to see someone putting some wrench time in to one of these, most of those generation Toyota’s up here in NW Washington are destroyed
الحقيقة التي يجب قولها هي أنك لست شخص عادي أنت تستحق لقب مبدع وفنان بدون استثناء . ما قمت به من تغيير انظمة حمل الشاسيه وتغيير نظامها القديم بنظام قمت بتصميمه يعتبر إبداع لا يمكن أن يقوم به فني ميكانيكا فحسب بالإضافة إلى فك قمرة القيادة وإصلاح التلف الذي لحق بها وإزالة الصدأ ومعالجته ثم قمت بطلاء القمرة من الخارج والداخل ثم تأسيس اللون الحقيقة أن عملك جبار بكل المقاييس وانا بعد أن شاهدت الفيديوهات الخاصة بالهايلكس موديل ١٩٧٧م بدون تردد قمت بالاشتراك في القناة وأتمنى لك النجاح والتوفيق في مجال تجديد السيارات الكلاسيكية ... تقبل تحياتي من المملكة العربية السعودية ... ابو حمود ...
Nobody can say that you do a half ass job that's for sure. I'm more of a 3.4 Taco fan but it's still cool watching you bring your projects from an idea to reality. Nice work man.
Watch your videos every week. Can’t wait for this new build, you’ve got some serious skills and the attention to detail is great to see. Keep up the good work my man!
You are killing my OCD making the majority of the truck remarkable and leaving the exterior in shambles. I know I know it’s your project but dang man you do good work.
Looking good 👍.. curious to see how you are going to contrast all that black. So it's going to be interesting and I am looking forward to seeing the next post.
Great work always a pleasure to watch I’m in the UK and work in auto body we don’t have the luxury of outside temperatures being so warm I’m currently building my own project I’m going to do a version of your flatbed project you did. Keep it up looks awesome
Austin this truck is going to be amazing!! finally getting the treatment it deserves can't wait till it's finished. this mini truck will be show worthy when you are done for sure.🤯🤯 You should definitely think about a wood plank bed for the truck something dark would look so sick, especially if you are still thinking about keeping the patina on the outside.
On the one hand I think the patina is wonderful, my other hand is itching to paint that exterior! Also, I'll second that adding sound deadening to these old trucks is a must. Lastly, I would love if you lowered the music and raised the sound of the scraping, sanding, spraying, etc. Oh yeah, I watch all of your videos!
Nice working on cleaning it up. Smart thinking on spraying the inside of the cab between the metal layers. The black and white combo with the frame details is gonna look slick once all together.
Austin, I must to congratulate you again. The level of detailing is incredible and I wish you won thousands of followers on your channel because you deserve it buddy. Greetings from South America.
Looks great man. You should invest in one of those external sand blasters from harbor freight. You could do it outside the shop and make quick work of stuff like this
Every video of yours I watch makes me want to get off my ass and fix up my 91 love that body style soon as my health gets better I really wanna redo it put a ls400 in it make it my daily drive. Dreams thank you for keeping my hopes up best of luck on all your builds.
I personally would have used same color as the paint code. I love that antique Toyota white. Almost looks like a pearl. I think the interior of the cab is to small to be a dark color. Your work is amazing. Im sure it's going to look great whatever you decide to do with it though. 😎👍
If you ever need to get the interior body deadener off again get some dry ice and it will break off in sheets also the residue glue comes off with Turpentine.
Always love the skills you have brother. Attention to detail is amazing.. Get this man more subs and sponsors!
Thanks man! Let’s gooo!!
For sure definitely takes a special habd to do what he does
@@austinniemela Hey, are you sending us comments with another account about free stuff, or is that somebody impersonating you?
That nylon brush wheel is the snizzle, love it!
You take rebuilding seriously. No stone unturned. I like that. All work worth doing is worth doing right. No hesitation buying a truck rebuilt by you. Keep up the great work.
I've watched a lot of auto enthusiasts on here but I watch this channel the most. It's not just your skill in building awesome trucks it's your attitude and how you really put all of yourself into the project. Then there the editing. You put together good videos that are watchable and satisfying. I wish you the best of success.
I'm got into toyotas years ago, I have an 85 reg cab. And about 5 years ago I picked up an 88 custom cab. My dad has one too. I just bought an engine to swap into mine and waiting to buy another for my dad'struck. It going to be nice to get them back on the road again. Great video's and content, keep it up!
Austin your channel has become one of my favorite auto body shops. I really enjoy seein the stuff you do all by yourself 👍. Keep up the great work
I love your enthusiasm for these builds. It’s not just content to you so it’s not just content to me either. Blown away with what you can do! I think what you CANNOT do would be a shorter list. Thank you for sharing and creating. Keep it up.
Awesome, thank you!
Since teenage i loved Toyotas pickup and now i find tour grenat skill, good job m'en , good continuation
What an amazing transformation! The things I like about what you do are number 1 your knowledge, number 2 your skill, number 3 that you explain everything so well and include links to everything in the description and I’ll bet that the product you end up with is 10 times better than the product from the factory when it was new. Awesome job dude, really enjoy your vids! 😎👌👍
I just found this channel a few weeks ago and I'm hooked. This is going to be a gorgeous brand new truck when you're finished. Great work!
Definitely attention to detail but more importantly you have the patience. Love how in depth you go. I really wish you would 100% restore this truck lol
Like how you had the por15 lid screwed on. Great idea. No mess, no waste.
Austin this truck is going to be so cool " even if its not 4wheeldrive " I love it!
Congrats on a full teardown. Did the same on my F250. Just remember where everything goes, you're probably taking lots of pictures. When laying a cab on its back, I usually put a couple layers of foam insulation board on the floor just so you don't dent or crease anything you'll have to fix later.
Austin, the truck is going to look fantastic, great job as always...
Paint looking good Austin, Love Toyotas
I got a 2017 Tacoma and i love watching all the truck rebuilds you do 👍🏼. Much Love from Georgia
Your channels become one of my favorites. And as someone who's painted professionally for about 10 years now Im impressed. One suggestion though. When spraying (most) single stages, drop the pressure down to 14-16 at the cap. Lays down much better and less overspray that can settle. Also you should try nason urethane single stage. Worlds better than tamco and not that much more expensive
Thanks!! This was sherwin paint, I’m going back to Omni! I’ve never had a single issue with Omni!
Had the same thought on pressure/overspray. When I was shooting a couple weeks ago, started seeing a ton of overspray and burning through product. Found my pinkie finger had bumped the regulator dial up to 40psi dynamic. Brought it back down below 20 and all was well again. Easy mistake to make, a piece of tape may prevent the dial turning accidentally.
@@branchandfoundry560 keep in mind the sun was beamin which makes the over spray appear to be much worse than in reality!
@@austinniemela ...or the sun tells just how much overspray there really was ;-) Great work as always, Austin!
The Panda Hilux, coming along nicely! 👌🏻
Looking great Austin! This thing will last many years to come now that you've repaired and refinished the floor and sealed it up from the elements! Can't wait to see what you do next to it!
Looking forward to seeing the finale .
Liking the contrast. Can't wait to see how the interior comes out.
The black is a nice touch I dig it. Sound deadening will help alot with heat and noise, and in general making the cab a nicer place to sit. The lack of structure Toyota provided back then made those little trucks totally suck on a long ride, I had a 78 that was atrocious.
I like the fact that your videos show that even total disassembly of a vehicle is possible if you do it in stages. Label everything, take pictures ,etc. and it can be done.
Looks amazing and cant wait for the finished product! I have been waiting on the guy I'm working with to finish my 1987 Toyota pickup but I think I'm way more excited to see how yours comes out! Keep up the great work and looking forward to the next episode!
Looking amazing dude. Attention to detail does not go unnoticed. Great work
Excellent project. I have two Toyotas, one a 76 short box and the other a 78 long box. I learn a lot from your videos. Blessings, brother.
Man this looks good! Good to see someone putting some wrench time in to one of these, most of those generation Toyota’s up here in NW Washington are destroyed
Ahh this build is so thorough and well done on doing it right 👏
الحقيقة التي يجب قولها هي أنك لست شخص عادي
أنت تستحق لقب مبدع وفنان بدون استثناء .
ما قمت به من تغيير انظمة حمل الشاسيه وتغيير نظامها القديم بنظام قمت بتصميمه يعتبر إبداع لا يمكن أن يقوم به فني ميكانيكا فحسب بالإضافة إلى فك قمرة القيادة وإصلاح التلف الذي لحق بها وإزالة الصدأ ومعالجته ثم قمت بطلاء القمرة من الخارج والداخل
ثم تأسيس اللون الحقيقة أن عملك جبار بكل المقاييس
وانا بعد أن شاهدت الفيديوهات الخاصة بالهايلكس موديل ١٩٧٧م بدون تردد قمت بالاشتراك في القناة
وأتمنى لك النجاح والتوفيق في مجال تجديد السيارات
الكلاسيكية ...
تقبل تحياتي من المملكة العربية السعودية ...
ابو حمود ...
Nobody can say that you do a half ass job that's for sure. I'm more of a 3.4 Taco fan but it's still cool watching you bring your projects from an idea to reality. Nice work man.
Watch your videos every week. Can’t wait for this new build, you’ve got some serious skills and the attention to detail is great to see. Keep up the good work my man!
Learning heaps man, thanks. I had a wet carpet to remove and your vids sure give me a point of reference.
Doing a great job there 👍 great your saving the old girl there getting rare to find 😀
Awesome work brother 👏
Looking good. Should powder coat some small stuff like nobs shifter etc in the cab of that red powder coat you used on the coils to tie it all in
Your videos are always so satisfying to watch man
You are killing my OCD making the majority of the truck remarkable and leaving the exterior in shambles. I know I know it’s your project but dang man you do good work.
One word for you man: AMAZING!!
Pretty good,, can't wait to see the final, will be amazing
you see what i have never seen in cars and trucks looks great
This hilux is looking really good bro can’t wait for more vids
Like where this is going!… I envy your follow through/tenacity. Great watching you, it inspires me. Thanks brother. Keep ‘‘em coming!
Looks good. Can’t wait to see the rest!
Always a great job! Waiting to see more.
Nice job bro can’t wait to this interior done
Va genial. Ya quiero verlo terminado 😂😂😂
Always a blast to watch. Great job. 👍
Can't wait for the end looking good
I’m loving this build.
Increible reconstrucción eres exelente Austin como debe ser excelente vídeo y mejor trabajo
Looking good 👍.. curious to see how you are going to contrast all that black. So it's going to be interesting and I am looking forward to seeing the next post.
The Paint Amazing Broo 😍🖤
Wow awesome.. good job 👍
Great work always a pleasure to watch I’m in the UK and work in auto body we don’t have the luxury of outside temperatures being so warm I’m currently building my own project I’m going to do a version of your flatbed project you did. Keep it up looks awesome
Austin this truck is going to be amazing!! finally getting the treatment it deserves can't wait till it's finished. this mini truck will be show worthy when you are done for sure.🤯🤯 You should definitely think about a wood plank bed for the truck something dark would look so sick, especially if you are still thinking about keeping the patina on the outside.
Thanks! The wood is a great idea!!
Austin. Great work. Clean..
That’s going to work great together
Looks good Austin..
Brother, your skills are impeccable...im especially interested in how this truck will turn out..i might use this video as a guide... thumbs up
Thank you!
очень круто получается! молодец ! каждое видео смотрю с удовольствием!
Looks mad loving this one..
I think you should go for a TDI build on this one and go for max MPG ever in a Hilux!!!
On the one hand I think the patina is wonderful, my other hand is itching to paint that exterior! Also, I'll second that adding sound deadening to these old trucks is a must. Lastly, I would love if you lowered the music and raised the sound of the scraping, sanding, spraying, etc.
Oh yeah, I watch all of your videos!
Saludos Amigo, su trabajo es de Admirar
👍🏽🇺🇸👍🏽 color combo looks great
Low key wanna see you make an extreme Toyota bug out vehicle that cannot be hit by emps.
As always man, your work is spectacular 🤘😎
Beautiful work man 🙌
Great episode! Enjoying this series very much 👍🏽
Awesome Austin!
Bruh this was so satisfying to watch. Do it once, do it right 💯
жарайсың еңбекқор жігіт екенсің Алла тағала колыңа дерт бермесін батыс Қазақстан Актобе
Nice job looking killer so far
Nice working on cleaning it up. Smart thinking on spraying the inside of the cab between the metal layers. The black and white combo with the frame details is gonna look slick once all together.
Great job man
Austin, I must to congratulate you again.
The level of detailing is incredible and I wish you won thousands of followers on your channel because you deserve it buddy.
Greetings from South America.
Thank you!!!
Looks great man. You should invest in one of those external sand blasters from harbor freight. You could do it outside the shop and make quick work of stuff like this
Looking great so far! Loving this project! Keep up the good work 🤘🏼
Looking good
Every video of yours I watch makes me want to get off my ass and fix up my 91 love that body style soon as my health gets better I really wanna redo it put a ls400 in it make it my daily drive. Dreams thank you for keeping my hopes up best of luck on all your builds.
Thank you! Get well soon!!
@@austinniemela thank you sir.
Looking great
Looking good!
Fantastic, creative and forward from Jordan
please paint the hole thing!
Looking sick.
Awesome job!!!
Austin’s vehicles are going to out last human civilization
You are a genius
I personally would have used same color as the paint code. I love that antique Toyota white. Almost looks like a pearl. I think the interior of the cab is to small to be a dark color. Your work is amazing. Im sure it's going to look great whatever you decide to do with it though. 😎👍
Did you just send me a telegram invite or is this someone else looking to scam someone ?
You do extremely good paint work wish I could nab you to paint my classic car when it's finally ready for paint lol
Hi budy... You work is soooo good.... 🇯🇴🇯🇴
@INBOX ME ON TELEGRAM👉Austinniemelaok
Now u gotta paint the exterior white lol looking smooth
That’s Toyota love.
That’s all I’ve ever driven
Damn brother. Truck is looking awesome! Would kill to have you rebuild my 86 SR5 Ext Cab.
Great job .
Looking good
Looks good like what you doing
The outside I want you too revive/replace those little hearts on the Pillar please keep them
Good job man. İt would be a nice piece of art
If you ever need to get the interior body deadener off again get some dry ice and it will break off in sheets also the residue glue comes off with Turpentine.
Great Scott!