Hey man, great vid, don’t sweat about the failed test, you put in the effort to upload these videos, it’s very hard to find content on these products, keep up the good work👌
No bios update since December means it still has no support for 8600G/8700G, oudated Agesa etc. Always a problem with chinese they don't keep the software up to date, often there's never any update at all, like mini pcs...
You need to consider that they are just a small firm, which means latency for updating bios. This is the problem of tight budgets, instead of Chinese brands
Must have to know that this motherboard only sells less than 100 bucks. Not mention to b650 itx, you can’t even search better b650 matx ones in such price
Thank you so much for this video. I went to JGINYUE's site and found that there is a new UEFI update file for download. Did you find in the UEFI any option to enable AMD SVM (AMD-V)?
Hello, I have a problem and it is the following, it turns out that I have a pcie 3.0 extender and the motherboard only works with pcie 4.0 and I don't know how to solve it since I bought a b550itx from the same brand a long time ago and they gave me a modified bios with pcie 3.0 and on the b650itx there is no such bios, if I buy the extender it will be a month and I need to use the PC
wait this videos didn't mentions anything about the wifi card, what wifi card manufacturers they use MTK or Intel? or we should bought the wifi card ourself? 😅
a620i lightning supports CPUs up to 170W, it also has 8+2+1 stages 60A each, thats more than enough for 7500f/7600/x/7700/x/7800x3d/7900, PBO grants like 100-150mhz/3% increased performance @@ivantsipr
Hey, i have a Patriot viper venom ddr5 5200 cl40 64gb kit that i can run at 6000 cl36 using manual timing from buildzoid , you know if this mobo can run the same overclocking? Also any word on future bios updates to support 8000/9000 series processors? Thanks for the review
The amount of information released on the website is too small, and I don't know if I will support the next generation of CPUs in the future. In the case of memory overclocking, we have seen a successful case of 6000Mhz CL36 on a community site.
@@DalraeMyo thanks for the info , it's interesting mobo for the price but for now I will only watch if they support future gen , looking to move to itx but other options are quite expensive
Try manually adjusting the memory voltage. I looked up community reviews and saw reviews that successfully applied EXPO by manually adjusting the memory voltage.
CPU voltage was only supported by entering manual (direct numerical) (offset mode was not supported) Fortunately, for AMD CPUs, the undervolting feature can be replaced by Curve Optimizer.
@@TurboD16z6 probably cheap or badly seated riser. Had the same issue with Phanteks riser, it was inserted in a strange way. Risers are generally pain in the butt.
Can't get this motherboard stable ram timing stable pass 5800mhz. It crash under gaming.. 5700mhz is the best i can do. Timing sucks on this mb. But the bot time is impressive. Faster than any other mb am5 i tried.
@@magneticflux nope, because limited of pice lane from 8500G (only 10 lane). So possible config was 4 (main pcie slot)+ 4 (nvme)+ 2(nvme) because all 2 nvme on this mb link to cpu not chipset
Its a decent board, I’m using it right now. Felt like a safer choice than this. You only lose pbo and manual oc but can undervolt with “classic” negative offset.
@@toys1337 Do you think this b650i board will be good enough for a 7500f ryzen? I want something that is not fancy at all, no OC at all or high frecs. 😅🎉
@@rafhaelmiranda8449 Ossada... Comprei ela com o intuito de montar uma build mais suave com o Ryzen 5 7600, mas acho importante salientar que esse problema não é específico da Jginyue, mas sim de várias marcas de placa mãe que apresentam essa falha na construção.
Hey man, great vid, don’t sweat about the failed test, you put in the effort to upload these videos, it’s very hard to find content on these products, keep up the good work👌
I was considering buying this board and I was skeptical of its performance. Thank you for the testing!
did u buy it?
@@churka111. Nope
this board have trouble running at 6000mhz ram also u need to turn it down to 5200mhz to make it stable.
Шикарное видео, отличная музыка. Я увидел то что хотел. Спасибо.
Делай ещё.
*Good stuff, I got a Maxsun B650 wifi, I will test this one next.*
Great channel :) you are doing the videos we all want to see! Keep it up 👍
No bios update since December means it still has no support for 8600G/8700G, oudated Agesa etc. Always a problem with chinese they don't keep the software up to date, often there's never any update at all, like mini pcs...
they just updated it on 23/2, and now support 8000 series
@@tommy2117 watt usage bug fixed ?
You need to consider that they are just a small firm, which means latency for updating bios. This is the problem of tight budgets, instead of Chinese brands
Must have to know that this motherboard only sells less than 100 bucks. Not mention to b650 itx, you can’t even search better b650 matx ones in such price
@@MaqaChina they not even make it , all this small firms order from one OEM factory , and they pay for each update if needed .
안그래도 배송오고 있는데... 영상 감사합니다.
Hey, nice video. What about the VRM temperature? Is it under control? Thanks for sharing.
Thank you so much for this video. I went to JGINYUE's site and found that there is a new UEFI update file for download. Did you find in the UEFI any option to enable AMD SVM (AMD-V)?
Great Work, i'll buy this mobo
Great job, bro. Thanks. 👍
How do I increase the vram on this motherboard? I have Ryzen 9 7900x and I'm having problems. Need help
Can you enable xmp with this board. Also when was the latest bios update with this board?
Hello, thanks for the review, do you know if the 4x4x4x4x branch is possible on the PCIe x16? Ty
아수스 긱바 msi 애즈락 등 메인 브랜드 말고 서브 브랜드들도 성장해서 선택지가 조금이라도 넓어졌으면 좋겠네요
Hello, I have a problem and it is the following, it turns out that I have a pcie 3.0 extender and the motherboard only works with pcie 4.0 and I don't know how to solve it since I bought a b550itx from the same brand a long time ago and they gave me a modified bios with pcie 3.0 and on the b650itx there is no such bios, if I buy the extender it will be a month and I need to use the PC
they updated bios, now you can switch to pcie 3.0
wait this videos didn't mentions anything about the wifi card, what wifi card manufacturers they use MTK or Intel?
or we should bought the wifi card ourself? 😅
No wifi card, you need to install one yourself.
was considering to try it, but then find out a620i lightning from asrock and its absolutely amazing for its price :)
What is the better option friend?
A620 chipset has limitations in wattage of the CPU and no PBO so is not recommended
a620i lightning supports CPUs up to 170W, it also has 8+2+1 stages 60A each, thats more than enough for 7500f/7600/x/7700/x/7800x3d/7900, PBO grants like 100-150mhz/3% increased performance @@ivantsipr
No debug led on ASRock.
Hey, i have a Patriot viper venom ddr5 5200 cl40 64gb kit that i can run at 6000 cl36 using manual timing from buildzoid , you know if this mobo can run the same overclocking? Also any word on future bios updates to support 8000/9000 series processors? Thanks for the review
The amount of information released on the website is too small, and I don't know if I will support the next generation of CPUs in the future.
In the case of memory overclocking, we have seen a successful case of 6000Mhz CL36 on a community site.
@@DalraeMyo thanks for the info , it's interesting mobo for the price but for now I will only watch if they support future gen , looking to move to itx but other options are quite expensive
이와중에 공홈 바이오스 BETA가 아니라 BATE라고 적혀있네요 ㅋㅋㅋ
I think I'm gonna pick this up the Price is too good
안녕하세요, 놀라운 영상입니다!. 보드가 리눅스를 지원하는지 아시나요?
아쉽게도 제조사의 웹사이트에서 제공하는 정보가 너무 한정적이며, windows OS 드라이버만 제공합니다.
Csn you please try the new Agesa version.
And can you please show us memory speed overclocking speed results wigh Aida ..
Please, how i undervolt my 8700g in this board
Hello friend. Have you found out how to enable expo on this board? I chose 6400cl32 but it keeps loading at 4800 mhz..
Try manually adjusting the memory voltage. I looked up community reviews and saw reviews that successfully applied EXPO by manually adjusting the memory voltage.
is voltage, power draw reporting issue fixed with newer bios?
нет
好家伙这都能看到精粤，B站有号吗？
영상의 조립 부분 전반부만 시청하시면 되며, 테스트 부분은 시청하실 필요가 없습니다.
Where is the undervolt section. I can't seem to find it anywhere
CPU voltage was only supported by entering manual (direct numerical) (offset mode was not supported)
Fortunately, for AMD CPUs, the undervolting feature can be replaced by Curve Optimizer.
Except there isn't one in this MB. I had a msib650i and it can undervolt. This board isn't a b650 chip but more like a b620 @@DalraeMyo
@@TurboD16z6 there is curve optimizer option in amd overclocking menu when pbo is set to advanced
Does the ryzen 5 7500f workbon this?
yeah
Yes, the 7500f is compatible.
How do I switch it to pcie gen 3. I'm running a riser sandwich and the no option for PCIE 3. Help...
install latest bios, they added an option to switch to pcie 3
@@Liphibut then I run gpuz and it said x8 only. And default it's x16 in bios
@@Liphibut in gpuz it said x8 only.
@@TurboD16z6 strange, which cpu ang gpu do you have?
@@TurboD16z6 probably cheap or badly seated riser. Had the same issue with Phanteks riser, it was inserted in a strange way. Risers are generally pain in the butt.
I wonder if this will work with a 7600f and if the top tabs also get a English translation ( in the bios)
i think they will in the future, because others mainboard from their branch have that in english
I checked the 7500F operation, it is available.
Unfortunately, even if you change the language, the menu name on the top tab is only in Chinese.
@@DalraeMyo top tab is a logo I guess , not a text .
@@DalraeMyoso when I bought it the seller said it had wifi, turns out I need to add a wifi card into it do you happen to know which ones would work?
Can't get this motherboard stable ram timing stable pass 5800mhz. It crash under gaming.. 5700mhz is the best i can do.
Timing sucks on this mb. But the bot time is impressive. Faster than any other mb am5 i tried.
Try to lower the voltage of VDD.
This mobo is cheap and beat other pricey itx mobo in the market
Got my borad with 8500G, the front is x2 and the back is x4 for nvme.
On this board the m.2 slot with the Cooler is only X2?
@@magneticflux nope, because limited of pice lane from 8500G (only 10 lane). So possible config was 4 (main pcie slot)+ 4 (nvme)+ 2(nvme) because all 2 nvme on this mb link to cpu not chipset
absolutely arm tem.
Wheres the cmos battery located?
Под радиатаром охлаждения
조립의뢰는 안받나용..?
저는 컴퓨터관련 종사업자는 아니고 단순히 취미로 제품을 다뤄보는거라 따로 조립의뢰는 받지않습니다.
Is motherboard power limited to 135watt?
I hope not
actually not
저 원인은 UEFI 펌웨어 문제 때문인가여??
저도 정확히는 모르겠습니다. 정보도 한정적이고, 아직 BETA바이오스라 불안정한건지 아니면 제품자체에 살짝 문제가있는지 모르겠습니다.
@@DalraeMyo 그러면 저 보드는 비추인가여??
가격대비 하드웨어 스펙은 경쟁제품대비 압도적이라고 생각합니다. 다만, 소프트웨어 완성도나 사후A/S부분이 많이 아쉽다고 생각합니다. 커뮤니티 후기를보니 만족하며 쓰시는 분들도 계셨습니다.@@stellina4557
@@DalraeMyo 확실히 드라이브 모스펫이 붙어있어서 좀 놀랐습니다.
하드웨어는 제대로 만든다는 느낌이여서여.
펌웨어만 잘되면 아마도 대륙의 실수가 하나 탄생할거 같던데......
징유에 팔길잘했네 msi쓰는데 너무편함
11마존에 A620I 라이트닝 19만원에 떳던데 가시나요
흐... 마렵긴하네요 ㅋㅋ
관세내 들어오면 바로 사시지않을까요 ㅋㅋ
@@rma2045 지금도 관세 내일거에요 19.9만원... 근데 제품명이 620I로 적혀있어서 그런지 A620I로 검색시 안나오네요
Its a decent board, I’m using it right now. Felt like a safer choice than this. You only lose pbo and manual oc but can undervolt with “classic” negative offset.
@@toys1337 Do you think this b650i board will be good enough for a 7500f ryzen? I want something that is not fancy at all, no OC at all or high frecs. 😅🎉
밤악마는 잘못없어......
whats up with that music? are you reviewing wine or what
Killer 2 7800x3d
Essa placa mae matou 2 ryzens 7800x3d, cuidado com isso.
Oq aconteceu? Estou tendo problemas com piscadas de tela, estou usando a placa de vídeo integrada
@@EduardoLucena-wq5jf ela simplesmente ligou, iniciou o windows e queimou o processador, foram 2 7800x3d, essa placa mãe é um lixo completo.
@@rafhaelmiranda8449 ты уже 3 человек которого я встречаю с проблемой что плата палит именно 7800х3д
@@asteriosambrelka2122 Tenha cuidado, essa placa é assassina de 7800x3d.
@@rafhaelmiranda8449 Ossada... Comprei ela com o intuito de montar uma build mais suave com o Ryzen 5 7600, mas acho importante salientar que esse problema não é específico da Jginyue, mas sim de várias marcas de placa mãe que apresentam essa falha na construção.
-징-
Does it support 8700g?
There was no Ryzen 8000 series on the support CPU list when I bought it.
yes, from the last BIOS update