If you check your book, it will tell you specifically the math for factory 45’s and field cut 45’s (because there is a difference). Some companies will order 45’s and others only order 90’s and therefore you have to make your own 45s (and odd degrees) And the trick to making odd degrees is a whole other video. (Quite simple however, just measure the bend, divide that measurement by 90, then multiply that number by your desired angle)
A aweasome trick for laying out odd angles is the 57.25 rule. You draw two lines using a square and draw a arc 57.25 inches 90 degrees. Then every inch on that arc is 1 degree. Then just mark the arc by flexing a stick ruler for example 20 degrees would be 20 inches on the arc. Snap a line back to center for your desired angle and draw your fitting. You now have 3 coordinate measurements for any angle on any size pipe.
Somebody needs to do a video on the 57.25 rule. You can also find coordinate measurements on saddles. I don’t have a camera or the computer skills for a RUclips video.
Good info. Brings back hacks my pipefitter/welder father taught me 50 years ago. They young-uns need to know this.
Very easy to understand
Hell yeah bro make more videos like this I’m a rig welder love videos like this
Great video keep em coming!
What is up with the pistol on the back of the truck?
Can you please make a video of how to do a Mira join?
awesome vid
Thnks 4 the tips!!
This is good and simply for basic.
Awesome!
Bonjour monsieur je voudrais savoir si vous pouvez traduire votre vidéo en français car je m'intéresse à ce que vous faites
How long you been wielding. I've been fitting in the plants and shop for 7 years.
shane clark I learned to weld in the mid 1980s
@@offthehookdesignandfabdotc2582 you on a line right now
shane clark not at this time.
Sir make one video full layout 45 digree offset dabale line qaual spairal line 45digree in layout please
Good video
If you check your book, it will tell you specifically the math for factory 45’s and field cut 45’s (because there is a difference). Some companies will order 45’s and others only order 90’s and therefore you have to make your own 45s (and odd degrees) And the trick to making odd degrees is a whole other video. (Quite simple however, just measure the bend, divide that measurement by 90, then multiply that number by your desired angle)
A aweasome trick for laying out odd angles is the 57.25 rule. You draw two lines using a square and draw a arc 57.25 inches 90 degrees. Then every inch on that arc is 1 degree. Then just mark the arc by flexing a stick ruler for example 20 degrees would be 20 inches on the arc. Snap a line back to center for your desired angle and draw your fitting. You now have 3 coordinate measurements for any angle on any size pipe.
Somebody needs to do a video on the 57.25 rule. You can also find coordinate measurements on saddles. I don’t have a camera or the computer skills for a RUclips video.
he has a lot to learn on this
Nice
Kool
SIIICCKKKK
45÷2=22.5tangx4.5= takeoff
I don’t think that pistol is big enough.. 😏
SMH.. C'mon Darren