The next time you use squeeze bags, don't cut the tip; use onecfrom an empty bag. That way, you can re-seal the partial one and hopefully not stink up your storage spot.
Giving a shout out to All Dogs, I ordered the replacement breather couple of years ago and it didn't fit at all, something was wrong with it. They were on top of it and sent me a new one no questions asked. That fit perfectly. Real good company.
Did the breather mod on an Xterra. Must do for any Xterra, Frontier or Titan. Note that the breather thread on my vehicle was not an NPT. It is some weird European/English thread that is different. Caution so you don’t destroy the axel hole threads. For the differential, one of the cheap Amazon hand pump thingies works well. Differential fluid is super important especially if doing off roaring or towing. Check your differential fluid to make sure all is good.
Nice work as usual! I installed the All Dogs breather key last summer on my 2013 Pro4x. The original valve was corroded shut but my axle seals seem to have survived. I can't say the same for my rear pinion seal as I seem to have a leak. Great tip on the flex bags!
@@MaximumDIYGarage I imagine you replaced it yourself? I am a fulltime traveler with a Four Wheel Camper on my 2013 Pro4x. What do you think is a reasonable charge for a shop to replace the rear pinion (I have the replacement seal)?
I just did this breather mod to my 2010 nissan titan SE and used a 1/8 BSPT to 1/4 barb fitting since I couldn't find a fitting with a bigger barb size. I hope this helps people looking for the right 1/8 BSPT (British Standard Pipe Thread (28 per inch)) fitting. Don't use 1/8 NPT bc the thread count (27 per inch) and design of the thread is different.
Hey Ry. I appreciate your work. Love my "Missing 10mm" t-shirt. Have you done or considered doing a vid on the evaq canister intake mod that stops it from getting clogged with dust?
hello good day, I have a Nissan Titan 04 and I would like to do that, but could you tell me what size the connection and the hose are please 🙏 since I don't understand your language, I'm using a translator 😁
End of breather only needs to go as far up as you will drive and most do not drive in water that envelops the electronics. Also Offroadgorilla has a better kit for less money. Better in a choice of actually a good breather.
I have a 2016 frontier, 4.0. C200K rear end. A So. cal truck. Bought new. The passenger side seal leaked. The truck has 67,000 miles on it. Not abused or off roaded. Doesn't tow anything either. Kinda disappointing. I'll make my repair and switch the diff breather out. I've had toyota trucks mostly, never had that issue. I decided to get a new 2019 Toy 4x4 SX as a back up in 2019..
My Nissan frontier with the M2 26 rear end just like this one the oil was very silvery looking. I don’t have any noise from the rear end no play and my truck has 100,000 miles and I have towed anything with it ever wtf ???
I'm not sure why everyone refers to diff oil as the worst thing they have ever smelt. I guess working on factory machines for 10 years made me use to that smell.
Awesome! You wouldn't happen to need anything for that 9-3 would you? I have a box of random stuff and a couple rotors off my 2006. And we sadly traded it in on our truck. I'll sell em cheap!
The next time you use squeeze bags, don't cut the tip; use onecfrom an empty bag. That way, you can re-seal the partial one and hopefully not stink up your storage spot.
Giving a shout out to All Dogs, I ordered the replacement breather couple of years ago and it didn't fit at all, something was wrong with it. They were on top of it and sent me a new one no questions asked. That fit perfectly. Real good company.
Agreed! It's been really great working with them.
Good practical maintenance and the breather mod is a no brainer. Well presented Ry. Have a great weekend.
Thanks Mike! 💪🏻 You have a great weekend as well.
@@Rythecarguy how many quart in the rear differential
Did the breather mod on an Xterra. Must do for any Xterra, Frontier or Titan. Note that the breather thread on my vehicle was not an NPT. It is some weird European/English thread that is different. Caution so you don’t destroy the axel hole threads. For the differential, one of the cheap Amazon hand pump thingies works well. Differential fluid is super important especially if doing off roaring or towing. Check your differential fluid to make sure all is good.
Good tips!
Thanks, great video!!! A couple of quick questions :
-Why is there so much rust under the vehicle?
-What make/model was that drain pan?
Nice work as usual! I installed the All Dogs breather key last summer on my 2013 Pro4x. The original valve was corroded shut but my axle seals seem to have survived. I can't say the same for my rear pinion seal as I seem to have a leak. Great tip on the flex bags!
🤘🏻🤘🏻
Yes, I had the same problem. Seized breather, intact axle seals, but a leaky pinion seal.
@@MaximumDIYGarage I imagine you replaced it yourself? I am a fulltime traveler with a Four Wheel Camper on my 2013 Pro4x. What do you think is a reasonable charge for a shop to replace the rear pinion (I have the replacement seal)?
I just did this breather mod to my 2010 nissan titan SE and used a 1/8 BSPT to 1/4 barb fitting since I couldn't find a fitting with a bigger barb size. I hope this helps people looking for the right 1/8 BSPT (British Standard Pipe Thread (28 per inch)) fitting. Don't use 1/8 NPT bc the thread count (27 per inch) and design of the thread is different.
🤘🏻
Excellent presentation, Ry! Thank you!
You’re welcome, thank YOU for watching.
How many sexual euphemisms can you put in one video 🤣? Just kidding. Love your videos 👍.
Thanks man, with a video about "rear ends" I couldn't resist. Have a great weekend!
Hey Ry. I appreciate your work. Love my "Missing 10mm" t-shirt.
Have you done or considered doing a vid on the evaq canister intake mod that stops it from getting clogged with dust?
Hey, thanks for picking that up! I did not know that people mod the canisters like that. Love that idea.
@Rythecarguy Yeah, just did it last weekend. Seems to be working great (no more p0448). Hopefully, it resolves the issue for good.
@@LostInStates 🤘🏻🤘🏻
Ry, what is the thing plugging the end of the breather hose?
is it possible that theres no diff breather? i have 2012 xterra pro 4x.. i went under and couldnt find the diff breather
hello good day, I have a Nissan Titan 04 and I would like to do that, but could you tell me what size the connection and the hose are please 🙏 since I don't understand your language, I'm using a translator 😁
End of breather only needs to go as far up as you will drive and most do not drive in water that envelops the electronics. Also Offroadgorilla has a better kit for less money. Better in a choice of actually a good breather.
👍🏻
I have a 2016 frontier, 4.0. C200K rear end. A So. cal truck. Bought new. The passenger side seal leaked. The truck has 67,000 miles on it. Not abused or off roaded. Doesn't tow anything either. Kinda disappointing. I'll make my repair and switch the diff breather out. I've had toyota trucks mostly, never had that issue. I decided to get a new 2019 Toy 4x4 SX as a back up in 2019..
Rear differentials are easy. Why aren't there more "front Nissan Titan differential" videos...I don't know?
Cause they already have relocated breathers up in the engine compartments. No need to do anything.
My Nissan frontier with the M2 26 rear end just like this one the oil was very silvery looking. I don’t have any noise from the rear end no play and my truck has 100,000 miles and I have towed anything with it ever wtf ???
Dif change on any truck or car at 60k 30-50k if towing or used under heavy loads
Thanks
You're welcome!
I'm not sure why everyone refers to diff oil as the worst thing they have ever smelt. I guess working on factory machines for 10 years made me use to that smell.
Haha you must have. But I am also sensitive to smells always have been. It’s so gross o🤮
Hell yeah i have a 2011 saab 93. And titan
Awesome! You wouldn't happen to need anything for that 9-3 would you? I have a box of random stuff and a couple rotors off my 2006. And we sadly traded it in on our truck. I'll sell em cheap!
@@Rythecarguy na brother this is my 5th saab and im going to leave this one stock. I even have an extra 8 coil packs myself! If you know you know lol
@@erictaylor8099 😆 right on
Amsoil did the bags first.
Sweet. I'll have to try those out.
BARB connector.
What did I call it?
@@Rythecarguy I would need to watch again, it was not Barb. No big deal we all know what you meant.