This was a video I had uploaded from awhile ago and I'm gonna share it again, because I found it to be a good case in which another technician may find it helpful in identifying directions when approaching an intermittent issue. I DIDN'T let this go without suggesting to do the switch...so please don't assume this, I thought I was very clear in the video about that...but...there's always that guy.
I have to say when your looking at the wiring diagrams on that big screen it's easy to read. My old eyes like that. Nice chase of the culprit wire and connector. As a customer we like fixes with no parts required but yeah, I'd get the switch too.
I'm kinda having the same problem but if I hold my key it will run the starter will shut off it will stay running. I took it to lot of different places they can't fine out what's wrong with it at all. I replaced everything in my car. It's a 2005 chevy impala LS 3.8 L I hope this video can maybe help me out here I been looking at different videos. If I let ago of the key it shut off it's werid to tell you the truth I been a mechanic for 6 years never seen nothing like this before I was seeing if I could get some help or maybe so information
I hate having to go under my dash. Looks like you found the problem, but I don't think die-electric grease would be needed unless there is a water problem there. I have learned to avoid getting it on the pins, because its non-conductive and can cause more problems. My car, I would de-pin it and reshape the pins for tighter fit. Thanks for the vid, need more LOL
I have never had an issue with that...been using it moderately on connectors and seals (except O2 Sensors ofcourse) and have never seen it to cause issues. Maybe I'm wrong, but if it has worked on airbag ckts connection problems I'm simply not doubting it is able to be conductive...
Wire harness cam sensor, crank shaft sensor and all grounds need to be replaced also a bad PCM and BCM can be apart of your impalas issue mines runs like new diy saves bank I'm open for business 👍👍🏽👍👍🏽👍
Only a recall is free... Unintended ignition key rotation I didn't pay any thing... This service will be performed at no charge to the owner... Free...
Mine was totally different. When it was running at a little high temperature, it wouldn’t start. It turned out to be a fuel filter . Had to drop the gas tank. I paid someone to do it for me.
This was a video I had uploaded from awhile ago and I'm gonna share it again, because I found it to be a good case in which another technician may find it helpful in identifying directions when approaching an intermittent issue.
I DIDN'T let this go without suggesting to do the switch...so please don't assume this, I thought I was very clear in the video about that...but...there's always that guy.
Ivan “no parts required” would approve. Nice work.
😂 I love Ivan!
Love music in background. Nice job, very usefull
Thanks for your feedback and support 👍!
Thank you Pauly. Good job. Have a blessed and safe week.
Thanks Billy, you too my friend!
Nice job brother these are tough ones to diagnose. Thanks for sharing.
cool video dude, keep adding more videos its really good info!!!
Thanks Emerson...I appreciate your time and support 🙏
I have to say when your looking at the wiring diagrams on that big screen it's easy to read. My old eyes like that. Nice chase of the culprit wire and connector. As a customer we like fixes with no parts required but yeah, I'd get the switch too.
Thanks Wyatt!
Well done video. Very helpful.
Awesome thanks for watching!
These cars are under recall. Airbag failure and ignition switch failure.
Good to know thank you.
Thank you
I'm kinda having the same problem but if I hold my key it will run the starter will shut off it will stay running. I took it to lot of different places they can't fine out what's wrong with it at all. I replaced everything in my car. It's a 2005 chevy impala LS 3.8 L I hope this video can maybe help me out here I been looking at different videos. If I let ago of the key it shut off it's werid to tell you the truth I been a mechanic for 6 years never seen nothing like this before I was seeing if I could get some help or maybe so information
Great job
Thanks Alesky...hope you are having a great weekend my friend 😀
This is EXACTLY what os wrong with my car right now. Exact..gas gauge going down etc. This is my issue i need to address
Perfect thanks for watching!
I hate having to go under my dash. Looks like you found the problem, but I don't think die-electric grease would be needed unless there is a water problem there. I have learned to avoid getting it on the pins, because its non-conductive and can cause more problems. My car, I would de-pin it and reshape the pins for tighter fit.
Thanks for the vid, need more LOL
I have never had an issue with that...been using it moderately on connectors and seals (except O2 Sensors ofcourse) and have never seen it to cause issues.
Maybe I'm wrong, but if it has worked on airbag ckts connection problems I'm simply not doubting it is able to be conductive...
Tell the costumer too take all the keys of there key chain so many ignition switches fail from heavy keychains
Truth, but those ignition switches were trash to begin with you know?
Lol my 2005 otw to Chevy for a few recalls don't fall for the diagnosis lmao 😂😂😂🤣 no just the free work please thank you...😉
🤣 oh yeah
Wire harness cam sensor, crank shaft sensor and all grounds need to be replaced also a bad PCM and BCM can be apart of your impalas issue mines runs like new diy saves bank I'm open for business 👍👍🏽👍👍🏽👍
@@BlackWolf-ly4sq We fix one by one and we are on to another. Wonderful to have success in our endeavors! Congratulations on your new journey!
Dealership doesn't fix it for free ??
Only a recall is free... Unintended ignition key rotation I didn't pay any thing... This service will be performed at no charge to the owner... Free...
Mine was totally different. When it was running at a little high temperature, it wouldn’t start. It turned out to be a fuel filter . Had to drop the gas tank. I paid someone to do it for me.
Lmao dammit I fixed it I wonder why you were mechanic 😂
Right 🤣...good point!
Thanks for your support and feedback my friend.
@@PaulysAuto haha np just thought that was funny have a good one bud
Anyone else notice Sure Track suggesting a tie rod end for fixing communication fault codes lol.
😂😂😂 yeah, I don't get it, I already tried replacing both of those; yet the car still didn't start?
😎💯
Thank you for your support God-bless you
the clock went to 12:00 also