Handmade Angle Grinder Stand
HTML-код
- Опубликовано: 13 окт 2024
- Hello Friends!
I will show you how to make real tool that are not mocks.
Today I Make a Angle Grinder Stand.
This Stand is a grinding stand which is cheap and easy to make.
【Plan】
jisaku-koubou....
【Plan List】
jsk-koubou.sto...
Parts
Grinder :amzn.to/2GvGb1g
MOUNTING STAY :amzn.to/2GrJbeX
Spring Hook:amzn.to/2IhtHMw
Bearing:amzn.to/2STHrkr
Miter truck:amzn.to/2SDaB89
Tools
E3 screwdriver:amzn.to/2KYFgpH
Nibbler:amzn.to/2GsNkiP
BGM
Lensko - Circles [NCS Release] • Lensko - Circles | Hou...
/ lensko
/ lenskoofficial
/ lenskoof. .
Music promoted by Audio Library • Circles [NCS Release] ...
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
色々な工具を丁寧に作られているのが、何だか落ち着きます。
Your videos are meditaton for handcraft people. Its really fantastic to see how accurate and how precise and calm you work. Really enjoyable and the music is perfect!
丸鋸ガイドとボール盤、万力等作成して使ってます。理にかなった制作工程に敬服して居ります。
いや~素晴らしい。自分では無りなので、見てるだけでいいや~!!
Terbaik. Tidak ngawur. Semua dlm standard. Bisa dijual.
Dear Sir,
Your angle grinder support is exceedingly well built with a great deal of attention. An example to follow indeed. Very well done. Kind regards.
Dear Sir,
Thank you very much for your hearted response. Look forward to seeing your next project. Kind regards.
いつもJSKさんの高度な技に感心しながら観ています。私も多少DIYするのですが、アイデアを考えだすと楽しいのですが、夜眠れなくなります。(笑)
As usual, arigato for the brainstorming to simplify your creative/intricate solutions!
I think there is no other chanel where you can see those precise and clean working. Everything fits perfectly always. Its so fully relaxing to watch you working👍
DIYに興味があってやりたいと思っているので凄く勉強になります
!ありがとうございます!
Very nice! The only recommendation I can make is to use aluminum angle iron for the clamps instead of mild steel (if that’s what it was). It’s best practice to minimize areas of potential galvanic corrosion, especially if you have thick steel parts on thin aluminum sheet.
Gracias a Dios por fin un vídeo Donde No hay que soldar....ya quisiera saber soldar!
Please remove music... I started watching this craftsman in part because there was no annoying music or commentary. You could hear the equipment and ambient sound which is perfect for someone trying. to learn from a master. Mr. Koubou, please continue to make the videos you have done without music
really glad he stopped adding music in all his recent videos 😂
What a clean build, from design to execution. Your video is exceptionally well made. Truly a joy to watch.
Отличная работа. Качественная работа и смотрится красиво!
Great job. Quality work and looks beautiful!
Estimado amigo, que buenas herramientas de trabajo hace usted, lo felicito y le reconozco su amplia inteligencia para crear. Es un honor seguirlo.
Saludos desde Cuernavaca, México
Their techniques and skills are impressive.
You make everything so precise with such great skill. I'm sure this will be a high quality accurate cutting grinder. Thanks for sharing 5⭐'s
IDEAL AND CLEVER MAN everything you have is ideal
MUHTEŞEM ÇALIŞMALAR ZEVKLE İZLİYORUM,👏👏👏👏
美しい作品と非常に細心の注意
Loved the way you mounted the grinder. HATED the music. Thumbs up for the quality of work, not the music!
đơn giản và thông minh.tôi sẽ làm theo cảm on bạn rất nhiều. ý tưởng quá tuyệt. from VietNam
very good.. Amazing work Congratulations on another beautiful project.
well done roko ba roko you are the man... truly..
Seu trabalho é admirável! Gosto do seu capricho. Me inspira.
Четко, ясно и красиво. Но стойку для болгарки я бы укрепил саморезами. Гайки на уголке приварить. Понравился искроуловитель (коробка), на пилораме пригодится.
Que maravilla amo la perfección, siempre la procuro es un honor seguirlo; desde hoy 25 de junio del 2021 saludos desde lima-Perú.
Çok iyisiniz emeğine yüreğine sağlık herşey gönlünce olsun selamlar
I really like your videos because you are very capricious, my congratulations
Zen in motion. Nice.
From Greece -Athens ....you are specialist !!! This project is perfectly !!!!!
Todo mi reconocimiento, admiración y respeto para un Excelente y Bello trabajo, Maestro!! Saludos desde Nuevo Laredo México!!
Beautiful design and well made in Japan. Thanks for the sharing and the inspirations!
04:44 to correctly check for parallel, mark edge of disk, take measurement there. Rotate disk 90 degrees, take 2nd measurement at disk mark, eliminates disk distortion error, gives true parallelism reading.☺
grandioso...complimenti per il progetto…!!!!!
非加工物を押さえるナットの接着は内側がより信頼性がありますね!
その点は動画で説明していますよ?
Viry nice craftmanship
Excellent! It's so beautiful and amazing!!!
VERY VERY GOOD!! PERFECT!!!
Estupendo trabajo...
Excellent job
Very very good job sir
Sou fã do seu trabalho,meus parabens pela beleza de como vc executa suas tarefas e criações, vejo com muita admiração todas. Abraço do amigo do Brasil. Valto Alves.!
Just .... wooowww!!!!
Very clever design and excellent construction! I would only change the 2 nuts to the other side of the angle bar, so that it was not only the glue opposing the clamping force.
As always, perfect 👍👍👍👌
great idea! I will definitely build my own version. thanks a lot!
Good evening 😃🌃 Good. 😆👍️
I love when everyone does exactly
Arigato gozaimashu for your idea
Nice video. If your epoxied nuts do not stay on, consider silver soldering. Almost as strong as welding when both surfaces are very smoothe and matching, Much more heat resistant than epoxy.
Thank you
I'll give it a try!
gayet başarılı ellerine sağlık güzel olmuş
焦げちゃったw
後ろの火の粉受けに、
コンロ用の油はね防止バネルなど
使えるかもです。
あぁ!いいですねそれ。
小屋を作った時の石膏ボードを使ったのですが、重いんですよね。かさばりますし。
Como siempre un placer ver tus trabajos, un laik mas para ti amigo.
Me gusta es perfecto gracias
Always creative, thank you very much..
Как всегда аккуратно качественно🤝✊
自分にはインパクトとグラインダーしかなく、精密な計測器はないのですが作れますか?レンガ切断と金属切断・研磨を目的にするとレンガ用に合わせた所でスタンドの強度に違いがでるのですか?教えて欲しい
Very informative video
Sophisticated and great production
Hi! I love the build. The aesthetic touches, like the aluminum plate are great :) What did You use for the shaft? Thank You!
こんにちは!私はビルドが大好きです。アルミ板のような審美的なタッチは素晴らしいです。ありがとうございました!
very nice
Sooo perfect 👍👍👍👍
Everything perfect!!except the music!!
Good idea my friend. Congratulations!
Hey JSK, wow..I hope you can understand what I'm saying? I really appreciate videos and channel. You do awesome work too.
But, does your shop look like. It would very interesting to see your shop that you work out if
ingenios ,!
私は市販されているSK11のディスクグラインダースタンドを使っているのですが、切断の時に直角が出ない欠点があり、かなり遊びがあるのです。
上下するアームの支点にはベアリングが使われていなくて、どう調節してもアームが左右にぐらつきます。
多分、支点部分の作りを変えないとアームの上下可動時の歪みが取れないでしょう。
動画を参考にして改造案のポイントとさせて頂きます。
Nice 🙂
Треклятый перфекционист! ))
Я думаю перфекционистКА!
بسیار عالی
Wow, amazing build.
super ....genial que buen trabajo amigo felicitaciones
Nice Bro
いつもながら綺麗なシナ合板?使っておられますね。いいお値段しそう(^_^;)
ホームセンターのシナ合板なのでさほど高くないですよ。1600円の板を買ってきてそれで間に合いました。
でも、アルミ板を買うまでは市販品より安く作れたのですが、結局高くなってしまいました。
I like the work
Perfect measurement & perfect work thankyou sir 👍
こんにちは私もこれを作っていますが、知りたいことがあってこんなにメール送ります。 ここに使用した 龍鬚鐵どこで購入しましたか? いくら探してみてもないですね アマゾンで購入しましたか。 もしかして購入した売り場があれば、リンクをちょっといただけますか。 ありがとうございます。
合板シャーシパーツに金属パーツ(可動部)を組み込むときの接着剤は何を使われているんでしょうか? 木材用タイトボンドの色と同じなので不思議に思えました。
Excellent, but the cut was ordered at 45 degrees. Thanks for your teaching
Mr. JSK, Congratulations! I have already whatched in other your video a blue squared board. Did you buy it in Japan? Please, where did you buy it? The squared of this squared board is in "mm" or in "inches"?
Very great work but I think you should put something in the box that can absorb the shocks of the iron-iron frame even stabilizes within the box. I think the aluminum threads will be useful. Or anything else . Thx too much
thank you for the advice
I made a dust collection box with aluminum plate, but aluminum threads is a good idea.
I think steel wool is good.
ruclips.net/video/hf0iSgnvFu8/видео.html
Is it easier to operate the grinder with yor left and even if you are right handed?
Super sir thank you
Sin palabras, felicidades amigo
I was wondering and it may have already been done but I haven't found it. I was wondering if it is possible to make a mini table saw out of say...a angle grinder? And if not a angle grinder then what other tool could be used to make one? Thanks in advance for answering (if you do) and if you don't then maybe someone else can suggest something to answer my question. Thanks.
bravo, 自作工房 , bravo.
Реально круто
Я бы не рискнул такой опасный инструмент крепить на клею.
Verry good
Excellent quality!
En que dirección puedo comprar los productos
Well done!
Accurate master.
Ori goto! Thank you this is an awesome design!!
いつも楽しく動画を見させていただいております。
自分でもマイタートラックを使った工作機を作ろうとしています。
さて、JSK-koubouさんが使われているマイタートラックは、断面形状からして、
アマゾンなどで売られているCarAngels製や、モノタロウのイマオコーポレーション製とは違うようにお見受けします。
もし宜しければ、メーカー名を教えていただけないでしょうか?
中心部に溝があって、穴あけしやすそうです!!!
awesome except the music.. omg had to switch the sound off.. i want to hear the shop sounds not some lame 90s techno music, domo arigato
Wow! Impressive!
Good design, impecable make and very well exposed process. Only a pair of improvements, the glued nuts of the clamps should be fitted on the opposite side of the angle profile, for obvious reasons, and perhaps a pair of plugs in the ball bearings housings in order to avoid dust accumulation. Subscribed from now!
thank you for the advice.
This bearing is a dustproof grade product, but I think that a housing is also necessary.
Next I will make a large drill stand. looking forward to!
どうやって構想、試作、モデリングに進めていくんだろう