Speed Binders - Two Year Tear Down and Review- PLUS - Trucking for
HTML-код
- Опубликовано: 12 сен 2024
- Talking about the good, the bad, and the ugly with speed binders. Check it out as I tear them down and go through them to see what is holding up and whats not. Then we head off to do some trucking for farmer chris. Thanks for watching!
#captainkleeman
#truckdriving
#speedbinders
Boy that Farmer Chris must be a real sucker buying everyone’s leftover concrete!!
Beats paying for $140 a yard and all the labor to pour a retaining wall, that's for dang sure. And a fella can move the wall anytime. Sounds pretty smart if you ask me lol
One thing for sure he's smart enough to stock up on it when it's cheaper just like all that clay pipe he has stocked up on too. 😉
We only have one concrete supplier within 100 miles, and they said the "$140 a yard" is now a "limited time offer" so those blocks seem smarter at $40 each. Wish I could get them here, I'd have a big stack of them!
Farmers are wise !
It is not really leftover, just precast 😉
You said dodo!! I felt my inner 5 year old come out!! Then you stopped and laughed about it. Classic!!
Hahaha
Always enjoy your vids, even when they have absolutely no relation to anything I ever do!
Lol thanks!
When I saw you fumbling with that freshly welded piece of metal I said out loud "Mike, you're a firefighter - put water on the damn thing" I hope all is going well for you and yours. Great video!
Was it hot? No, i just didn't want to look at it very long.
GREAT JOB and TIMING! Seems like a decade ago that MIKE introduced the SPEED BINDERS and many channels use them and others don't. Hats off for your efforts in this video to do a MEANINGFUL follow-up INCLUDING - UPDATES, MAINTENANCE, REPAIR, DISASSEMBLY & back! The manufacturer should use your video VIRAL!
love to see how well you maintain safety for other drivers by keeping the deck clean, and checking and rechecking the chains.
thanks.
:-)
Thanks!
Did you Say "Do-Do" 🤣🤣🤣🤣, We are looking forward to the next lot of videos!! 😊👍
Thank you for showing your take down. You talked about salt on roadways. And you mentioned ( Fluid Film) worked meany year driving the rigs that put the salt & Sand plowed the snow and ice off roadways. The last year I worked drove the salt BRINE sprayer. We had a tank on dump bed ( 700) gallons. Instead of sander box spreader. I would spray down the read drive axil of dump truck everytime I came in to refill tank, or take a lunch break. End of shift. Spray fluid Film all over, I also used WD-40 in spray bottle. Just buy it in gallon container. I can tell you are SALT brine dump truck had no corroded issues on axil. Some of the other trucks that just used water to clean of axil, well I saw a lift base support completely cracked in half. You ask why the other trucks were not sprayed with ( Fluid Film) my supervisor thought I was full of BS, he was a total control freak, very EGO driven. If he did not come up with idea, it was all garbage as far as he was concerned. I can tell you from driving the trucks that get beaten with the salt BRINE the most on vehicle. That ( Fluid Film) works, please people try it. It helps also on loader bucket. Coat bucket with film completely. Let it sink in. It will keep dirt from sticking to your blade's and bucket's, it works.
258k views as of my comments on Dec 31st not too shabby there my Captain. I wish you a Happy New Year , favorable winds ,fair seas and good sailing there sailor.
I appreciate the 2 year update on the speed binders. I was waiting to see if they lasted before I invested in some. Being rebuildable is definitely a plus. I'm usually cautious when new stuff comes out and wait to see if it lasts. I'm still not sure this whole internet thing will work out. 😁 Stay safe brother.
It's refreshing to see a tool that's well-designed, and accommodates DIY repairs, AND user-replacement of hard-wear components.
Being able to replace the worn parts is a huge plus
At the beginning I wondered what in the world was a speed binder - well at least I had worked it out before they were put to use. Thanks for the lesson. Always learning.
You amaze me you are so versatile that you can do all that you do and let's not forget you are so inventive!
Thank you Gayle!
I think it is ausom that you are a Firefighter , l also am a Firefighter in my home town for going on 30 years. Volunteer that is too me its very rewarding to help ower neighbors ,keep up the ausom work and be safe ! !
Thanks!
Can’t beat the price for those blocks and you can do so much with them. Speed binders good for you with all that hauling you do for DP. Keep them coming 👍🇺🇸
Thanks Max!
Another great video, you always make them exciting to watch. great content. Thank you, enjoy watching all of them.
Thanks for watching Andy!
And NOW for USING the SPEED BINDERS for GOOD BUDDY - MASTER 'CHRIS'! That was a SMOOTH operation to say the least. On the first block I was surprised how his tractor rolled up to the block EFFORTLESSLY and said, "THIS WAY - LET'S GO"! All went well and as always, I love the care you take of MIKE'S equipment regardless what it is!
Snap over binders, ratchet binders and speed binders ... what next? "Space Binders" ... sounds like a 60's cartoon.
Last time I had a chance to use a binder there was a choice of ratchet or snap over, I garbed the snap over binder because I had never used a ratchet style and didn't want to take the time to learn in the heat of the moment. Yup it has been awhile.
Thanks for showing how that magic worked ... LOL Video as usual grand slam.... Oh oh oh TouchDown!!!!!! sUperBowL.
Oh space binders would be cool
Very nice video Capt. Loved the walk through and review on the binders and always nice to see when a company takes customer input and tweaks accordingly. That's a pretty fancy valve with a float feature you got there, should come in handy for that post pounder you've talked about. Can't wait to see the mods on the 755. Keep up the great work and thanks for bringing us along for the ride 😁👍
Hope it works the way I want it to!
@@CaptainKleeman I've got faith in ya 😁👍
Cmon Michael..... this is a professional channel...... no do-do jokes.....🤫🤣🤣
Lol
Glad DP likes the speed binders but i will stick with the old reliable binders.
Love the sound of the Mack going thru the gears. Brings back memories.
It's a great rig!
i remember as a kid we had a ponderosa in our town great food. chris getting them cheep so when you need them smart. speed binders sure make life easy with fluid film my go to to stop rust. fun time captain cheers.
Thanks for watching!
Captain you always say you’re no mechanic but you’re very handy at what ever you attempt to do! Thanks for sharing! Kevin
Thanks Kevin!
@Captain Kleeman The reason why a good drill works better than a impact gun on the chain binders is because a good drill pulls (turns) at a consistent pressure where as an impact is as it name implies uses repeated impact to loosen/tighten a fastener. That is why an impact can loosen a stuck/seized fastener and not break it compared to if you put a long “breaker bar” on the same stuck/seized fastener and pull on it you will break it.
FYI if you are assembling something that is carbon steel on carbon steel you are far better off using a good quality“Waterproof Grease” than Anti-Seize. Anti-Seize is best used on Aluminum, Stainless Steel and where dissimilar metals come in contact with each other such as Aluminum and Steel. Most Anti-Seize compounds are Not Waterproof nor do they have good lubricious properties. Anti-Seize is meant to prevent galling and to inhibit galvanic corrosion it was not ever intended to be a carbon steel thread lubricant or rust inhibitor. That said some Anti-Seize compound now have some lubricant in them because of the chronic misuse of the product because nobody read the material data sheets and instead thought if this goop turns me and everything else silver that comes near it as well as costing a lot more than a petroleum based or synthetic waterproof grease that it must be better but in reality it’s not. The easy self test of how well or not anti-seize stays around on threads in the weather is to disassemble something you put it on after 6 months or so in the weather compared to something you assembled using a waterproof grease. The reason I keep emphasizing waterproof grease is because many greases that are plant based are not waterproof and even some petroleum based ones because of how they are refined are not waterproof.
Just a FYI when I was still driving I used to break apart pallets and cut the boards down from them to use as on hard edges to prevent damage and keep my chains from coming loose. Lastly one thing you or DP might consider is instead of a cordless drill to tighten the speed binders I’d use the an good quality air drill (No Harbor Fright) and install a 20 gallon (or more)aux air tank on the truck or trailer that way as long as the truck has air your drill has power and you never have battery problems again.
Have to say I remember when those concrete blocks were 10 bucks, admittedly they were not poured in as nice as form nor did they have the locking ridge, I think the concrete company I used to get them from went up to 20 a piece but if you paid cash and bought 5 you got the 6th one free
Great job fixing the binders Mike
Good video Captain because of DP and you I bought some Speed Binders last year and won’t ever go back absolutely love them! Keep up the hard work!
Hey that's awesome!
Farmer Chris must be from Texas. Stick you coming and going. Many plants here like that.
Waboom grindy grindy 😂😂😂, I'm ready to see you tackle that one, hopefully she'll be up and running soon!
Fingers crossed!
🌟🌟🌟🌟🌟Amen on that hay spear, I would get nervous when ever someone was around me. HAY - How about that 3pt spear LOL
Awesome seeing wasted concrete NOT be wasted 👍 I'd pay for those blocks.
That ol Mack sure sounds good!
Definitely!
Those binders are sweet. Great Video...
Thanks for watching Thomas!
I had a job in winter of 08 driving a mixer. I use to set up those form boxes for the bin blocks. We had some with a big rubber pad form That you oil up and put in the bottoms To make the stone face . Everyone around here uses them with caps to build retaining walls because they’re pre-engineered. You can go pretty high with them without drainage or Geo grid ! Great video
You've driven most all out there. I'd love to drive your PETERBUILT actually. Today would be nice - SUNDAY driver! Take care! (see you on your channel!)
@@sonnyblazer5504 it is fun to drive!
Wish they did the textured face here. That would be nice
@@CaptainKleeman it’s just a one inch rubber pad . Same brand of box that you have there . You should sell them on the idea !
It’s always the little maintenance issues that cause the aggravation especially when you need to be somewhere and it malfunctions causing a delay. Liked the vid sir, thanks for the ride along.
Thanks for watching Terry!
Always good, Captain. Thanks.
Thanks for watching!
Speed binders must be doing something right . I see lots of Herc rental delivery trucks using them . Andrew Camarata will put his through the torture test lol . Be safe Captain K
Those are pretty nice binders. I like . I also like the bi-focal windshield.
Looking good
I may have to spring for a set of them now!
Well at least you didn’t break the trailer yet😁
Hey I actually had to let the trailer brakes build air before backing out of the shed, that's pretty neat. Trailer is awesome!
@@CaptainKleeman that’s funny
Everyone kept telling me to make sure it was Kleeman proofed 😂🤣
Fun Video. I need to get two of those, should have when they were @$40
Happy Sunday Capt
Happy Sunday!
Something also worth mentioning on speed binders, or Atleast in my opinion Because it’s the reason I bought them - due to mechanical advantage of a worm drive setup, it’s very very difficult for them to loosen up from vibration going down the road. For what it’s worth.
Very good point, I've never had one loosen up on me from the binder itself. It's always from things like today, the concrete chipping or something like that.
Great point Jason. I have also found that placement of the handle against the floor of the trailer allows the handle to act as a reaction bar, storing all the energy and keeping the binder from loosening. Properly tensioned, it should take about 15 -20lbs of pressure to lift the handle off the floor.
Great video Mike
Love it! Outro had me giggling 😂 boom Grindy grindy that’s the way most my work horses end their days 😇 I only ever buy beaters with heaters these days ( diesel creeks phrase pinched ) as my daily driver as it can be abused without worry 👍🏻
Exactly! I need a sticker that says "this car Means nothing to me" to get rid of tailgaters don't ya think?
@@CaptainKleeman I agree 100% stickers all the way to the scrap yard😇😂👍🏻
I had an old Monte Carlo that did the boom grindy grindy thing. That's what it sounded like.
@@CaptainKleeman Good idea.
I'm not very early this week but I can say when I scan thru my youtube subscriptions and Captain Kleeman is in the listing I choose it as my first to view..ahead of Matt's OffRoad, Fab Rats, Diesel Creek and many others, Might be the theme music??
Hey I appreciate that, but those are all awesome channels!!
@@CaptainKleeman I watch you 1st, then the others are viewed according to their interest level at the moment....Your channel is better than you realize, I suspect as the percentage of people who are exposed and watch exceeds (let's say) 10% your growth curve will raise progressively higher and faster ...now a question, Do Native American Trail Trees hold any interest for you? Seems like a low maintenance item, you already have the resources and growing several replicas could add a few minutes of content when ever you wanted to include it,just a thought.
I do do, you do do, we all do do. 🤣🤣 Yes Mike. Just welded parts ARE hot. 🤣🤣 Love the video.
Lol
Great video, nice binders for sure.
Thanks Chris!
If you save 2 minutes per speed binder each use ,thats about 40 minutes for those two loads,well worth it.
Definitely
Cool, nice job capt. Thanks for sharing!!!
Thanks for watching! Saw your email, give some time but I'll send you a link
@@CaptainKleeman no big hurry thanks
For as much flack you catch from an unknown person, your sure a hell of a hand to have around Capt.
I hope the Subie is repairable! It would be a sad day if my beater Subie died! Lol! Looking forward to seeing what you do with the valve!
It's just the rear diff,. Good as long as I don't need AWD
Those speed binders look pretty handy, the Subaru went kaboom grindy grind 🤣🤣great video man
Thanks!
Love your buddies blue 1995 Toyota mini . We have an 89 and 95, plus a 2003 Tacoma
He had a RUclips channel called CByotas
@@CaptainKleeman I’ll check him out..
Buy one of the ( CAT) potable CJ1000DXT
You can play in your drill, AC power plug in on it. Then you can charge it from your truck with converter. That way you can carry it around with you to chain binders. I have used mine to lift dump trailers, that battery had lost it's power to lift the heavy dirt load. Sorry for all the input. But because you were talking about maintenance issues.
Great video Captain!! I happen to be a fan of these!
Thanks Steve!
Great video as always Mike. This comment is sort of pertinent. I went to the lumber yard with my nephew this morning to get some,,, lumber. It was time to tie it down, so I said Chris, do you have rope or ratchet straps? He had one rachet strap that had frozen mud in the ratchet. I told him again for the 57th time, maintain your sh&^ so it will work when you need it. You should also carry more than on strap when you get lumber. He takes after his grandfather when it comes to equipment maintenance.
Cap’n… it works! You said that diesel was $3.99 / gallon. In fact it was $3.999. Or for all practical purposes $4!
Why you ask is all US retail fuel pricing listed with the 9/10’s of a cent? Well, us old farts know.
First, The practice of tacking 9/10 of a cent on the end of a gas price goes back to when gas cost only pennies per gallon and was a tax imposed by state and federal governments. Gas stations added the fraction of a cent on the end of the price instead of rounding up the price.
Since then, the taxes have increased exponentially. Why didn’t the state or feds just go ahead and roll up that extra 1/10th of a cent?
Two reasons… early on, local retail sales taxes were less than 1%. Rounding up wasn’t allowed. So, if I bought a pack of baseball cards ($0.10) and a can of Pepsi ($0.25) the taxes were less than a penny. The retailer would eat the tax burden right?
Wrong! Each county would print its own partial cent currency… called ‘mills”. One mill was $0.001. I always had mills in my pocket when I pedaled my bike to the local mom & pop general store! (In 1965, our county ended the practice of recognizing mills as currency. My dad took his coffee can of mills to the county courthouse and cashed them in for US currency… during the buy back period.) But, you still can’t round up tax charges!
The second reason… retailers, gas pump manufacturers, sign makers had already adopted the 9/10 into their way of life. And, strangely so did consumers. (Prime example: diesel at $3.999 is for all practical purposes $4. But, you can actually say you are paying under four bucks a gallon.).
It has become a way of life… that no one wants to change. Retailers want the price to appear lower than it is… as for politicians & consumers… they don’t want the price rolled up… even if it’s one tenth of one red cent!
Obscure fact: old cash registers had a slot in their tray for mills. That layout is still used in most full sized retail registers.
Cap’n… here’s some advice… save your mills… they may still be valid currency in your county. And, go ahead, get your Realtor license… I have a feeling the Ponderosa is gonna sell and you’ll want to collect your fair share!
Leave it to you and thanks!!! Only YOU would know this stuff cuz you're smart (age has nothing to do with it!) I been a 'moderator' of an autobody site 24yrs next month. I will be posting what you were so kind to provide AND I'll tell all where I got it from as well. Have a sparkling day!
@@sonnyblazer5504 LOL… it helped growing up as poor farmers in a small town… we used it o pick up pop bottles on our way to the store. With double-bubble gum at a penny a piece… the 2 cents each on the refund was a veritable gold mine!
Simpler times… happy days!
@@sassafrasvalley1939 You're a good man "SV"!
Wa boom grindy grindy IS a technical time. I looked it up.
Each grindy is an incremental indicator on the expense of the repair.
Thanks Mike
Yeah that's right!
@@CaptainKleeman Supposed to have been term not time. I should have proofread it closer.
A very good invention these Speed Binders
and a fairly easy solution. It's strange that they did not come long ago.
Probably needed cordless power tool tech to get good and cheap enough to make them worthwhile, at least in part.
@@spudgamer6049 U got that right.
Thank you and have a great day.
You as well!
Speed binders should recess the grease fittings so the fittings would last longer. Which would mean the binder would stay greased better. That first binder you were working on was very dry and dirty inside. I assume because of the broken grease fitting.
Their new model has protective collars around the zerks, if you notice in the video, several of them have that on there
Nice to see a good tool that you can get replacement/maintenance kit for. I’m tired of the throw away products.
Agree, love that we can rebuild them
Nice video great explanation on the speed binders, thanks for sharing, and in Australia fuel is $1.98 per litre so thats 4x$1.98 to a gallon.
I chuckle whenever people here in the US complain about fuel prices because I know most of the rest of the world has to pay by the liter and it always comes a lot more than what we pay.
Neat rebuild on n what looks like an old screwell slack adjuster.
That aside , awesome video on how to k÷p a fleet running
Good Sunday morning with my coffee and Kleeman. 😊Dirt Perfect has names for You guys, Man behind the scenes, Mr. Millenial . I think You should be called Mr. Maintenance !
Lol clever
I love the sound of that Mack.
💪
Very informative. Thank's Mike :-)
Thanks Ed!
Thanks for sharing your thoughts, ideas and videos. Always liked the speed binders. After first seeing them on DP’s or your channel I later saw a video of someone walking thru trade show. One of the interesting products was a radio transponder chip that could be built into hand tools and provide tracking and statistics of the tool to the user on their cellular phone 📱. I thought then and still do that if a person could develop a load cell into a chain link connected to an app via a chip as these guys were selling you would have a gold mine. I thought it would be a natural enhancement to be added to the speed binders since they are already an improvement. With the things I thinking of, you could have an app that monitors your load securement dynamically, provide a documentation trail for transit that everything was secured while transported and an alert if a load needs attention. Tried suggesting it to the speed binder people however got no response. 😂. Thanks for reading my nonsense, always enjoy your videos. Wishing you and your family the best.
Now that would be awesome! And an alert that goes off when a chain becomes loose! That would be pretty dang cool
So waboom grindy, grindy is translation to Kleeman's new repair channel in Mike's shop??? Good luck bud. To quote someone I know...."It'll be fine, just fine"
Thx for the video….I learned that these barriers are largely reuse of heavy loads of concrete that otherwise gets wasted
Great video Mike! Enjoyed it.
Thank you!
Binders are a life saver great video 👍
Thank you!
Great video and a good day
Thank you sir!
All so if your a Dump truck hauler of bulk SALT to these city or county yards. We used private haulers for are delivery. Use ( Fluid Film) spray on all areas of salt contact when dumping. You don't need your nice personal Dump truck. Owner operator, to have corrosion start, for those SALT loads you haul. It will help in long run. That corrosion will creep on any metal on your back end of dump. Start have corrosion issues with electric light connectors. Lift hinges. Please use the film if you haul bulk SALT.
I’ve pondered these speed binders for a while. I’m not liking that there’s this much maintenance required. With normal ratchet ones, I just keep em lubed and move on with my life
There’s something this video made me realize.
There are 2 things you did that I’ve never seen Mike do, with one exception. Except for a (by the book) video Mike did with Officer Hoover quite a while ago, I’ve never seen him shovel out tracks or sweep off a trailer. Now, I’m not saying he doesn’t do it but, he also doesn’t make a point of saying he does it either and, I’m only going by what I see in his videos.
I can’t remember which video it was but, I got a not so nice reply to a comment I made on one of his videos concerning you. He was showing some tracked equipment of his (I forgot which. 120 probably) and I made the comment that you must have been the last one who used it/loaded it because the tracks had been shoveled clean. He did NOT appreciate that one bit 🤣
Great video Mike 🇺🇲
Thomas!
from the Netherlands thanks for the video Captain Kleeman
Mornin Mike.
Good morning!
Two years already???? You are making us feel older Mike 😱🤣
They have certainly earned their keep, wonder how many times they paid for themselves?
Boom boom grind, think it may be time for the car to visit Dr. Car ..... 😬
Enjoy you time off from work, to do more work !!! 😉💪
Thanks Alex!
Thanks Mike!
When you said 3.99/gallon I thought "those were the good old days"
3:48 "WE DODO ...!!!!"" WE HHERD IT!!! LOL HAHAHAHAHAHAHAAHAH
nice thing is with the speed binders you can use a ratchet and socket if your batteries are dead great video those blocks are far more expensive here
Exactly
Oh ya I now see you already have some that do have a piece of pipe protecting the fitting
Yeah. So speed binders sell a collar that protect the zerks, I thought he had some in the shop. Going to have to get some more ordered
Wow I haven't seen a Ponderosa Steak House in decades. 😮😀 Boom grindy grindy?😬
Awesome job Mike
Thank you!
Interesting video,something different 👍👍👍😎😎😎
Hey appreciate ya watching!
Good video my friend !!!! Thank you !!! ❤️😎
Thanks for watching!
I see I'm not alone in having two different lengths of chain on the trailer. (Too long and too short.)
It's a toxic trait lol
Great video 👍
Thanks Bobby!
Hey captain great video how do you like the rebuilt trailer Clint did them u bolts look real bad good thing Dp got them fixed you may have gotten the blame for them if they broke 😂😂😂😂.brake good? keep up the great work 👌👍😎✌️🇺🇲
Trailer turned out awesome! They did a great job
You said "doo doo"! 🤣🤣🤣❤
Boom Boom Grindy Grindy is normal sounds from a Subaru isn't it?
I'm glad you mentioned why you had more vehicles parked at DP's yard than you did at home. Curiosity and cats, you know. 🤷♂
I figured someone would ask
Hey I noticed you had to replace a broken grease fitting some actually come with but if you cut a piece of pipe big enough you can weld it around the fitting just tall enough and big around enough it will protect the fitting other wise they stick out and will get broke off all the time
Like the video Mike .
Thanks Leo!
We have been buying some concrete waste blocks here because of the price increase coming. I figure I may as well make that extra 20 bucks myself. Plus the markup we charge for each one also. Gotta keep a float or our companies will sink right? But now being as it's Farmer Chris we are working for here we gotta pass savings to him too as much work as we do for him each year. You all know what I mean when I say " Farmer Chris" ....
Another good video.
Speed binders are alot faster then the ratchet style binders, But the Lever load chain binder that type is not high on my list.
Most problem i have with the speedbinders that they knock of my grease nippel its a good thing that they sell a protection thingi for that, but made my own.
This concreat don't need edge protection but i have some Protection Pads for some stuff but it depend on what stuff you haul.
But if you use lashing straps , edge protection is golden.
Fuel here is 7.7usd per gallon
Pulling th pins i use " Welding Locking Pliers " and Flat Head Pry Bar / if that dont work i clap it in the press/ bench vise and use a prybar... Have not had to weld yet so i'm lucky on that end
I go from 1-11. Tires if wasting time stepping up the size of the lever lol
Not waboom grindy grindy? That's bad! Grindy grindy baboom isn't so bad but rattle rattle is the best of the bunch.
After converting everything over we pay the equivalent of about $9.20 per gallon here in the UK right now.
another great video, as always really enjoy your video's.
those speed binders are pretty cool
They are definitely handy