Let me just say I found another way to cause e15. Clogged kitchen sinks and I forgot to clamp the dishwasher drain hose. Plunging away it backed up in my dishwasher. I looked at many videos. I had to clean a p trap and snake a drain and fix my self created e 15. Your video is the absolute best, the most detailed with things I need to know such as, how to pop something off where to stick the screwdriver to remove the switch sensor and lifting the bar to get the float out. I did it all confidently in my kitchen floor. Thank you!
Incredibly helpful! I have Bosch shpm78w56n/01 that displayed an E15. While the error cleared, a couple of days later, the entire panel went dark. You could only hear the beep from the on/off button, nothing else would light up. I followed your instructions and sure enough, the float was tripped. The short, we'd had a clogged sink, plunged it, it back fed water into the dishwasher, and must have leaked out a hose. It was only a small amount of water too. I dried everything up and all is well now!
I've been watching a lot of your Bosch videos and they are all well done! However, on my model I have easy access to the float on the left by simply pulling out the unit & lifting up the insulation (no need to disassemble the door & front panel). In fact, this video is recorded through the access I'm talking about at 4:02.
Our videos are generic videos to give you an idea on how to do the repair. It is possible the repair could be slightly different depending on your model.
so the question i have is if water is being detected in the base is it not leaking from somewhere else where maybe it shouldn't be? I would think that if your safety float has failed there is multiple issues going on.
Good video. My question is, why would you need to replace the float? I got an Error 15 and then an Error 23. I can see there was water in float area (and outside it). I've replaced the drain pump but how do I know if I need to replace the float (or the switch/sensor)? TIA.
Let me just say I found another way to cause e15. Clogged kitchen sinks and I forgot to clamp the dishwasher drain hose. Plunging away it backed up in my dishwasher. I looked at many videos. I had to clean a p trap and snake a drain and fix my self created e 15. Your video is the absolute best, the most detailed with things I need to know such as, how to pop something off where to stick the screwdriver to remove the switch sensor and lifting the bar to get the float out. I did it all confidently in my kitchen floor. Thank you!
You are welcome. Glad you were able to complete your repair. If there is anything we can help you with in the future please let us know.
Incredibly helpful! I have Bosch shpm78w56n/01 that displayed an E15. While the error cleared, a couple of days later, the entire panel went dark. You could only hear the beep from the on/off button, nothing else would light up. I followed your instructions and sure enough, the float was tripped. The short, we'd had a clogged sink, plunged it, it back fed water into the dishwasher, and must have leaked out a hose. It was only a small amount of water too. I dried everything up and all is well now!
I've been watching a lot of your Bosch videos and they are all well done! However, on my model I have easy access to the float on the left by simply pulling out the unit & lifting up the insulation (no need to disassemble the door & front panel). In fact, this video is recorded through the access I'm talking about at 4:02.
Our videos are generic videos to give you an idea on how to do the repair. It is possible the repair could be slightly different depending on your model.
so the question i have is if water is being detected in the base is it not leaking from somewhere else where maybe it shouldn't be? I would think that if your safety float has failed there is multiple issues going on.
Good video. My question is, why would you need to replace the float? I got an Error 15 and then an Error 23. I can see there was water in float area (and outside it). I've replaced the drain pump but how do I know if I need to replace the float (or the switch/sensor)? TIA.
Jou block play