How To Use Bleach For Pressure Washing - Everything You Need To Know

✅ How To Wash Course: bit.ly/HowToWash101
🔥 Full Video: • The Best Chemicals For...
🚨 𝐒𝐀𝐕𝐄 𝟓𝟎% on 𝙌𝙪𝙤𝙩𝙚𝙄𝙌 👉 myquoteiq.com

[@ForeverSelfEmployed]

✅ How To Wash Course: bit.ly/HowToWash101
🔥 Full Video: ruclips.net/video/P-YlI3jXI9E/видео.html
🚨 𝐒𝐀𝐕𝐄 𝟓𝟎% on 𝙌𝙪𝙤𝙩𝙚𝙄𝙌 👉 myquoteiq.com

[@drwhowhogrub3908]

Hey thanks for the videos and information. Any recommendations on equipment for spraying bleach as I use brass quick connects and it breaks it down very fast

[@CLCE2077]

Hello @Foreverselfemployed
I have a pressure washer what makes a max flow rate of 10L per minute (2.64gal) and the surface cleaner needs minimum flow rate of 11L per minute (2.90gal) what should I do?
Note in Australia
Thanks

[@mikeirving1468]

Do you have a recommendation for best home owner pressure washer or soft washer to mix bleach with? Just trying to do my house.

[@Tommy-rf9sw]

Can you put the bleach and water mixture inside of the soap dispenser of the pressure washer? Or will it ruin the pipes/connections?

[@Brittvanegas]

Nothing beats totally awesome from the dollar store.

[@tristianantwanmann4694]

So I can just use awesome

[@kennyjwislon1]

@@tristianantwanmann4694make sure you cut it down. It will damage stuff quickly if not used correctly.

[@esteBAM979]

A question I feel never gets discussed is, how many gallon of batch mix do make based off of square footage when using a simple soft wash pump setup? So say I am washing 100sqft vs 1000sqft. I can figure the strength of the mix on quote IQ just fine. But how do I know how many gallons of product it will take? I don't want to overshoot it and waste a ton of product or undershoot it and have to unnecessarily mix more in the middle of the job if I could have mixed it all on the first go around. Would be nice to know if there was a calculator for something like this. Or even a math equation

[@samestrada6221]

That’s my question too

[@omarshaabna9509]

So i have a 26 gallon chem tank with automatic 5.5 psi pumper. Now when i do a roof wash i would normally use around 5% SH as a target. Now when i get to the siding. Do i have to drain the tank completely if i only have one? Because the house siding would only need 2 percent. Or do i not fill up the entire 26 gallon chem tank and then when i move to the next service for the same house i just add more water to dilute it again without draining? Prolly a stupid comment sense answer but still gotta ask haha

[@deadly_ufa0783]

So we’re in copper

[@Landiiii]

hey why did QuoteIQ send 2 of each email

[@agardner1505]

I always use Brenntag over Univar. And they will refer you to someone local if you’re volume isn’t high enough. They’re larger than Univar and much better service & price. 😊

[@luckythecat7663]

Svp les français c'est quoi l'équivalent en France ? Du chlore ? De la javel ? J'y comprend rien :(

[@matthewlatham3703]

Your QuoteIQ link is down.

[@luckythecat7663]

Someone can resume please ?...

[@kelanrich8108]

I've been seeing horror stories about bleach ruining peoples washers, is there a way to avoid damage or failure to your gear when using bleach?

[@whatchance]

Just use a spray pump, it may be longer but it’s easy and safe.

[@naseerahmadnisar739]

its crazy though every video i watch is someone has spray and spraying that a kid can do to no one shows how they get that bleach to that hose where did you put the bleach is you show the machine 😕

[@Robnord1]

see videos on 'soft wash bleach pump'.

[@naseerahmadnisar739]

@@Robnord1 thank you sir

[@wheredahos1164]

Nice video

[@ForeverSelfEmployed]

Thanks for watching

[@AndyLunatic]

Anybody in California use bleach?

[@CookingwithWyatt]

I’m from call

[@bizzzzzzle]

I work at a Wastewater plant, we get deliveries of extremely high concentrations.

[@ForeverSelfEmployed]

I bet