Just bought my very first bow. All I knew is I wanted a fall away rest limb driving. My local shop set me up with the Hunter pro. Loving it and everything I've read and saw about has made me smile. Thank you for a fabulous product.
Just purchased the Hamskea Trinity. Liked it so much I put it on my back up bow as well. I had been using the QAD cable driven. really liking the Limb driven
The mounting set screw on my Trinity is not tipped in plastic, so the resulting metal-on-metal contact leaves a nasty circular gash as it digs into the anodized finish of my bow riser. My outgoing Spot Hogg blade rest has a set screw that's padded which doesn't leave any scar or mark at all. The instruction also says to add spacers under the blade angle screws to set the desired blade angle, but none are provided.
If you guys do the dove tail mount like the qad integrate you would have the ultimate rest. That is If they don’t have a patent on it or something. That would be unfortunate because I would love to see that added to this years model.
QAD has the patent on it, no other rest manufacturer can legally se that mounting system unfortunately, I wish Vapor Trail could do that as well...sadly it won't happen any time soon
@@Smoothy38 They blew It with there rest that slides to the side out of the way. Should have stayed with a drop down and built full containment I would buy them np. Really you think target archers or hunters are ever going to a drop to the side rest I don't think so..
I know this is an old comment but just fyi, I swapped out my QAD integrate for the new COR universal mount epsilon and it's just as low profile as an integrated. With the Epsilon they've knocked it so far out of the park other manufacturers might have to just hang it up lol.
Hello, I have the hybrid hunter pro and I've been getting left side vane contact using small diameter shafts with blazer vanes. They should pass throught fine but the evidence on my vanes are clear. I've brought my bow to my pro shop and I was still getting contact after they tuned it. I've temporarily solved this by turning my cock vane to the 11 o'clock position which seems to help. Was wondering if the trinity containment cage has a wider width so I can change switch them out. Thanks.
I'm a person who shoots a vapor trail going to yours now why lighter 4.0oz ,I wish It was even more work on that some more, full containment.Drop down like a target sight you people listened, In fact both of my hunting bows will have them this year unless they don't work well. I have not heard anything bad but the with of the blades come In contact with some bow frames that curve next to the frame of bow easy fix what I saw or even a adjustment.I still think there bullet proof and a winner to have on your bow....
Nice video, the rests look innovative and well thought out, however, you need to pronounce one tiny little repetitive word correctly!"Accuracy is pronounced "Accc-Qraaaceey",not "Akraceeey", very painful on the ears
Just found this channel. Love the no nonsense explanations. He speaks quickly but not too quickly. Subscribed.
Just bought my very first bow. All I knew is I wanted a fall away rest limb driving. My local shop set me up with the Hunter pro. Loving it and everything I've read and saw about has made me smile. Thank you for a fabulous product.
Just purchased the Hamskea Trinity. Liked it so much I put it on my back up bow as well. I had been using the QAD cable driven. really liking the Limb driven
Thank God you guys made a video for this, helps a ton with the decisiveness
The mounting set screw on my Trinity is not tipped in plastic, so the resulting metal-on-metal contact leaves a nasty circular gash as it digs into the anodized finish of my bow riser. My outgoing Spot Hogg blade rest has a set screw that's padded which doesn't leave any scar or mark at all.
The instruction also says to add spacers under the blade angle screws to set the desired blade angle, but none are provided.
If you guys do the dove tail mount like the qad integrate you would have the ultimate rest. That is If they don’t have a patent on it or something. That would be unfortunate because I would love to see that added to this years model.
QAD has the patent on it, no other rest manufacturer can legally se that mounting system unfortunately, I wish Vapor Trail could do that as well...sadly it won't happen any time soon
@@Smoothy38 They blew It with there rest that slides to the side out of the way. Should have stayed with a drop down and built full containment I would buy them np. Really you think target archers or hunters are ever going to a drop to the side rest I don't think so..
Will all the rests on your website fit the Primer rest?
is the trinity mounting bracket interchangeable with the primer
Which rest can be used as a target non-drop away rest?
I wish that I would have watched this video before ordering the Primer instead of the Hybrid for an additional $30.
Considering switching to the Trinity for my RX5 but would like to know if y’all have anything in the works for an integrated version. Great video!
I know this is an old comment but just fyi, I swapped out my QAD integrate for the new COR universal mount epsilon and it's just as low profile as an integrated. With the Epsilon they've knocked it so far out of the park other manufacturers might have to just hang it up lol.
Hello, I have the hybrid hunter pro and I've been getting left side vane contact using small diameter shafts with blazer vanes. They should pass throught fine but the evidence on my vanes are clear. I've brought my bow to my pro shop and I was still getting contact after they tuned it. I've temporarily solved this by turning my cock vane to the 11 o'clock position which seems to help. Was wondering if the trinity containment cage has a wider width so I can change switch them out. Thanks.
Hello. The containment bracket for the Trinity and Hybrid has the exact same width.
Where can I get the over molded stainless steel blade for my versa rest?
We have those available on our website.
Happy user since versarest era.
How many time he repeat repeatable
I hate you. Why do you make so many great rests? Hard to pick one. I have look at a lot of rests and hands down you are the best. Help which one.
I thought the Trinity came with a molded launcher mine came with felt
What about the epsilon
This video came out 2 years ago
I'm a person who shoots a vapor trail going to yours now why lighter 4.0oz ,I wish It was even more work on that some more, full containment.Drop down like a target sight you people listened, In fact both of my hunting bows will have them this year unless they don't work well. I have not heard anything bad but the with of the blades come In contact with some bow frames that curve next to the frame of bow easy fix what I saw or even a adjustment.I still think there bullet proof and a winner to have on your bow....
My trinity hunter pro is awesome
Nice Pen !!!
Nice video, the rests look innovative and well thought out, however, you need to pronounce one tiny little repetitive word correctly!"Accuracy is pronounced "Accc-Qraaaceey",not "Akraceeey", very painful on the ears