How To Fix A Briggs Plastic Tank-Mounted Carburetor on a Pushmower
HTML-код
- Опубликовано: 23 июл 2024
- In "Slippers Hijacks The How-To", Local shop pest Slippers stops in wanting to film his own video and ends up taking over Taryl's operation and showing you how to properly fix your non-running and/or leaking Briggs and Stratton plastic tank-mounted carburetor. Slippers has a little trick to fix the carb when it's leaking at the base of the carb where it mounts to the gas tank. Another funny and informative how-to video from your pals at Grass Rats Garage! And There's Your Dinner!!
#carburetor #smallenginerepair #slippers #tarylfixesall #grassratsgarage
Pick up all your TARYL APPAREL here: www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE Taryl on FACEBOOK! / tarylfixesall
He's on INSTAGRAM too postin' daily @tarylfixesall Хобби
Another top quality Kerwin P. Slippers repair. Done right the first time, everytime.
I file the back corners of the carb until a straight edge reveals the warpage is bare minimum. Then reinstall with new diaphragm and one gasket. Had good success with it. Thanks for your videos. Both informative and entertaining.
How could you not like these videos.....they are informative and hilarious at the same time
Because a lot of people have no since of humor anymore I love these guys and love the fact they live in my state
Thanks Slippers and Taryl. Not sure I like watching all the antics when I just want to fix my mower but you did help. I watched several videos on these carbs 'running too rich', 'lumpy throttle control', sooting up spark plug, 'fuel leaking', 'not sucking up fuel unless tank more than half full', 'primer bulb not sucking fuel' etc. My mower was doing all of these things. I started off cleaning the carb with carb spray and changing the diaphragm and gasket for a non genuine version off ebay. This may have made it a little worse. Making a sandwich with the diaphragm between two gaskets made minimal difference. The problem was these plastic carbs are prone to distorting with heat and time making the surface that contacts the gasket uneven. I tried flattening it a bit with a sharpening stone and that did not help. Finally using the carburettor replacement fixed all the problems. If your carburettor is distorted get a Briggs and Stratton genuine replacement. They are not expensive as Slippers said - cant always get away with gasket replacement alone. Cheers
Dude, I’ve tried forever to get that throttle plate out. You’re the first video to show me how. Thank you!
New take on things this week, grass rats are all working together for the greater good. Very nice. Taryl now you know who to call when you need a break sometimes.lots of ham’s to you.cheers 🍺
Thank you. Your video helped me get my lawn mower running like a new machine. Thanks from California
First time to your channel. When I first started watching I felt I was not going to find the information I was looking for but I continued to watch because I've been working on this lawn mower for days and would not run. After doing exactly what you said. I had success. My mower is running better than last year. Thank you and keep up the good work. I will definitely be subscribing.
I've done a few of these plastic carb rebuilds. I'm always amazed by how many people will throw away a mower that won't start or surges when it runs. As this video demonstrates it is pretty easy to service the intake on these cheapo mowers. Of course if you follow proper maintenance and fueling then these usually run just fine without too much fussing.
Hahahaha love the end “Pull this throttle plate out”. “Pull this throttle plate out.” You guys are awesome
Great video. The double gasket trick is just what I needed to learn to stop my mower from leaking at the base of the carburetor.
This video came at a good time I just got 2 of those mowers free and that's what's wrong with them so as always y'all are appreciate here in south Carolina
Always fun watching these videos and learning what you have to share. Thanks!
You guys crack me up! And I get to learn something! What a combo! Thanks!
Good job, Slippers! Taryl, you are getting some heavy competition there! If he learns that it is a carbitrator, he will be tough to beat!
Watched your video and did this to my lawnmower today. Started 1st pull! Thanks for sharing
thank you so much I couldn't figure out where it was leaking and I decided that gasket was the problem so I went and got a new one, shew saved me from having to take it apart again, first video I came to .. sure glad I did...
You are right - it is required to hoot, holler, and dance when it is finally fixed. I do that every time I fix one of my mowers now. Thanks, Taryl!
So glad I discovered this channel!
Slippers is awesome. Wish I could’ve watched this morning but doing some remodeling
If Slippers can do it, anyone can. It’s just that easy! lol Good job guys.
Taryl,I can't believe you threw slippers out like that man,he really knows his stuff!!!.You really should hire him at least part time around the shop,I didn't think he knew anything about Briggs/Scrappen carbirtraitors.
Good job Slippers! Happy for you the job turned out well with Taryl lookin' on!
This is an excellent 'how to' video. My WeedEater with Briggs and Stratton starts but won't run. I needed to know how to take things apart and you sure showed me. I'm not quite strong enough to loosen some screws so I'm waiting on the right tools from a neighbor - but then I will tackle it.
Great job Slippers!
I love it. Good job Slippers
Well done slippers. You too Taryl.
This is *the most comprehensive video* on this particular carb.
Good job Slippers!!!!!
Slippers must have gone to lawn mower repair night school, since the last time I saw him. Well done! Now you need to give him a bigger breakfast, so he can get that throttle plate out first time.
Slippers is smart... lol you should include him in more fixes there’s your supper lol got me rolling on the floor 👍🏻
Taryl is the best!!
It's fun to see because I recently did it myself!
GOOD JOB Slippers !!!!
Dang!!! Slippers got mad skillz yo! He even got the repair dance down!
Skillz? Its a basic plastic carb
You have to be kidding me haha, My pressure washer started acting up and it's the same carbutrator! Will dive into it later on today!
Good work
Great Job Slippers Hope to see you do more videos...
Hello. You have been a great help to me!
Awesome video! I currently have that issue on a 2012 4.5
You taught him well!
Great video and very entertaining too. Thanks ... from England 😊
Hey Taryl Slippers did a great job
Great Job Slippers
Slippers..,The Man, The Myth, The Legend.
Great job I actually learned something new
FIXED MY PROBLEM...THANKS FELLAS
And there’s your supper excellent tutorial
Good video. Nice to see Slippers do something right. Also, nice to see someone clean the carb and tank on that old BS engine before working on it. Thanks for another great one.
Nice job, Slips!
Love yer vids . You guys are something else.
You really gotta watch out for slippers. But you did train him right. Good job. 👍👍👍❤️
Good job Slippers!
You were lucky there Slippers. I started one with that carb on and like you I’d put the air cleaner gasket on the top. When I started it the gasket got sucked straight out. It went down the carb into the engine and straight out of the exhaust in bits.
Good job slippers. i always doubled up the paper gaskets but not sandwiched like you slippers. im gonna try that next time
Slippers is really good at this lol
We definitely need more slippers videos working on equipment
Please don't let slipper do anymore carburetor reveals cannot stand here that man talk
I do a dance when my repair works and my neighbors think I'm nuts..... LMAO..... Slippers did a great job, but I think fluffy the rat helped him..Hahahahaha
Me too a shout, a song, and a dance! My neighbors laugh, they KNOW I am just excited that I got another one going!
*Slipped up on three (3) sleeping Briggs today SlipDogg!* MowFather! Because of yours and other's videos lawnmowers all ran--and with their old gaskets I went at the small holes in the jets with a bread tie that I stripped............
Good job Slippers
Thanks for this video. I have exact same mower. It now runs great.
Please get this man to do a Mathew NcCaughnah impression. Not dude with big teeth. The dude that rebuilt carb
Nice job slippers as always....
Could only imagine what my neighbors think of me hooting and hollering. I already say carbutraitor, muffkin, Briggs and scratton lol I don’t own a tecumesh though..
I'm pretty sure the phrase is "breaks and scrap'em"
Wish I knew Make and Model of this Lawn Mower. I have the same one, and need to order the springs attached to carburetor / gas tank.
Good job slippers!!!!!!!
Good job Slip
Thanks for tip on adding another gasket
Good demo.
From one garage band warrior to another . . . COOL MUSIC DUDES!
great how-to video Taryl and Jr!! took apart my similae Pusa? tank and carb, as my push mower would start, but not stay running. the carb wasnt too dirty - some minor junk, dirt, etc - but the real probl;em was water in the tank! i still cleaned the carb, replaced the thimble screen, gaskets/pump, and spring. the small thimble screen was hard to get on. did you put a drop of oil to help it slide over the tube? Thanks!! also, if you took a regular sponge, cut it to shape so it would fit the holder, would that work for a new filter (instead of the overpriced "Genuine" one)?
I liked the very end!! LOL
Good job slippers
WOW! Dinner and Supper in one video!
“Briggs and scrapum” 🤣
good job Slipper
Great job, Kyle! :D
,,,,Timmy
Ha ha ha...loved it!!!! Great job guys, had some good laughs!!!
Hilarious and instructive!!
Dad gum !!!! Slippers actually knows what he's doing....throw him over the fence anyway....lol....there's your dinner ....Taryl...
LMAO, informative yet hilarious. Thanks!
Slippers!!! You know engines??? Too funny!
Slippers-Fixes-All
ulitepilot aka Zombie Dave
Briggs&Stratton 148cc runs off of the initial prime then dies. Replaced the tank/carb assembly and have same problem. Any suggestions?
I got a mower just like that I replaced the primer bulb and now it runs for 5 min than dies primer bulb is collapse in sucked together I let it sit and primer bulb goes back to original shape and starts up and runs for 5min and dies what do you think it might be ? thank you love your video
Slippers got skills!!!!
I need some of the Phillips head screws connecting the carb to the tank - what size am I looking for? Cheers
A skit and the video all put in one... Great Idea ~!~!
Plus Tard Mon Ami ~!~!
THANKS, Now I can clean mine and get it going.
I just done a D And G but the mower is still hunting I'm gunner try getting that main jet out and clean it up hopefully that fixes the problem 😁
Slippers is a genius
So, the reason I watch your videos is in case I forgot something. In this case, the screen would not come off and so you helped remind me of what I forgot, which was to clean the main nozzle.
Great, Slippers taught me how to take out the main jet. Now I can finally clean my car bu traitor!
HELP!!! I have a kohler command 15 hp that clicks/rattles when its off and i spin the flywheel by hand and it dousnt sound like its in the case
Do you have a video on changing Hydra gear oil on exmark quest ?
Lmao I love the skits
I love taryl lol
Where can i get the paper gaskets for it that’s what i did to my but didn’t start
Slippers did well 👌🏻
Nice repair Slippers. My mower didn't come with a nice fluffy mouse nest. Do you know the Sten's' part number for a replacement?
Doubling up my paper gasket and sandwiching the diaphragm was the fix I needed! Was leaking fuel at the carb/tank interface. There's my dinner!