Bathurst Race Day Holden HOT Six Build Compilation

Поделиться
HTML-код
  • Опубликовано: 3 янв 2025

Комментарии • 22

  • @stevemcintyre4398
    @stevemcintyre4398 2 года назад

    Nice work. Sounds strong as , should be a stout little performer. Good to see a bit of old school building and tuning. For some reason being Bathurst weekend, I can picture triple SU's, dunno why though...

    • @KamicarzCreations
      @KamicarzCreations  2 года назад +1

      Thanks Steve, it shoud quieten down with a full exhaust :-)......Im planning on selling the car when its all back together but it would be good with a Modern injected Carb like a Holley Sniper

  • @jesstill7833
    @jesstill7833 7 месяцев назад

    I had a pretty tough 186 in the early 70 s12 port head Bert Jones 40. 80 cam triple S U 4 speed 12,,to pistons good egnition it ran at castle reach 14..50 at 109 miles per hour ,,,that was my pride and joy

    • @KamicarzCreations
      @KamicarzCreations  7 месяцев назад +1

      Sound like a beast. I still have a Big 202 in build with a lot of technology integration.....its been on the back burner for a while though :-)

    • @jesstill7833
      @jesstill7833 7 месяцев назад

      @@KamicarzCreations Hope you get on the project soon as sounds interesting I hope it screams low 11 s 123 mph

  • @michaelnoyes4817
    @michaelnoyes4817 2 года назад +1

    The thing that does my OCD in is the blue plug leads

  • @aphil4581
    @aphil4581 2 года назад

    Don't know what your using for a filter element in the air cleaner but when tested that type flowed worst in a lot of tests. I had one myself way back and loved the look of them.

  • @metalhead140
    @metalhead140 6 месяцев назад +1

    I'm a bit confused... What happened to all the trick bits from the earlier videos?

    • @KamicarzCreations
      @KamicarzCreations  6 месяцев назад

      The cool gear still exists for my 202 build into my LH Torana build. The UC engine was built back basically standard for registration to sell.

    • @metalhead140
      @metalhead140 6 месяцев назад

      @@KamicarzCreations awesome. I went through a couple of your other videos last night and gathered that was probably the case!

  • @christophercullen4889
    @christophercullen4889 2 года назад +1

    Did the cam survive the start up.

  • @LeftyLethbridge
    @LeftyLethbridge Месяц назад

    What cam is in it

  • @gav6808
    @gav6808 Год назад

    Is that a 350 holley? It if it is size 92 jets are good for 6s.

  • @samjohnson4014
    @samjohnson4014 8 месяцев назад

    There are at least ten more mods you could do for this build. Cheaply at home and make hp.

    • @KamicarzCreations
      @KamicarzCreations  8 месяцев назад

      You will see in future videos that it went through many iterations :-) Building a beast motor now for the supercharger setup

  • @andyjames2082
    @andyjames2082 2 года назад +1

    👍🇦🇺