In this video im doing an overview of my sim racing rig, i have upgraded my next level racing GT Lite with an upgrade i dont think ive seen anyone else do.
I actually stopped playing sims cause after buying this one it was so uncofrtable, my butt starts to fall asleep and it just feels like I'm slipping off, a how to video of chaning the seat would be amazing
That is a fact!! I do plan on doing a 3d printed know for the weight! I feel with a shorter shaft and less weight it will feel similar to a short shifter. I did do a mod to the shifter as well to make it feel alot better!
I could never drift on CarX with my old Thrustmaster TMX (T150) so I just used a controller until I upgraded to a Thrustmaster TX (T300) and it almost feels as good as drifting in Assetto Corsa.
I used the side strap to get my seat to position I needed. I wish they had the strap on both sides cause it would cause a slight twist in beck depending how I movec
It's actually one of the bars from the back of the seat. It just fits perfectly in the mount that the shifter goes in. And I attached the tablet holder to the top of it. It removes really easily and is adjustable
@@hdycreator Nice tip. I thought too on cell phone holder for bikes tô attach on the left, near to steering Wheel... Left side on shifter place I thought to put a keyboard and mouse support. Thanks, your vídeo has opened my mind.
I only had to drill out the rivets on the arms that held the back of the stock seat. Goal was to make it possible to put it back to stock if I ever needed to
I actually stopped playing sims cause after buying this one it was so uncofrtable, my butt starts to fall asleep and it just feels like I'm slipping off, a how to video of chaning the seat would be amazing
this review sounded good in my left ear
You know what they say.... it is what it is
Love the content just subbed i'm trying to get into sim racing just jot to wait till Christmas. so keep it up man
Do you think you could do a video on how you installed the seat?
This is great setup you should be proud.
Thank you! Still could use some work in some areas, but it works well for what it is!
Facts
for a better working shifter, lower the knob as lower as possible, in your case is too high and weights too much
That is a fact!! I do plan on doing a 3d printed know for the weight! I feel with a shorter shaft and less weight it will feel similar to a short shifter. I did do a mod to the shifter as well to make it feel alot better!
@@hdycreator Lemme know if u feel any difference :D
I could never drift on CarX with my old Thrustmaster TMX (T150) so I just used a controller until I upgraded to a Thrustmaster TX (T300) and it almost feels as good as drifting in Assetto Corsa.
Before u switched to the bride, were u ever able to get the stock seat to not recline so much, mine is leaned to far back.
I used the side strap to get my seat to position I needed. I wish they had the strap on both sides cause it would cause a slight twist in beck depending how I movec
its so good man keep it up it is a really good setup
Thanks! Still could use some upgrading!!
Can you do a video that just focuses on the seat mod? I can't quite see what you've done, but would love to do something similar
I am filming a rig update right now. And I will go into more detail about how I installed the seat!
@@hdycreator cool 😎
That seat is cool as hell what kind is it?? I have same cockpit and would absolutely love to do this.
It's a Bride replica I believe. It's branded Bride, but for the price I got it for no way is it genuine lol
Can you do detailed video on how you mounted the real car seat on it please I want to do this with my gt lite too
Yeah I can do a follow up on the rig with a bit more detail on the seat, and shifter handbrake position!
@@hdycreator a diy would be great only if you can because I really want to do this I have racing seat laying around
Install of seat vid ?
Just cool.
Thanks! A long way from finished, but for now it's working!!
i would recommened the screw mod for the logitech shifter makes it feel 100x better
nice and knotchy
Thanks I will definitely have to check that out!!! I hate the way the stock shifter is!
Recently I bought the same GT lite, whats the solution for the tablet's support? Thanks
It's actually one of the bars from the back of the seat. It just fits perfectly in the mount that the shifter goes in. And I attached the tablet holder to the top of it. It removes really easily and is adjustable
@@hdycreator Nice tip. I thought too on cell phone holder for bikes tô attach on the left, near to steering Wheel... Left side on shifter place I thought to put a keyboard and mouse support.
Thanks, your vídeo has opened my mind.
how did you mount your shifter i cant figure it out
It is farther to the right. It's only held onto the mount with one bolt which isn't ideal, but it makes enough room for the ebrake
For stiffer feel in shifter go to custom sim shop
I may have to lol. I was waiting for the moza shifter. Kinda bummed it doesn't support sequential as well as h pattern
So did you just cut off the tubes you didn’t need to mount seat?
I only had to drill out the rivets on the arms that held the back of the stock seat. Goal was to make it possible to put it back to stock if I ever needed to
@@hdycreator that’s cool I’m saving up for a seat now I’m gonna use your video as a reference to make mine. Thanks for the video.
Is the wheel not way too close?
Not at all! The wheel was a bit too low and close to my legs so I dropped the seat to give more space.
Bros force feedback is non existence with all that weight😅