His amazing skills made him ram the truck haha. I'm also a forklift driver and we load long cargo in shipping containers. Most professional way to do it is with an overhead crane in an open top container. Easy and safe both to load and unload.
God that cracked me up so much "AMAZING FORKLIFT SKILLS" Drivers entire mentality is just "Sometimes you're just too afraid" and drunkenly slamdunks that shit with full confidence into the back of the trailer.
My husband could do that with no problem. He has 40 years worth of forklift experience, plus top heavy duty equipment operator. Moved 80 feet gas and oil pipes
now that is something, the company that i work for can't have anything longer than 13m because of logistics. but i have seen crane operators move loads almost as long as their booms
baler johnson same. I hate unloading lumber like this. Very difficult and stressful. Lots of strabs and chain to pull it out. These guys got the easy part
@@Patfettx I have to admit I use my ears a lot when putting shit into racks. If I can't see the rack because the load is in the way. Just gingerly roll forward and wait for a clang. No damage done to the rack. Just don't do it on your test.
What's so amazing about this? I did this on a regular basis and didn't even need a backup truck, plz......come to the Caribbean and feast your eyes on skill
@@LaurieFloodTeacher unsafe no, unsafe for the product yes, the roll cage and weight of the forklift should keep the operators safe, I would only worry about people not on a lift, but they really shouldn't be anywhere near that, regardless, if you want to make it easy on the receiver, I makes of a product isn't destroyed, they should really send that load via flatbed
Boss man says it's going in the box truck one way or another, the forklift operator doesn't have much say, granted boss man's an idiot cuz he's probably have to pay a lot cuz he's replacing damaged freight
I do this all the time with a single forklift. At my shop we have some tall jack stands so place them a few feet from the end of the load while I reposition the tow motor to grab the end for the final push.
man in the red shirt standing in the wrong spot the load could've fell down on top of him. I have been driving forklift 25 years and say that is no good
Yeah, was waiting to see the amazing skills. This is something any forklift operator can do with practice. You can tell they have been loading this way for some time. Also.....the 2nd Forklift has 2 operators? lol Amazing skills for sure!
Not standard. Substandard this shit was abysmal, safety regulations left the building that's for damn sure. I mean did you hear his thump into the rear of that truck? Tall about not caring about load nor equipment
If i do that where im working my career is over lol + the only reason they showing their amazing skills to the world is because they are to poor to afford a proper loading dock lol
Not difficult at all. I have to unload heavy pallets from side of trucks while driving on a road at an angle with pot holes and bumps while driving said pallets up kerb. Just glad the forklift has extended forks.
They did a good job. I’ve been there and done that. They should have gotten a flat bed. The question is how are they going to unload it once it gets to it’s destination.
Loading takes 5 minutes. Unloading takes 5 hours.
5 hours lol
yea it gonna take time to unload
thesame procedure, but you need to use extension fork to upload it..
Fuck yeah
Not really. I'm a forklift driver and it's very simple actually
Looks like they take great care of their equipment
And you wonder why every box from Asia looks like its been run over by a tank.
Oh yeah? We're unloading american container's everyday you don't even need to mention that pls
Would like to see a video on how that container was off loaded.
His amazing skills made him ram the truck haha. I'm also a forklift driver and we load long cargo in shipping containers. Most professional way to do it is with an overhead crane in an open top container. Easy and safe both to load and unload.
0
Looks like this is a very basic operation in a part of the world where over head cranes are in short supply - you make do with what you've got here.
What's amazing is how hard he slams into the truck....
God that cracked me up so much "AMAZING FORKLIFT SKILLS" Drivers entire mentality is just "Sometimes you're just too afraid" and drunkenly slamdunks that shit with full confidence into the back of the trailer.
Amazing forklift skills?? Dude ran into the container lol! Amateurs
and he snapped one of the straps trying to push it up that things going to make a mess when its unloaded
That's true. I did it much better at my work. 25Tons of metal 11 time per day on trucks..
@@muddy_redneck4483 wweee ⛲⛲¥0 ())1!?..
Nate Nelson.. and they still need a crew of 7
fucken bang.
👍mantul smpe jeddah tutorial nya,salam kenal gays
Forklift helps worker do thier work more easier and faster.good job!
wih keren pak sopir.
pelan-pelan pak sopir, andalan pasti nih pak sopirnya
Oh yeah mad skill alright, safety and quality shipping and repairing the trailer not so much
My husband could do that with no problem. He has 40 years worth of forklift experience, plus top heavy duty equipment operator. Moved 80 feet gas and oil pipes
now that is something, the company that i work for can't have anything longer than 13m because of logistics. but i have seen crane operators move loads almost as long as their booms
I see this and think about the guys who have to figure out how to UNload it.
I thought the same thing..lol
I am the the guy who figures out how to load them and unload them ...I wish all mine were this easy.
baler johnson same. I hate unloading lumber like this. Very difficult and stressful. Lots of strabs and chain to pull it out. These guys got the easy part
open the doors, thread a rope between the bottom pellet tie it of to a post, truck take off forward, load comes out...unloaded in1/8 the time :-)
Paul Williams these guys got the easy part
I've worked at a lumber yard. They come out the same way. Lift it up and you put a steel pipe under the pile and pull it out.
Now I know why the front of those 20 foot containers are always bulged out!
this is normal to me. I've been driving for more than 16 years and best forklift driver in sg.
This must be part 1 of 2 because I know I saw the word "amazing" somewhere!
🤣🤣🤣🤣
Yeah they probably meant the people who had to unload that monstrosity
1:06
AMAZING FORKLIFT SKILLS lol
BANG!!!!!!
1:06
1:06
Guil I
Easy
Swamplord why don’t you go and try out?
it's called "ear assisted driving" When you hear the bangs and cracks, that's when you stop. Obviously it's derogatory.
@@Patfettx I have to admit I use my ears a lot when putting shit into racks. If I can't see the rack because the load is in the way. Just gingerly roll forward and wait for a clang. No damage done to the rack. Just don't do it on your test.
Jadi teringat masa masa jd oprt forklif .. love it .
Mnatab Betuk Tekhnik cara loding nya , pakai forklift 10 ton sama 4 ton kah Om qu dengan skills merbau decking
Damnn you hit the stuff so hard.. If my supervisor know i did like that he will fired me !
You even brush an OP into anything at Amazon, and you have to freeze the scene and send safety out.
What's so amazing about this? I did this on a regular basis and didn't even need a backup truck, plz......come to the Caribbean and feast your eyes on skill
I'll show you skills
Expert forklift drivers would never load that type of load into a container. First rule of thumb.
Yes, it looks like a flatbed was needed. It looked very unsafe.
@@LaurieFloodTeacher unsafe no, unsafe for the product yes, the roll cage and weight of the forklift should keep the operators safe, I would only worry about people not on a lift, but they really shouldn't be anywhere near that, regardless, if you want to make it easy on the receiver, I makes of a product isn't destroyed, they should really send that load via flatbed
Boss man says it's going in the box truck one way or another, the forklift operator doesn't have much say, granted boss man's an idiot cuz he's probably have to pay a lot cuz he's replacing damaged freight
Mantap bos ku salam dua garpu,,,🙏👍🏼
That’s easy ..what’s so amazing about that
the real skilled op is the unloaders
I am a forklift operator that is excellent skill
Tamdemnya kerenn om
Nice driver forklif...i like...mancap sudah hehe
Mantap informasinya jangan sampe kasih kendor semangatnya
Coba bongkar ginset bos 😂
Amazing? How else do you think we load em
I do this all the time with a single forklift. At my shop we have some tall jack stands so place them a few feet from the end of the load while I reposition the tow motor to grab the end for the final push.
rupe53 “Tow Motor” was my nickname back when i drove
lift-truck .
Love to sell forklifts & love to see these videos!
amazing skill forklift operator 👍
We used to do this at Simpson Lumber in Tacoma Washington It was all export to China.Rumor was laborers had to unload one board at a time
Robert Dawson ...yup some asian destinations would require to unload by hand bombing it out 1-2 boards at a time
start of video 2guys on one forklift very safety
Anyone notice he broke the strap?
3:27 ish, but was it the strap or the load?
Yep. I call him an amateur
@@nmartin32950 Strap holding the 'picker' to the load to give it clearance for the forks.
Nothing amazing about it. Simple machine, simple task. Buisness as normal.
man in the red shirt standing in the wrong spot the load could've fell down on top of him. I have been driving forklift 25 years and say that is no good
Not only that but also passenger on the small forklift....big no no
peter brown this was not amazing at all, just dangerous driving. My forklift instructor would've had a fit if he saw this.
Ok...still waiting for the amazing!!!??
Now that's what you call teamwork
Teamwork make the dream work baby
Enak tuh loading sprti itu bisa cpt selesei meskipun partai banyak
I can’t believe it’s not clickbait!
Muat Mah gampang.. yg susah NTU keluarinya bro.. berapa menit coba😁😁😁 salam 2garpu
xenangdoosan.com/
Well i am ausy but work in indonesia and all i can say about time i see the boys working fast :)
Not amazing at all... Standard.
Yeah, was waiting to see the amazing skills. This is something any forklift operator can do with practice. You can tell they have been loading this way for some time.
Also.....the 2nd Forklift has 2 operators? lol Amazing skills for sure!
Not standard. Substandard this shit was abysmal, safety regulations left the building that's for damn sure. I mean did you hear his thump into the rear of that truck? Tall about not caring about load nor equipment
*work place safety has left the room*
Are those pallets they loading??
So good
excelente forma de cargar container de 20.p en equipo.de parte de los operadores.
Teamwork make the dream work
😂😂😂 At the Port of Hamburg we do this every day!!!!
How is this amazing it's simple
Wow enjoyed watching the forklifting what a massive warehouse new friend connected permanently stay safe and see you when you visit🤝🔔
Oh did they got it out
My boy Shawn could get that in the trailer without a second lift
I'm been trying forklifts for 20 years. Ain't impressed! Yeah getting it out gonna be a bitch.
Now how do you pull them out?
1:06 oh yeah... it's just amazing forklift skills lol
Mantap bang 🎉🎉👍
Did the amazing bit happen?
How do you get them out?
wonderful skills :)
Now I want to see them unload it that easily.
I love to see when the whole load has to be recouped at the destination
Salvatore Di Costanzo im forklift operator you like give visah
Perkerjaan sehari2 saya dulu🤣🤣🤣
How They Goin To Bring It Out Later
Nice job!!!! : when he(green forklift driver) bumped a container ,so it was shaking like an earthquake disaster.🙈🙈🙉🙉
I do this everynight at BMC so what's amazing about it
Rite there's nothing amazing about it those are just basic forklift skills
@@bullet7873 my friend I'm also forklift driver and i need job please help me
@@northsaah7629 ...you're asking random people for a job through RUclips comments?
My man what location are you? Im posted out in Utah 2700
@@nmotschidontwannagivemyrea8932 man any good thing can happen in life if you seek ok
"HAHAHAHAHA, YOU'RE TOO LATE SONIC. I AM NOW FORKLIFT CERTIFIED!!!!!"
nice job!! :D
Skills? Lol! Any experienced forklift operator should be able to do this.
Nuuub
If i do that where im working my career is over lol + the only reason they showing their amazing skills to the world is because they are to poor to afford a proper loading dock lol
@@deviljes666 just like Mexicans are too poor to afford snow.
Lol thank you!! Not hard at all
Wow 😮 so amazing
Not difficult at all. I have to unload heavy pallets from side of trucks while driving on a road at an angle with pot holes and bumps while driving said pallets up kerb. Just glad the forklift has extended forks.
The "thud" sent me on the floor
Am also a forklift operator.. its very eady to loading inside the container.. but how you ll offloading the items .. 🤔🤔 its takes long time for sure
agree i did not see any whay a forklift can get a good hold to get them out again, so i wounder how they get the stuff out agian in a good time frame
Amazing huh🤔 lol looks like flat bed freight to me😀 o yea y is it amazing 🤔
I guess the second guy on the green forklift is the trainee or trainer?
Wow! Amazing.
how did they unload these?
Where is this factory?
how they unload this ? :D
How to get out this things back? Any video?
Daaaam! Precision with the incision!
TrickehTrickeh..now how do we getem out
How do we get it out? Not my problem.
That's amazing? Then I guess that makes me a magician
Very nice
They did a good job. I’ve been there and done that. They should have gotten a flat bed. The question is how are they going to unload it once it gets to it’s destination.
The same way they put it in but in reverse
Mantap bang. Jangan lupa mampir
Super iam fork lift operator
Where are you from brother?
Mantap bang
Nama perusahaannya apa itu banh
Ini produknya SWG ya?
Faço isso todos os dias com peças de aço de 20 a 30 metros de comprimento.
What's amazing? They loaded the container even managed to run into it.
3:27 Achievement : break a hundred straps.
Jossss
Lebih jos maneh lek forklift nya cm 1