As a Forklift Mechanic i now understand why i get those weird repair jobs, when a guy completely annihilates a part of the forklift that i believed to be fool proof... xD
I agree Mr Red. I just got my licence and my mentor warned me not to drag the forks because it would put unnecessary pressure on the hydraulics and chain, getting them out of alignment.
Best part is that no one hasn't shown how to do a 180 degree handbrake turn with a forklift. That was fun to do when I drove them. :D Also doing precise 90 degree handbrake turns was fun too.
@@Stoned_Pony thought exactly the same thing. That precision is impressive, but you have to have a forklfit that allows that. Electric stuff that I drive simply isnt sensitive to input enough to achieve that.
Not all I have forklift license driven one for 10 years plus trust me it’s not impressive but dangerous and only a dickhead would use this as a stunt machine as much as I don’t want to start any trouble or argument I will politely disagree with you sorry 😐😉🙂
Considering this is supposed to be "tricks" I thought he was going to scoop up the board with the forks without stopping. Like, how much skill does it take to run over a piece of lumber?!?
I unintentionally ran over a large chunk of wood from a broken pallet the other day going pretty fast and around a corner. Bounced me up sideways on two wheels for probably a second or two before landing back on all four. Scared the shit outta me, but it probably woulda looked pretty cool on camera.
Especially the one where he hits the 4x4. And all those dumb coin flips with the forks put a lot of unnecessary stress on the shafts and pistons. Hope they had the decency to greased the lifts before the fucked with them. 😆
I have done the coin trick it is fun and safe. The box manipulation is impressive, and placing the coin on the bottle is really neat. I however do not condone the stunting, it is very dangerous and can go south fast with your life.
Could not agree more crimson. These ‘cowboys’ should stick to horses if you catch my drift. The double tongues aren’t some hoe to be trifled with. Trifling forks, Is for dorks. Keep your tongues down comrade
I know I’m year late on this comment, but that guy doing donuts at the end was being an absolute jackass. And I don’t even drive a forklift. You trip, you slip, you get hit, and now you’re run over with a multi ton machine. Bad idea. Whatever gets run over will be flattened by the shear weight of the counter weights in a forklift.
Judging by the sound he makes when he gets back on it, the seat has a switch that puts the gear into neutral. The reachtruck I operate has a dead-man switch, but it sure won't stop it when I jump of it (fortunately!).
4 Hours? I drive a fork here in Australia and can load a B double semi, that is a truck pulling 2 trailers...the lead or 'A' trailer holding 12-14 pallets and the rear or 'B' trailer holding 22-24 pallets in around 30 mins, depending on how fast the driver is strapping his load down as I go. and if I'm loading a truck the has load restraint curtains and they dont need to strap and and I get a good rhythm going I can do it in around 25-30 mins.
@@catey62 not all loads are the same. Some trucks are floor loaded at 20,000 pieces. That can take a long time sometime. Also the fact of the matter is sometimes the wait is so long because I got 5 trucks in a door, 3 waiting In the yard and only 1-2 guys to load them.
As a forklift driver for over Thirty Years I would like to say first...The Coin Trick is not that Hard and is overdone all over the net. Second....I like the Cigarette lighter trick...now that one was original and Pretty impressive. Third....The rest of the Video isn't so much tricks as just asinine unsafe stunts that I would not recommend. Forklifts are dangerous Vehicles. They weigh more than the average pickup truck and are unstable when used in unsafe ways. I have seen people seriously injured and killed by unsafe acts with forklifts. These individuals should not ever be allowed to drive a forklift again and I hope that their employer saw these Videos and immediately Fired them
In public doing any of those stunts would be pretty stupid but not if it’s only you and your own forklift, otherwise all risk-taking stunts people from parkour to cycling and beyond would be stupid too, and half of people in talent shows.
@@Crazzilla A phone will not tip over and turn anyone or anything around you (including your own arm or head if any of those are looking out at the direction it's falling) into a pancake. And the phone does not have a gigantic ass battery that you're sitting on constantly that will blow up instantly from the slightest hint of flame. And a phone doesn't have two stakes that you can get somebody impaled on.
The quarter tricks are easy. The cigarette is impressive. The rest are mostly unsafe stupidity. Let's see some real tricks similar to the boxes but more complicated!
Same here. Idiots keep me deep into overtime. Last Friday, Mario Andretti on a forklift decided to haul ass past my service van while I was waiting for my next lift to repair. He found out that you can't fit an 8FBCU30 through a 3 foot space between a Promaster van and a steel roof support pole. Didn't do my van any good.
Second video thanks a lot! I've unloaded shipping containers loaded like this with ONE forklift here in the USA. Chaining pallets is fine until you get a couple that collapsed over seas
most of these guys would be fired on the spot if i caught them doing this shit on my watch. The only exception is the quarter flipping trick. we do that as a skill test when we get a new hire that says they already know how to drive the lift =).
The "box trick" was the best one. You can see how precise he drives & handles the boxes with constant speed. He got skills. The coin flip tricks are easy with a thin fork tip so that does not impress me. The one with the lighter would have been great if it was a "one take" video. There was a "cut" just before he lighted the cigarette so i think it has been manipulated. The guy who jumped off the forklift ist simply stupid. People keep forgetting how heavy a forklift is. forklift accidents are fatal in most cases and cause serious injuries so always be aware and dont do stupid risky things. Its not worth it.
The second one is not a "trick." It's just a bigger machine lifting a smaller one. What's hidden in the fork extensions, and that is what is allowing him to do it.
Not to mention its actually really dangerous. Normally that small forklift's footprint would extent out to the outer edges of its tires. With the small forklift being on forks inboard of the wheels it effectively raises its sideways center of gravity increasing the chance of the small forklift falling over to either side if he picks up the load off center of his forks.
The coin flip trick is a great one because it's super easy for anyone that has even minimal forklift driving skills, but it looks really impressive. I tried it when I first saw this trick, and was able to flip two dimes at once onto each forklift blade with only a few tries. And it's not because I am exceedingly talented at driving a forklift.
I would love to see you explain the two yellow forklifts manoeuvre if health and safety walked round the corner lol. Respect though, I do love an inventive manoeuvre to overcome problems, I’ve had a few bum squeakers myself in the past, very satisfying when they work out though 👏👏👏
I hate guys that burn their tires. Unnecessary spilling and destroying and polluting other people's air for no reason, with the risk of a fire that might make things explode in the immediate vicinity.
Broooo @3:53 ,I was there when that video was made at work lmaoo I can’t believe this hit RUclips with over 1millons views !!!! United groups of companies was a good job !!!
oh, i was looking for tricks that make me a better worker, not unemployed/unlicenced/prosecuted. 'how to lose your job in one easy move' maybe you could do 'circuit breaker lockout prank' or 'fake handrail on scaffold prank' XD
+Jake Shaw OSHA was founded by Nixon as an agency of the Department of Labor. They should be abolished along with his Controlled Substances Act and the DEA, imo,
This is the peak problem of social media. Do extremely bad things that could immediately get you fired with no recourse or second chance. Smooth brains all around.
None of these are amazing. I'm so annoyed by people thinking the coin thing is so cool...drive a forklift for 6 months and you can do it too. I wanted immaculate accuracy of loading, stacking or unloading pallets/containers. Anyone who has drove a forklift for a while can pick up a coin.
Been driving for 15 years, the coin is old news but I do give credit to the guy driving the massive lift doing the coin in the bottle for the simple fact u can't see crap on those big lifts.
Dude who jumps on and off lift has never seen sombody lose the lower half of their leg when it was crushed and tankgled in a lift guy i worked with got off before lift stopped and his shirt pulled it back into gear and ran himself over and it cost him his leg it was pretty gruesome i had to work controlls for ems guys so they could get him untangled. And the person doing the burnout would be fired i am all for the occasional burnout but not on a piece of equipment that cost 95$ a hour to work on and 1000 replace those "tires". I guess now that i have a business and pay those bills the cool factor goes away fast when people do stupid shit
I’ve done the coin trick onto the water bottle using a crown rc. Doing it on the propane is actually much easier to do because you are able to bounce the forks to move the coin. Not to mention a sit down lift has more tilt than a standup.
What's religion have to do with it? Judaism is a religion anyone can be Jewish, just like anyone can be catholic. People dont even know why they dont like jews
I see I'm not the only one who came here to see Top 5 Amazing Ways to Get Fired, and/or Get Killed, and/or Commit Manslaughter! ... Except for the stupid coin tricks and the thing with the lighter (*except* for the one driving towards the camera ... that made my heartrate go up). Those are super boring compared to the amazing stuff I see normal drivers doing every day, while doing their actual jobs -- correctly! The only people who find this impressive are the same ones who don't understand how much these things weigh, or how many blind spots they have....
5 and 4 may be necessary evils but if I am the safety manager, the other maneuvers would be out of the question and the operator fired immediately. Will have my video recordings as evidence. I won't be explaining to your family the cause of your death was because you were showing off. Some of those aren't tricks, they are a disaster waiting to happen. Another thing, why record something so dangerous or unsafe and against your company's policy and then post it on RUclips?
Anybody who has driven a fork lift will also know how much damage they can do stock and also people when something goes wrong . Those little kids pulling stunts on the forklifts are not only putting themselves at risk but also the people around them , yes to some it might look cool etc , only iv seen what happens when someone pulls a stunt on one with their mates cheering them on until things went wrong and a high stack of timber was hit and knocked over killing 2 who were standing on the other side
I see a few future Darwin award recipients. Just hope they dont hurt anyone else in their ignorance. Been operating these over 2 decades and wouldn't pull some of this recklessness. Keep it safe ppl. Everyone wants to go home at the end of the day.
Ingredient & Packaging Materials Management Supervisor for 38 1/2 years experience, two warehouse associates with 36 years & 32 years of experience, all licensed & trained for sit down & stand up forklift trucks. ZERO accidents & incidents, daily forklift inspection checklist, trailer air lines locked out, front tractor wheels & rear trailer wheels chocked, BOL PO must match PO & amounts, note any damage on BOL & take photos & etc. We are professionals that care about ourselves, families & other associates at work. Any of these types of unsafe acts, either witnessed in person or captured on video will result in immediate termination. What most people don't know or understand about our jobs, EVERYTHING that's used to produce & package a product starts with us. You must have people that care about what they do, pay attention to details, are interchangeable & will work together to finish the job. If any one piece of this is missing, it will make the job more difficult. All three of us have been working together doing this for over 30+ years each. Other associates tell us our jobs are jobs are easy. It appears to them that way because we know what we are doing. Believe me when I tell you it's not. Our motto: work smarter, not harder.
Sounds like you’re just disappointed in your abilities to pick up a quarter with the forks. Lighten up dude, after all is said and done, it’s just a FN job. You must be a real DB to work for. I sure as hell wouldn’t work for ya. I bet you inspect the shitters before your shift starts too.
@@davemoskot1776, I am an "OPERATOR," not some dipshit who watched a safety video and got my "certification." Single forks, double forks, slip sheets, roll clamps, box clamps, layer pickers, boom attachments... Give me a half inch on either side, and I'll make it happen. I have shoved a 94" metal object into a 92" wide container (i told the boss this was a bad idea). That being said... I would be thrilled to work for him. He has been in his industry long enough to know what is safe, and what is acceptable for a time allotment. You don't have a clue.
You, sir, are a person I would be happy to work with. You know what entails the title of "operator" versus "driver." Any operator would be happy to work for you...
The guy getting off the lift while the lift is spinning would have the papers right this instant. Hard to do, our lifts won't work without seat belts on.
I tried those awesome tricks today after watching this video, now im unemployed
E stem it is funny story, right?
Hahaha. Wtf!!
Probably get paid more lol
🤣😅🤣😅
Dang! I hate when bosses don't understand science
As a Forklift Mechanic i now understand why i get those weird repair jobs, when a guy completely annihilates a part of the forklift that i believed to be fool proof... xD
never underestimate a fool!
@@n00bF0Sh0 Amen 😂
I have an interview this morning for a position as an entry level forklift tech, I think I’ll keep this video to myself
I agree Mr Red. I just got my licence and my mentor warned me not to drag the forks because it would put unnecessary pressure on the hydraulics and chain, getting them out of alignment.
Best part is that no one hasn't shown how to do a 180 degree handbrake turn with a forklift. That was fun to do when I drove them. :D Also doing precise 90 degree handbrake turns was fun too.
Somewhere, an OSHA agent, manual in hand, burst into flames. Head to toe.
EH&S here. Only mildly singed so f... pfssst!
😂 LMAO
😂😂😂
Shoulda named this video “how to get fired from a warehouse
Yeah definitely
That's how I read the title
The manager: “listen you’re cool and all in fact I liked that trick, but gtfo pls”
Exactly
Must really suck to work with you guys. Get a job where you dont have uptight Karen's breathing down your neck.
Boss: Why are we running out of propane often?
Worker: 🙄🙄🙄🙄
Just say undetected leak. Must be the cheap hose.
😂😂
This is only impressive to people that haven’t actually used a fork lift.
Yea, flipping a coin onto the forks is actually pretty easy, but lighting the cigarette was pretty impressive.
@@Stoned_Pony thought exactly the same thing. That precision is impressive, but you have to have a forklfit that allows that. Electric stuff that I drive simply isnt sensitive to input enough to achieve that.
Not all I have forklift license driven one for 10 years plus trust me it’s not impressive but dangerous and only a dickhead would use this as a stunt machine as much as I don’t want to start any trouble or argument I will politely disagree with you sorry 😐😉🙂
Yea for us forklift drivers it could either be cringe video or how to get fired 101
Factssss
As a forklift instructor, cute video. Here are your multiple safety violation papers and your termination papers.
I was just thinking about that.
Forklift instructor... that’s a real thing? Like a full time job? Not a loadmaster or heavy equipment instructor?
@@MrLongboarder87 yes it is
@@MrLongboarder87 no, it isn't, its part of his job. There will never be a forklift instructor
@@robertgammett8718 says someone who probably has never driven one
The dude hitting the 2 by 4 is fired immediately
and the guy recording him
Lmao
Considering this is supposed to be "tricks" I thought he was going to scoop up the board with the forks without stopping. Like, how much skill does it take to run over a piece of lumber?!?
I unintentionally ran over a large chunk of wood from a broken pallet the other day going pretty fast and around a corner. Bounced me up sideways on two wheels for probably a second or two before landing back on all four. Scared the shit outta me, but it probably woulda looked pretty cool on camera.
@@Stoned_Pony But, are you down to do it again while I record???
8:25-warning up your tires before that all important forklift drag race.
Just ask Ryo Hazuki about the importance of warm fork truck tyres when it comes to racing
*warming
As a forklift mechanic, most of these really hurt to watch
Especially the one where he hits the 4x4. And all those dumb coin flips with the forks put a lot of unnecessary stress on the shafts and pistons. Hope they had the decency to greased the lifts before the fucked with them. 😆
As a forklift OPERATOR this hurt to watch
@@michaelriley1531 yeees, and it looks like a dollar general distribution which explains a lot
I have done the coin trick it is fun and safe. The box manipulation is impressive, and placing the coin on the bottle is really neat. I however do not condone the stunting, it is very dangerous and can go south fast with your life.
Could not agree more crimson. These ‘cowboys’ should stick to horses if you catch my drift.
The double tongues aren’t some hoe to be trifled with.
Trifling forks,
Is for dorks.
Keep your tongues down comrade
Yeah, operator here ... I'm with you.
I know I’m year late on this comment, but that guy doing donuts at the end was being an absolute jackass. And I don’t even drive a forklift. You trip, you slip, you get hit, and now you’re run over with a multi ton machine. Bad idea. Whatever gets run over will be flattened by the shear weight of the counter weights in a forklift.
All osha approved!
China doesn’t have OSHA 👀😂
all of them bulshit videos, you work with forklift 2 days , you would do samethings
Lol!
NO!!!!! ¡!!!!!!
@@gogert25 they have natural selection instead😂😂😂😂
Alt title: How to Speedrun to involving OSHA and getting fired.
You know you're old when you seen or done these things in your youth I've been pretty blessed
I hear you. Cheers
OSHA just put me on a list for just watching this.
Hey my brothers name is Tyler smith
Nice to meet you
That guy spinning around is why Dead Man seats are now standard 🙄
My ankles hurt watching that shit
Judging by the sound he makes when he gets back on it, the seat has a switch that puts the gear into neutral. The reachtruck I operate has a dead-man switch, but it sure won't stop it when I jump of it (fortunately!).
The real trick is not slipping
How many shipping/receiving folks we got here?
Me! :-)
Two
@@torycaswell4204 represent 🤘
@@catey62 hells yeah!
5:23 jump cut to lighter being on, impressive set up but I question that end
Ya, I was wondering how they were going to get the lighter lit without knocking it over. The edit answered my question.
Yeah, my manager wouldn't consider those amazing to be honest
Well What if YOU ARE THE MANAGER????
He'd be mighty infuriated I would think, and the operator probaly wouldn't be showing up the next day.
Quiet Entropy we get dismissed for not even having a seatbelt on imagine this
Well , amazingly irresponsible he would say.
SQuidward, ur fired
Stop forking around and get back to work, now I know why it takes over 4 hours to load a truck. 😂
4 Hours? I drive a fork here in Australia and can load a B double semi, that is a truck pulling 2 trailers...the lead or 'A' trailer holding 12-14 pallets and the rear or 'B' trailer holding 22-24 pallets in around 30 mins, depending on how fast the driver is strapping his load down as I go. and if I'm loading a truck the has load restraint curtains and they dont need to strap and and I get a good rhythm going I can do it in around 25-30 mins.
@@catey62 not all loads are the same. Some trucks are floor loaded at 20,000 pieces. That can take a long time sometime. Also the fact of the matter is sometimes the wait is so long because I got 5 trucks in a door, 3 waiting In the yard and only 1-2 guys to load them.
while the coin on is still kinda dumb, it is the only one i would say go for. The rest (such as 7:11 ) could quickly lead to serious injury or death.
4:00 the only way I’m lighting cigarettes from now on at work
Turks are masters of this work is already a video made in Turkey.
As a forklift driver for over Thirty Years I would like to say first...The Coin Trick is not that Hard and is overdone all over the net. Second....I like the Cigarette lighter trick...now that one was original and Pretty impressive. Third....The rest of the Video isn't so much tricks as just asinine unsafe stunts that I would not recommend. Forklifts are dangerous Vehicles. They weigh more than the average pickup truck and are unstable when used in unsafe ways. I have seen people seriously injured and killed by unsafe acts with forklifts. These individuals should not ever be allowed to drive a forklift again and I hope that their employer saw these Videos and immediately Fired them
This is a genuine question, but why assume they don't accept that risk? Many people do dangerous things simply for fun, like every extreme sport ever.
This is a turkish forklift operatör .
Original video is
ruclips.net/video/PixASKRMCxo/видео.htmlsi=2EbedDwHloNxjKcP
In public doing any of those stunts would be pretty stupid but not if it’s only you and your own forklift, otherwise all risk-taking stunts people from parkour to cycling and beyond would be stupid too, and half of people in talent shows.
Some operators are the master of forklift.
9:29 good way to get fired
More like the dumbest way
Really needs the tile of: 5 Forklift accidents waiting to happen!
A forklift isn't something you do "tricks" with...
And a phone is not something you "play" on while at work. Welcome to the rat race.
@@Crazzilla A phone will not tip over and turn anyone or anything around you (including your own arm or head if any of those are looking out at the direction it's falling) into a pancake. And the phone does not have a gigantic ass battery that you're sitting on constantly that will blow up instantly from the slightest hint of flame. And a phone doesn't have two stakes that you can get somebody impaled on.
The Industrial Retrospective don’t be a pussy
If you're an idiot it is.
Didn’t you watch the video?🤔
*Using up all the propane doing forklift tricks
Boss: What happened to all the propane I just ordered?
Employee: Yes.
The quarter tricks are easy. The cigarette is impressive. The rest are mostly unsafe stupidity. Let's see some real tricks similar to the boxes but more complicated!
Yeah, number 2... " Safe "
I wanna see a fork spark a lighter.
lol not easy by any means
Senior XJ agreed, this is just promoting dumb and possibly fatal behaviour..
I wouldn't call nesting crates a trick, just a skill needed for work at that facility.
I am a forklift mechanic and now I see why I am so busy
Same here. Idiots keep me deep into overtime.
Last Friday, Mario Andretti on a forklift decided to haul ass past my service van while I was waiting for my next lift to repair.
He found out that you can't fit an 8FBCU30 through a 3 foot space between a Promaster van and a steel roof support pole. Didn't do my van any good.
@@fortj3 What a coincidence. I work for a Toyota dealership and I know the model very well. 4-wheel electric sit down. Decent size truck.
I CALL FORKLIFT TRUCKS CREATURES FROM GOD THEY HELP WITH ALL KINDS OF WORK AND SAVE LIVES YES I HAD MY LIFE SAVED BY BIG BOY
Klaus still does the best tricks
Klaus the impaler lol
The Weather Channel called. They want their music back.
Actually was looking for credits on it so I could sample it. Haha
Should be titled: stupid tricks with forklifts. Would have fired my warehouse guys for most of these stunts
I work in a scrapyard, if you think these guys are bad you should see what we get up to...
Now is the guy with the lighter using a clutch brake. That’s the real skill test.
That guy who lit a cigarette with his forklift is a legend
This is a turkish forklift operatör .
Original video is
ruclips.net/video/PixASKRMCxo/видео.htmlsi=2EbedDwHloNxjKcP
Second video thanks a lot! I've unloaded shipping containers loaded like this with ONE forklift here in the USA. Chaining pallets is fine until you get a couple that collapsed over seas
Top 5 Amazing Forklift Tricks That Will Get You Fired
Chicks dig forklift certified operators.
I guess that SAFETY FIRST is the Last thing in their heads.
how ironic
Big deal, I performed a C-Section with a forklift once.
I've master bated using a forklift once
most of these guys would be fired on the spot if i caught them doing this shit on my watch. The only exception is the quarter flipping trick. we do that as a skill test when we get a new hire that says they already know how to drive the lift =).
You're fired!
Sounds like you're a fun boss
you guys hire people without certifications ?
o gee! Use a bigger forklift to lift a smaller forklift, to lift a pallet. Never would have thought of that, thanks youtube.
Manager: i'm perplexed that you can achive such amazing tricks with the forklift we provided instead of work hard for
the company
Should be renamed Top 5 Amazing Forflift Twats
The "box trick" was the best one. You can see how precise he drives & handles the boxes with constant speed. He got skills. The coin flip tricks are easy with a thin fork tip so that does not impress me. The one with the lighter would have been great if it was a "one take" video. There was a "cut" just before he lighted the cigarette so i think it has been manipulated. The guy who jumped off the forklift ist simply stupid. People keep forgetting how heavy a forklift is. forklift accidents are fatal in most cases and cause serious injuries so always be aware and dont do stupid risky things. Its not worth it.
The second one is not a "trick." It's just a bigger machine lifting a smaller one. What's hidden in the fork extensions, and that is what is allowing him to do it.
Not to mention its actually really dangerous. Normally that small forklift's footprint would extent out to the outer edges of its tires. With the small forklift being on forks inboard of the wheels it effectively raises its sideways center of gravity increasing the chance of the small forklift falling over to either side if he picks up the load off center of his forks.
@@alekkonert158 more impressive when this fork on fork system is used to gain another 6 metres in load height
Actually , the Big Forklift had 8 foot tines . For handling Empty Containers or Large indivisible loads .
pls rename this video how to get unemployed😂
Peter Griffin: hold my beer
The cigarette one is true skill lighting that lighter like that and standing it up perfectly under the cig wow
This is a turkish forklift operatör
Original video is
ruclips.net/video/PixASKRMCxo/видео.htmlsi=2EbedDwHloNxjKcP
I've been forklifting for 8 years and I laughed so hard at this moment 🤣
1:39
The coin flip trick is a great one because it's super easy for anyone that has even minimal forklift driving skills, but it looks really impressive. I tried it when I first saw this trick, and was able to flip two dimes at once onto each forklift blade with only a few tries. And it's not because I am exceedingly talented at driving a forklift.
SHAKE HANDS WITH DANGER 🎸🎸🎸
I would love to see you explain the two yellow forklifts manoeuvre if health and safety walked round the corner lol. Respect though, I do love an inventive manoeuvre to overcome problems, I’ve had a few bum squeakers myself in the past, very satisfying when they work out though 👏👏👏
Liftgate service will not be required in this video
I hate guys that burn their tires. Unnecessary spilling and destroying and polluting other people's air for no reason, with the risk of a fire that might make things explode in the immediate vicinity.
Broooo @3:53 ,I was there when that video was made at work lmaoo I can’t believe this hit RUclips with over 1millons views !!!! United groups of companies was a good job !!!
all this is not an indicator! Here unload 33 pallets in 10 minutes, this is an indicator!
Depends where youre unloading them too doesnt it?
I could 50 pallets in 10 mins if i was only going feet away 😂
oh, i was looking for tricks that make me a better worker, not unemployed/unlicenced/prosecuted.
'how to lose your job in one easy move'
maybe you could do 'circuit breaker lockout prank'
or 'fake handrail on scaffold prank'
XD
so..... what does OSHA have to say about this?
Jesse H nothing because these were done outside of the United States
touché
Jesse H ssssshhhhhh
I thought OSHA was world wide
+Jake Shaw OSHA was founded by Nixon as an agency of the Department of Labor. They should be abolished along with his Controlled Substances Act and the DEA, imo,
This is the peak problem of social media. Do extremely bad things that could immediately get you fired with no recourse or second chance.
Smooth brains all around.
Top 5 Amazing Forklift Health and Safety Violations
I'm impressed with some of the tricks they can do, but free shipping will always be my favorite forklift even through he maybe part battle bot.
Hell Yeah Free Shipping! Tombstone is my favorite Battlebot!
None of these are amazing. I'm so annoyed by people thinking the coin thing is so cool...drive a forklift for 6 months and you can do it too. I wanted immaculate accuracy of loading, stacking or unloading pallets/containers.
Anyone who has drove a forklift for a while can pick up a coin.
yeah i drive forklift for 4 years now, i did it after like 2 weeks lol
Seriously i was thinking the same thing been on a forlift 2 years now
Been driving for 15 years, the coin is old news but I do give credit to the guy driving the massive lift doing the coin in the bottle for the simple fact u can't see crap on those big lifts.
Полная бредятина. Беларусские круче могут.
Health & Safety has entered the chat
But, the lighter and cigarette is pretty impressive.
Yea, I just drive them. I don't have any say in buying them.
Dude who jumps on and off lift has never seen sombody lose the lower half of their leg when it was crushed and tankgled in a lift guy i worked with got off before lift stopped and his shirt pulled it back into gear and ran himself over and it cost him his leg it was pretty gruesome i had to work controlls for ems guys so they could get him untangled. And the person doing the burnout would be fired i am all for the occasional burnout but not on a piece of equipment that cost 95$ a hour to work on and 1000 replace those "tires". I guess now that i have a business and pay those bills the cool factor goes away fast when people do stupid shit
This is fake you can see when they had the fork going to the lighter the vid jump end then you see the 🔥...👎
I dont think he realy done that. There was a "cut" before he lighted the cigarette. Id be impressed if it would have been a one take video.
Robert Hoage
Potato crate stacker and coin/lighter guys are neat, the rest are just dangerous
I’ve done the coin trick onto the water bottle using a crown rc. Doing it on the propane is actually much easier to do because you are able to bounce the forks to move the coin. Not to mention a sit down lift has more tilt than a standup.
Unbelievable information, wow nice
Kids do not follow in there lead. 100 die and at least 95,000 injured each year because of heavy lifting equipment accidents.
Fired for clicking on the video.....
At 2:15 an OHSA Safety Manual exploded.
Screw safety.
Alex, what is "OSHA"?
actually the only hard one is the cig lighting probably . the rest aren't too hard if you drive lift for a while
wasnt impressed until he lit a cigarette with his forks! insane!
This is a turkish forklift operatör .
Original video is (one take)
ruclips.net/video/PixASKRMCxo/видео.htmlsi=2EbedDwHloNxjKcP
4 commercials for a 10 minute vid? Not even I'm this jewish
What's religion have to do with it? Judaism is a religion anyone can be Jewish, just like anyone can be catholic. People dont even know why they dont like jews
Put it in the oven and call it done. Just pay the monnnnney and go ad free. My time is with more then $16.99 CD a month
@@blades2255 he mean that jews only want money just look at family guy Hey jokes
@@gmssnarr456: I'm ad free using an adblocker 😃
How pissed were you when they dropped the coins on the ground? 😂😂😂😂
Somebody watching this video will be influenced to try it
Good lord help whoever is ignorant enough to try anything in this video..
You would be fired if your boss seen you burning rubber on the forklift.
Agree with the one below. Good skills but not for on the job stunts on company time. Risk this and insurance issues at home.
Getting out of moving truck is a good trick.. also known as natural selection
I see I'm not the only one who came here to see Top 5 Amazing Ways to Get Fired, and/or Get Killed, and/or Commit Manslaughter! ... Except for the stupid coin tricks and the thing with the lighter (*except* for the one driving towards the camera ... that made my heartrate go up). Those are super boring compared to the amazing stuff I see normal drivers doing every day, while doing their actual jobs -- correctly! The only people who find this impressive are the same ones who don't understand how much these things weigh, or how many blind spots they have....
OSHA silently judging behind the camera.
5 and 4 may be necessary evils but if I am the safety manager, the other maneuvers would be out of the question and the operator fired immediately. Will have my video recordings as evidence. I won't be explaining to your family the cause of your death was because you were showing off. Some of those aren't tricks, they are a disaster waiting to happen.
Another thing, why record something so dangerous or unsafe and against your company's policy and then post it on RUclips?
*OSHA agent punching the air after watching this video.*
I would get written up for doing this in my Warehouse.
Facts bro underrated asf🙊👀🙈
You'd be straight up fired.
Anybody who has driven a fork lift will also know how much damage they can do stock and also people when something goes wrong . Those little kids pulling stunts on the forklifts are not only putting themselves at risk but also the people around them , yes to some it might look cool etc , only iv seen what happens when someone pulls a stunt on one with their mates cheering them on until things went wrong and a high stack of timber was hit and knocked over killing 2 who were standing on the other side
OSHA would love to see this
I had done it ,good videos 🙂
Other than cigarette/lighter & coin/bottle everything else was REALLY STUPID
expectation: expert level maneuvers/control
reality: idiots on forklifts before they were fired
I see a few future Darwin award recipients. Just hope they dont hurt anyone else in their ignorance. Been operating these over 2 decades and wouldn't pull some of this recklessness. Keep it safe ppl. Everyone wants to go home at the end of the day.
Ingredient & Packaging Materials Management Supervisor for 38 1/2 years experience, two warehouse associates with 36 years & 32 years of experience, all licensed & trained for sit down & stand up forklift trucks. ZERO accidents & incidents, daily forklift inspection checklist, trailer air lines locked out, front tractor wheels & rear trailer wheels chocked, BOL PO must match PO & amounts, note any damage on BOL & take photos & etc.
We are professionals that care about ourselves, families & other associates at work. Any of these types of unsafe acts, either witnessed in person or captured on video will result in immediate termination.
What most people don't know or understand about our jobs, EVERYTHING that's used to produce & package a product starts with us. You must have people that care about what they do, pay attention to details, are interchangeable & will work together to finish the job. If any one piece of this is missing, it will make the job more difficult. All three of us have been working together doing this for over 30+ years each. Other associates tell us our jobs are jobs are easy. It appears to them that way because we know what we are doing. Believe me when I tell you it's not. Our motto: work smarter, not harder.
Sounds like you’re just disappointed in your abilities to pick up a quarter with the forks. Lighten up dude, after all is said and done, it’s just a FN job. You must be a real DB to work for. I sure as hell wouldn’t work for ya. I bet you inspect the shitters before your shift starts too.
@@davemoskot1776, I am an "OPERATOR," not some dipshit who watched a safety video and got my "certification." Single forks, double forks, slip sheets, roll clamps, box clamps, layer pickers, boom attachments... Give me a half inch on either side, and I'll make it happen.
I have shoved a 94" metal object into a 92" wide container (i told the boss this was a bad idea). That being said...
I would be thrilled to work for him. He has been in his industry long enough to know what is safe, and what is acceptable for a time allotment.
You don't have a clue.
You, sir, are a person I would be happy to work with. You know what entails the title of "operator" versus "driver." Any operator would be happy to work for you...
never seen any forklift that can slip wheels or do donuts or work withut being in the seat ... they all have safetys. or are comprimised
The guy getting off the lift while the lift is spinning would have the papers right this instant. Hard to do, our lifts won't work without seat belts on.
Or weight in the seat.
the feats of precision sure i respect... the coin flips... great trick to wooo people... being a dangerous prick??? go shred your licence.
Tried the lighter trick today.....boss thought it was great but sacked me for smoking in the workplace....😁
Osha's would have a field day with this
You spelt dangerous and irresponsible wrong.
The second one is just stupid...that's why they make loading docks and pallet Jack's. Who does that?
China
@@dasfear726 ^...
5:30 was video edited .. he prolly messed this trick up 100 times before he was able to actually get the fork down on the if igniter 😂