I love that motor! Keep it up. By the way, I've noticed in my 2e that with Bosch sparkplugs i have better acceleration even from 1500 rpm compared with the NGK ones
the bosch seem to run alot better compared to the ngk spark plugs i have also used the champion spark plug i would not recommend these because 3 off them snapped off in my head was a mission to get the out
its a ee90R model built in New Zealand this is the base 2 door package but looks very similar to a ae91 yea quite like the shape of the ae80 but to expensive for a good condition one in my country.
Buen trabajo amigo 👍 una consulta la regla o admisión para los carburadores q número de parte tiene. Yo tengo un tercel 95 y quiero dejarlo como tu proyecto .
Love the build guys can't wait to see it driving, quick question if I fitted a 266 cam to my 2e would I have to make valve clearance on the piston aswell? or is it because yours is a 290
a 266 cam would run sweet can put a 280 duration before any problems with valve to piston clearance thanks i have a 266 in one of my engines and runs sweet good bit of add power as well thanks.
Hey man, good project you got going on... I am looking to buy a toyota corolla with a 2e carb engine hopefully this month end... I have heard alot about carb engines and how they are phasing out.... Question Is it possible to change the engine to a 5A efi or for longevity purposes what would you recommend be done for a smooth running vehicle, I will appreciate the feedback 🙏🏾🇿🇲
Hey mate the engine swap would me alot of work the 2e engine are quite fuel efficient I would recommend to upgrade the carb and replace the valve steam seals those are the most common issues with the motor thanks
@@RuggedGarage do you have aisin carburetor?linear? Or how it is called... And can you tell what i can do to lower the fuel consumption as much as possible? Thankz
nice work, do you really need the fuel regulator with that pump? I've got a starlet with 5efhe which I almost finished converting to carb. I cant use the stock fuel pump because its high pressure for EFI, so I ended up using an electric pump from an old Honda City, they came with carbs, but had electric pumps
Any idea where you can get a 2e service manual . My 2e is failing the emissions test for mot . Is this cause of valves leaking I wounder and maybe headgaskit is toast 🤔🫡
How did you get rid of the original vacuum System? Mine just got repaired, and The mechanics said, every connection is important, to run The engine smoothly.
they run good their prefect for high rpms make the car feel completely different would highly recommend this upgrade you wont see any massive gain with out a decent upgraded cam
@@RuggedGarage Thanks for the info. I wasn't looking for massive gains, just something that sounds better and better than the standard asian carburettor
hey the exhaust is 4 pipes to a collector then to 1 pipe here's the link to the one i brought if you want to have a closer look www.trademe.co.nz/a/motors/car-parts-accessories/performance/exhaust/listing/3269181177?archive=1&bof=KXIgCc4V
Essaie avec les bougies d'allumage. Champion CET8 . Écartement de l'éléctrode de masse 0,9mm. Ou a tu obtenus ce collecteur d'échappement ? Si ont peut s'aider avec des astuces , je suis occuppé a reconstruire une Corolla 2E .
J'ai juste commencé a reconstruire la Corolla je n'ai publié que 2 vidéos . C'est le 4e jours . Sur ce 2E j'ai un arbre a came et un carburateur mikuni mais je sais juste qu'il tourne bien car je commence par la carrosserie !!!
hey bro i used champion spark plugs before they don't seem to like the high rpms the bosch seem to do alot better and also last longer i brought the exhaust header from trade me here's the link thanks www.trademe.co.nz/a/motors/car-parts-accessories/performance/exhaust/listing/3239183386?bof=WjZgxkDV
This is so cool. Real my summer car vibes.
ha ha yea they are very easy to work on almost the same thanks mate
I love that motor! Keep it up. By the way, I've noticed in my 2e that with Bosch sparkplugs i have better acceleration even from 1500 rpm compared with the NGK ones
the bosch seem to run alot better compared to the ngk spark plugs i have also used the champion spark plug i would not recommend these because 3 off them snapped off in my head was a mission to get the out
@@RuggedGarage ngk denso and bosch are the only ones that should be used as per the manual?
I found the Bosch to fowl much quicker. On a track driver with fuel injection i could dig it. But definitely not on carbys.
Just my thoughts.
That's a mean set up mate... I rekon u got a ae91 aye...I got a ae80 with 2e 5 speed manual tranny...files like hell
Cheers👌
its a ee90R model built in New Zealand this is the base 2 door package but looks very similar to a ae91 yea quite like the shape of the ae80 but to expensive for a good condition one in my country.
Buen trabajo amigo 👍 una consulta la regla o admisión para los carburadores q número de parte tiene. Yo tengo un tercel 95 y quiero dejarlo como tu proyecto .
aint 4 barrel a bit overkill for a small engine like that?
When You Buy a carburetors, i wanna like these 🙏
Love the build guys can't wait to see it driving, quick question if I fitted a 266 cam to my 2e would I have to make valve clearance on the piston aswell? or is it because yours is a 290
a 266 cam would run sweet can put a 280 duration before any problems with valve to piston clearance thanks i have a 266 in one of my engines and runs sweet good bit of add power as well thanks.
Thanks guys 266 it is so
I see these are on interference engines?
What kinda carby is it, and where you get it from, I’m ganna get my cammed grinded to, also getting a full 2.5” exhaust system to
dual dcoe webers and a trd camshaft
Mis felicitaciones 👏 tienes el diagrama para fabricar el header y la admisión para los carburadores ??
Hi how did you get rid of that smoke from the night before? The next morning the smoke was gone. My 2e is doing that
do you have any more info ?
i see it's a rowland intake. are there any numbers on it ?
what carbs are you using with it ?
ill do a video on the intake they are hard to find now. im using dcoe 40 Weber carbs thanks
so dope bro, where in nz you based? wanna do some home tuning :D
thanks bro im based in Auckland
Hey man, good project you got going on... I am looking to buy a toyota corolla with a 2e carb engine hopefully this month end... I have heard alot about carb engines and how they are phasing out.... Question
Is it possible to change the engine to a 5A efi or for longevity purposes what would you recommend be done for a smooth running vehicle, I will appreciate the feedback 🙏🏾🇿🇲
Hey mate the engine swap would me alot of work the 2e engine are quite fuel efficient I would recommend to upgrade the carb and replace the valve steam seals those are the most common issues with the motor thanks
@@RuggedGarage do you have aisin carburetor?linear? Or how it is called... And can you tell what i can do to lower the fuel consumption as much as possible? Thankz
nice work, do you really need the fuel regulator with that pump?
I've got a starlet with 5efhe which I almost finished converting to carb. I cant use the stock fuel pump because its high pressure for EFI, so I ended up using an electric pump from an old Honda City, they came with carbs, but had electric pumps
yes you will need a fuel pressure reg so you can control how much fuel goes in. in my case its around 3-3.5 psi of pressure thanks
@@RuggedGarage I see, how much pressure can your pump build up? Thanks
Hi! Why the engines sounded like a tractor? Just curious.
no exhaust only the headers where attached thats why it sound bad
Want that on my 2e tazz
I like 👍👍✌️
thanks
Any idea where you can get a 2e service manual . My 2e is failing the emissions test for mot . Is this cause of valves leaking I wounder and maybe headgaskit is toast 🤔🫡
yea mate you can buy it online if the valve are leaking they might just need new valve steam seals and a lap on the valves might fix it
Wow what cain of carburetor are you using g
name is a weber carb dcoe 40
How did you get rid of the original vacuum System? Mine just got repaired, and The mechanics said, every connection is important, to run The engine smoothly.
i removed the whole metal vacuum assembly and wire in one way valves to make it run smoothly and make it more simpler.
I am currently building one in the UK. Where did you get your 292 cam please? Been after an upgraded cam for awhile.
custom cam got it welded up then shaven to the specs cost alot of money need you will need to find a company that regrinds camshafts
Where did you get the huge aluminium rad 😮
off a place in Australia it for a ae92 4age
Dude how can i make my 1.3 2e limit
Nice!
Thanks bro
Is that a fuel pressure reg beside the fuel pump u have ?
yep because the fuel pressure for weber carb needs to be set a 3-3.5 psi
Are those 2 carburators on one enggine ? Are the purpose to put more gasoline and air to the enggine?
Did you find an answer to your question?😂
How was fuel economy on this?
it was okay used more than a stock one though
Any ideas where i could get a 266 cam for same motor
Got mine done at Auckland cams
Did you convert the distributor to electronic or did u leave it points and coil ?
its factory electric dizzy but i might convert to coil and point
How do you fix an oil leak for this engine? I’ve bought a new oil pump but it’s still leaking
paper gaskets or toyota version of rvt sealant
Hi sir, what manifold is that? Is that will fitted to the 4AF?
south African manifold very hard to find now only fits 1/2/3 E motors
What way did do the vacum for engine ??
all vacum lines removed only brake booster
@RuggedGarage what did yo for the vacum adavce for the dizzy?
Will this fit a 4af?
no only a 2e motor
Where can I buy the admission and dual carburetion?
do you mean the intake manifold?
@@RuggedGarage yes!
What radiator is that bro
Pls let me know
upgraded 4age supercharged radiator ae92 you can buy them on trade me
Did you bore your pistons? Or is it stock?
stock bore size and piston i only got them drilled for the 292 cam i also rehoning the cylinders and i put standard piston ring on the pistons
Question, did you keep the A/C?
mine never came with a/c also its a bit of a power robber
How did you get that intake runners?
Brought from South Africa on eBay
does it affect its fuel consumption?
Yes it will use quite a bit more gas
How do find the twin dcoe 40s? Doing that modification too but thought it might be too much for the car
they run good their prefect for high rpms make the car feel completely different would highly recommend this upgrade you wont see any massive gain with out a decent upgraded cam
@@RuggedGarage Thanks for the info. I wasn't looking for massive gains, just something that sounds better and better than the standard asian carburettor
What is the specs of your exhaust manifold?
hey the exhaust is 4 pipes to a collector then to 1 pipe here's the link to the one i brought if you want to have a closer look www.trademe.co.nz/a/motors/car-parts-accessories/performance/exhaust/listing/3269181177?archive=1&bof=KXIgCc4V
Wha diameter wire spark plug used?
Just NGK spark plug
Do u still have this car
Yep I still have the car m8
bro playing my summer car in real life (i know its a different car)
Yea man easy car to work on so simple
Essaie avec les bougies d'allumage.
Champion CET8 . Écartement de l'éléctrode de masse 0,9mm.
Ou a tu obtenus ce collecteur d'échappement ?
Si ont peut s'aider avec des astuces , je suis occuppé a reconstruire une Corolla 2E .
J'ai juste commencé a reconstruire la Corolla je n'ai publié que 2 vidéos .
C'est le 4e jours .
Sur ce 2E j'ai un arbre a came et un carburateur mikuni mais je sais juste qu'il tourne bien car je commence par la carrosserie !!!
hey bro i used champion spark plugs before they don't seem to like the high rpms the bosch seem to do alot better and also last longer
i brought the exhaust header from trade me here's the link thanks www.trademe.co.nz/a/motors/car-parts-accessories/performance/exhaust/listing/3239183386?bof=WjZgxkDV
just checkout video good job on the body work keep it up
@@RuggedGarage I ordered galvanized Belgian sheet in 0.8mm and I will weld with mig. I'm not finished.
Talk louder m8 we are here to listen.
I'm changing to a GoPro soon I was filming all these on my phone
I think i much get me one where you from
Are you after the manifold?
The hole setup I also have a 1.3 toyota conquest carb
Mucho tiempo el motor ensendido sin agua ..
do 3e swap xD
i could got 2 of them
Do. you have Instagram
only yt atm mate
Where can i purchase a twin intake manifold? Thanks
you cant get the manifolds anymore i got the last three of them