Super Taper Wahl Clippers Not Cutting And Clippers pulling hair?? service For Best Performance Ever
HTML-код
- Опубликовано: 21 сен 2024
- Super Taper Wahl Clippers Not Cutting And Clippers pulling hair?? service For Best Performance Ever. Are your super tapers hair clippers lacking in performance? To the point, your Wahl clipper not cutting or clippers pulling your client's hair? Then you need to watch this demo that will give you a very easy to follow technique, how to fix Wahl hair clippers, to get your Wahl Super Tapers running like new again.
/ larrythebarberman
/ larrythebarberman
www.larrythebar...
=================================================
Email info@larrythebarberman.com
=================================================
Barber Videos: www.barbers.tv
=================================================
www.larrythebar... ( My Online Store )
=================================================
Barber Blogs: www.frequency60...
=================================================
Hair Clipper Converters: www.frequency60...
info@frequency60hz.com
================================================= 
Хобби
GREAT TIPS, keep up with what are you doing, you helped me a lot with my noisy wahl and i believe that i am not the only one who found that video usefull.
Well, I have just saved £££'s replacing a 20yo Super Taper in 2024.
This video gave me the insight I needed to self service and make my clipper purr again, Kudos Larry.
Good man x
I was looking at reviews of clippers when I came upon this. In many ways it is far more useful that a review: you can see how the thing is constructed, what goes wrong with it and what can be done about that. From this I can see that this is a proper professional tool made with metal held together by screws and is serviceable, not plastic and glue that will break irreparably. It also puts into perspective negative reviews like "the lever gets loose". That's fixable. All in all the most useful video I have seen on this subject, so thanks!
Rob Fisher
Very well put. I think it's great that, in this small corner of the market, no-frills workhorse appliances are still being manufactured despite the increasingly disposable nature of goods - you can't con pros!
I'm planning to buy these clippers to trim my facial hair - seems like overkill but I wouldn't spend a penny on any of these half-assed cordless stubble trimmers which frankly get tossed when you lose one part...
Watched this then made a little fine tuning to my personal hair clipper. Worked like magic right after. Thanks Larry!
This video saved me! Halfway through cutting my sons hair my clippers starting making a terrible loud noise and wouldn’t cut! Tuned the clipper just like you showed in this video and they were good as new! 🙌🏻👏🏻👏🏻 Thank you!
I noticed that you used red thread locker. This is an exceptionally strong adhesive. If the lever breaks, it will be impossible to remove the screw. blue thread locker would be more than enough for this application and would be removable in case of breakage. I always enjoy your presentations and get much from them.
Cheers mate. Nearly went out and bought new clippers. Now they are as good as new
Thanks a lot Larry, for a lucid explanation and demonstration.
Sanjay Mahagaokar your welcome 🙏
Nice demo
Thank you
I only dropped my clippers from less than a foot high. I have tried everything in this and some other videos. I should have known not to get my hopes up. Thanks for putting this information out there, though.
great job, i was not happy the way my wahl was performing, now its great, thanks to you and God bless you..
What a great video. What a dude. Superb demonstration and explanation.
Thank you so much for a very well presented and informative video! All the best!
Larry bro, you saved my ass!
thanks a hole huge lot!
much love!!!
Thanks, my clipper work again, I saw your video and it's fixed by your advise.
Thank you sir!!!! Every step worked like a charm!
Thank you Larry , subbed
If you want to measure the 2lb pressure, stick the clippers on a set of kitchen scales, zero the reading, then press down like Larry does til the scales read 2lb. Bit more precise.
You have guess how hard you would have to press on a scale for it to read two 2lb - i hope helps you
Good idea!
Was half expecting him to do exactly that in the video
i love that!!
I dont understand English well. But after see this video i can repair my wahl clipper. No more noise👌👌👌
if you increases the tension then you gotta lubricate the blade really well
Cheers Larry. You've just saved my buying a new set this week 👍🏻👍🏻💈💈
Thank you. This has helped me out a lot! I haven't quite got mine working yet, but at least now I understand what's going on... kind of. A little more tinkering and think I got it.
Tnx man,my wahl works perfectly again,cheers
Do you have any idea why my SUPER TAPER CORDLESS keep pulling hair? Try to fix and clear the blades but still have the problem. Thanks
The power screw on some wahl's have a tab that won't let you adjust it too much , if you find that you need to go past this point you can pry the plastic bit with the tab off completely and underneath it is a normal philips head screw ....
Great job Larry. Keep up the great work
thank you bro!!
Thank you so much Larry. I think you've given me a tip to help repair my dodgy 1980s clippers. I will report back after I try
How did it change?
@@BacteroidGetToKnow It didn't. I've had them opened at least a dozen times and it just won't work. When you rotate the clippers up it shuts off but if you leave it horizontal is works. I've loosened, tightened and cleaned every inch of the damn thing and I can't work out what its problem is.
KillDeer what make is it?
@@BacteroidGetToKnow Its a Jherri Redding.
Great video, very helpful thanks
al mo your welcome 🙏
Larry. I took the blades off of my Wahl Clippers and later I found a spring on the floor, right below the spot where I was working. The problem is that I cannot find the area where the spring goes in the clippers. Can you please help me with this spring? I have a Wahl WC2, for household use.
OMG! Finally know how to get rid of the noise on my clippers!!
Great video Larry, keep the good work!
thanks mate!
Excellent, but what makes blades not to be sharp, even after trying many sharpening techniques,
Knowledge is indeed power.
Nice one idol
Hey LARRY THANKS for video.. Have so questions and if u could help and answer it would be nice.. Is there specs for each individual motor.. Like distance away to exert maximum power.. Basically is there chart, rules, specifications on how far the magnets should be away from each other?
Thanks bro
Given that this is a mains clipper and that you don't have to run it during adjustment I would strongly suggest that you unplug the clipper before you open it up so you do not run the risk of an electric shock.
Your right a certain amount of common sense should be exercised - great observation - thank you 🙏
the problem on the lever. is the washer starts to warp or bent due to bad maintenance hair behind it which wont allow it to rotate with ease mainly on seniors..switch the screw and problem fixed.. black casing wahls can be due to cross threading
Thank you Larry!
I have a wahl 300 why do you heat up from the first use do you have a solution for this problem please
how oiled are they?
I used her oil on the blades before and after shaving and it was very hot. What's the solution?
Guezzoun Noureddine hair oil? If that’s what you are saying that’s your problem right there - is that what you are saying?
I used the designated oil on the blades before and after shaving
Guezzoun Noureddine So its faulty electrics or the tension is to high in the blades,, no quick answer by text or without seeing it
Larry I love your videos, and they have helped me tremendously. my name is Joseph and I am in the state of Alabama in the United states. how much are u selling your blower for (in us dollars) and do you make them to run here in America or will I have to buy a converter.
They are made in the US by MetroVac, metrovac.com
How to stop overheating?
Will adjusting the arm decrease the heat coming from the unit itself? My Magic Clip is running quite hot and loud after a 3ft drop during a cutting session.
Wahl 300 or super taper?
Hi larry, my super taper being so loud, and the blade is not cutting. I have adjust the power screw on the right side, but the sound still loud. And i took off the blade to cleanup the blade, but the blade still not cutting/moving.
Larry do a complete service tutorial for Oster clippers like the fast feeds model and the 76 Titan and 10s model thanks m8
Where can I get the blower?
I mean where can I buy it
I adjust the power screw until is makes the loud noise and then screw it counterclockwise until it makes low noise??
My dear thanks for this ...but i have Wahl color pro ..what about it ? ...sound is very high ..how can i fix this problem ?
Thanks Larry the barber man you just saved me almost $100 fixed my clippers under your instruction :)
What do you call the specific screwdriver that has a star outer shape and a protruding dot in the middle ?
Torx security bit or driver.
My Wahl balding Blades dont moving and its noise.do U have an Idea?🙏
I need more details, has it ever worked, which country are you in, which county did buy it from, have you dropped it - give me a clue why it is the case...
@@larrythebarberman yes it always worked. i live in germany and bought it in germany no i didn't drop it.but now the Blades move again but its loud noise its 70db is this normal?
Is the clipper supposed to make that somewhat loud click when you turn it on? Mine does that too, but not all the time.
Sevader yes it is, it is just the sudden surge of power - it’s like starting car in the cold after being stationary for sometime
@@larrythebarberman appreciate the quick reply!
I appreciate u. Can tel me pls where I can find the machine to remove the hair with air, that u have a black one.tel me pls don't forget me.
What should i do on my clipper sir,when the lever is open the function is slow,when it is lever close the function is fast.. help please
hi I cant do this help me please
Why do the blades become misaligned when I adjust the power screw? The cutting blade shifts about 2-3mm to the right.
Philip Ampofo which clipper?
@@larrythebarberman wahl balding!
@@larrythebarberman Have the same issue with Wahl super taper. Messes up alignment when adjusting power screw.
Roo B the mis alignment can occur if you over tighten power screw - the blades can almost criss cross - hard to say for sure without seeing them
@@larrythebarberman Thanks Larry. I've sent the blades of to be sharpened, so when I get them back will check again to see if I had been over tightening them. Cheers.
The Wahlqualizer 😁👍
Larry the don ☝️💪
What is the name of that air gun??
Hi Larry, love the videos!
I have a problem with my Wahl Icons, when I adjust the power by tightening the screw that you can see when the face plate is on until it makes a noise then loosen it, the cutting blade is too far over to the right which when using a comb attachment hits that and make a noise. Would adjusting the tension arm sort this problem?
Thanks for you help.
Ollie Wood no!! In that case turn the screw in the complete opposite direction all the way...
Larry The Barber Man the screw that you can adjust when the face plate is on or the two you can see when the face plate is off?
Ollie Wood power screw assuming blade screws are even
I find the super tapers in general are a little bit on the rattly side. Even when the power screw is adjusted correctly.
Can I do this on my Wahl legend?
Mr. Larry sharpening clipper blades cut hair better
Jeremiah Singh this is true, but with poor tension and poor power sharpeness will not help
Oh thanks I am from Guyana great vid u should upload more tips and tricks
this is why now I like rotor motors now on my clippers because there's no issues at all
Here you can fix it yourself, if the rotory has issues you can throw them away.
Fred locker ?
william otto lol 😂 Thread locker !!!
how can I make my clipper(whal super taper cordless) more stronger????????
REPLY
6:42 when you tighten to put
2 pounds tension, did you tighten both top and bottom screws or just top?
You have to tighten both as they hold the armature in the correct position. If you only tighten one then it could come loose and pivot on the screw making your 2lbs adjustment a waste of time. Tightening both locks it in place.
Hi Larry, thanks for the great video. Regarding what you mentioned about the blade gap, which affects the performance - I am having this issue with the Oster Fast Feed. I've noticed that when I move the lever to the blade's closing position, the metal track controlled by the lever will also tilt in an upward motion, which causes the guard blade (screwed to the metal track) to also lift - causing the gap between the guard blade and the cutting blade. As that happens, there is also rattling sound. I suspect this comes for the gap as the moving cutting blade is hitting the stationery blade. I've no idea how to solve this problem.. I love this clipper but now my fast feeds are constantly pulling and snagging hair. Your help and experience would be deeply appreciated!
Fixed it! Inserted small paper cutouts to fit into the linings. It works now!
huyload
gooo man
@larrythebarberman what brand is the pressurized air blower and where can I get it from? cheers
Nathan Williams Just search for electric air duster. I got this one and it's awesome
Xpower Airrow Multi Use Air Duster with 2 Speed Air Flow Control www.amazon.co.uk/dp/B01EN8QQVG/ref=cm_sw_r_cp_apa_XJRPzbE6KX6V8
He closed the blade to zero at the third try. The second try was in between open and closed clipper level. See for your self
u never oiled the blades at the start m8t bit unfair that
2009bigchief I think I am missing something
@@larrythebarberman well if he oiled the bladed at the start they would have been different .he got the cutters and cut the hair then pulled them apart cleaned them then oiled them and low and behold they cut fine
2009bigchief it may have made a little difference, but not a big enough one, to warrant you taking exception to this minor thing - I make much bigger mistakes than that
@@larrythebarberman im only saying tbh the blades may have not made that noise if was oiled at the start
@@2009bigchief the noise could have been reduced easier by adjusting the power screw if i wanted to trick the viewers
Hey thanks for this video, could you make an update for the cordless wahl seniors? The inside is not the same ruclips.net/video/pcduQNuY_hg/видео.html (this video show the interior)
dont forget to unplug them before opening 😂
My customers are complaining that my clippers are pulling there hair
Did you fixed it with this video?
Why do my wahl icons get so hot brand new
probably lack of oil
I bet loads of people buy a new one thinking their all broken ..
Bla bla
I have a fix...buy better more powerful clippers
That's not hair from any human...
jaye see no it’s sea otter hair which is the thickest and strongest hair/fur in the world so that just shows you how kick ass this demo is!!!