Was in a Diamana D+ limited 6X prior to this season in stealth plus playing at 44.5” but this season switched back to Titleist TSI3 and was fitted with UB 6X cut down to 44.5” and it’s a fwy finder. The dispersion was extremely tight ball flight was very consistent and long. Feel was absolutely amazing. Tried the Ventus 6X blue and to me it just wasn’t as tight as liked it to be. UB just fit everything I was looking for.
Amazing video...been waiting for this video for a long time. I wish they included the VR shaft in there as well as the profile is rated at 3+ | 2+ | 3 (handle to tip), which is a stiffer IZ and would match Ian's profile. Maybe another comparison video with Mikey hitting all the GD shafts to see which ones are better suited for him vs the ones that were better suited for Ian?
great video! would have liked a little discussion on the TX vs X flex with Tour AD shafts. I think the X is more like a Stiff+ and the TX is a true X/X+ in comparison to other vendors. i use a HD 7TX in my 3W and absolutely love how it loads, the color match with with Sim2 Ti and the tight dispersion. the HD is really is an underrated shaft.
I got the same shaft in stealth plus tipped .25 of an inch on both butt/tip, it has the blue face . Looks so clean but the shaft performa even better🔥 underrated af i love it! Everyone plays ventus😂
The TP!!!! I got fitted into this one at a PXG fitting. This is a monster shaft. Feels like the Diamana ZF (GT) at impact (if you’ve never experienced a ZF at impact you need to…BUTTER) spun a little less and tightened my dispersion. TP4life (most likely a month)
I’ve been looking forward to this one since Ian first floated the idea of a big Graphite Design roundup a long time ago! I’ve played all of these shafts but the CQ and new VF. My favorite Graphite Design driver shaft is the HD. I like blueboards and find it to feel like it’s in a somewhat similar neighborhood to the Fujikura Speeder NX Blue. That strong mid kick just syncs well with my swing. Typing this as I’m watching the video, so I’m eager to see what Ian says about it the HD. Also love the DI and UB in fairway woods! I have a DI 8X in an Apex UW and it’s a fantastic combo. The XC is the only one I didn’t like, purely because that super-soft handle just didn’t suit my swing. Two that might not be “current” but shouldn’t be slept on: the VR has a very slightly higher balance point, which I found made it a great pairing with a Ping driver head. Loved it with the G425. And the TP is one you can get for only $125 USD through Callaway right now, which is really a steal.
Having watched the full video now, glad to see Ian did well with the HD! The only comment I maybe didn’t quite agree with is the brief comparison of the UB to the XC, though Ian was really just referring to butt stiffness there. To me, the UB feels and perorms much more like an updated DI - slightly firmer throughout and newer materials, but a very similar profile. (Medium/medium/stiff in the DI, medium+/medium+/stiff+ in the UB.) Great video!
Ian and Mikey bringing the heat once again! This video is 🔥. Both the UB and XC are excellent fits for in my TSR 3 driver and 3W. Keep up the great work gentlemen!! 🙌👍👍🙌
Love this video, and have wanted it for a while! I've become a bit of a Graphite Design fanboy, starting with the DI in my SIM UDI driving 3 iron, and recently with the BB in my 3 wood. The BB8x I've got in the 3 Wood, while being a LOT of shaft, it's a BOMBER that has given me a bit of baby draw, and 20 extra yards consistently (while not ruining my gapping). I've loved my Tensei Orange in my driver, but I'm totally eyeing a Graphite Design to replace it... as soon as I have an off day, hahah.
Love this test guys. I'm very similar to Fras and the DI works in 7x tipped 1". The UB and IZ are better in 6tx than 6x. Thanks for the excellent content.
Great video. Please do a review and comparison of the GD Tour AD 55-115 Iron shafts? I'd like to see how they compare to Steelfiber and MMT. Thank you..
OK from here on out, we can all picture the shaft. You guys are talking about in our minds, but Mid and tip number number number this is gonna make it much easier for us understanding what shaft characteristics you’re talking about
I have the cq in my driver and fairways 3 and 5 in the driver it’s tipped 1.5” and that really helped me with my dispersion the fairways are untipped it’s an amazing shaft if setup correctly
What’s interesting is I was at Roger Dunn in Monrovia California and I bought or was about to buy a tailor-made burner and it happened to have a tour -6 shaft and it had a price tag of $55 and so I bought it and then the staff saw it and said that was mispriced😂😂. They honored the price and let me walk away with essentially a total of a $350 club.
Had a Ventus Black 6x and it broke so I used a shaft from the club and I quite liked it. Ping Tour silver 65s. Obviously anything will feel more active than a Ventus Black but it was a nice change. What Tour AD model would be most similar to that Ping Tour 65S I tried?
YES! Been begging for this (selfishly!) for a long time. I play the AD UB 6x in my TSR3, AD DI 7x in TSi2 3 wood, and AD IZ 85x in my TSR3 hybrid. Thank you. 👍👍
@@TB-vz3oj the Ventus TR Blue feels more stable and less lively. The UB feels more explosive with a home run ball in it; feels like a slightly more stable version of the DI (I played the DI in the past). But the UB seems to get a little more offline. I am back in the TR Blue again!
I’ve always wondered, and not sure if this video really answers it, but do shaft companies have a “base model” that they tweak for different weight/flex categories? Or do they really make each model unique? For example, do they prototype/design a 65g stiff and then add/remove weight and materials to make it a 65x or 70 regular?
Still play the M9003 6x and 7x in the driver. The P9003 8tx in a fairway, not sure why the profile and colorway has never been updated. Such a damn good series of shafts.
I have a Mitsubishi Fubuki K 70 series shaft that I've used in a couple different 3 woods, it just performs way better for me than the stock shafts that came with the clubs.
The video I was after 🙏🏼 I game tsr3 set at 9.25 degree with Hzrdus black 6.5 shaft and use pro v1 ball. I spin at around 2800 on a good strike hitting 1-2 up. What shaft do you recommend to try to drop the spin
I’d love to see a video of testing these against what we average golfers would game off the shelf. Maybe a series of standard Ping shafts compared to Tour AD and so on. I play a G425 SFT with a Tensei orange 60-65 Stiff and have had good results. I built a Riptide small batch 50g Stiff and loved it and was able to make great contact and carry 295 with fairway hits at 55%. I’d love to get that percentage up but golf is hard. It’s so daunting to pick a shaft with all the data out there. Is there any chance you guys can make a video that shows the comparison of these offerings?
Love this video. It is like you were checking my search history. I have the AD-IZ6 in my TSR3 driver and it is a beast for me and extremely consistent. However, I have stock shafts in my fairways (Stealth +) and can't keep those on the planet. I plan to get fit for fairways soon, but given this info what would be good fairway options? I have never used premium shafts in fairways or hybrid. Love Graphite Design, but am open to others.
Same lol spent the past 48 hours reading as much as I can about GD and blind bought the HD. Tried it out today and felt great! And I come back home to them uploading the video and HD turns out the best makes me feel better.
Nice review. Where would you rate the stiffness profile for the AD-BB6s? It’s been my gamer for the past 10yrs starting with the Taylormade Jetspeed now in my M6.
And then everyone moans about how he’s stuck on his back foot and does XYZ wrong. It’s impossible to please everyone. We just have to make the testing as consistent as we possibly can so the results reflect the differences in the product not the differences from swing to swing.
I have the GOAT Tour AD DI 6s on my TSR2 - went for the Black and White colourway to match up with the driver head better. Fantastic shaft, very stable and consistent 👍
Interesting that I do not see the AD-VR included. Has this model already been discontinued. For me it’s very similar to Diamana and Speeder lineups, particularly Diamana TB and Speeder NX. Quite very firm in handle, moderate midsection and firm at tip. The firm handle and softer mid & tip offers phenomenal feel while it’s still stable enough to be confidence inspiring. I tried the 5X version on launch monitor but struggled a bit on dispersion and high launch. I then tried it in my 3-wood. Worked flawlessly. I ended up in the Speeder NX 60TX but GDI VR was really impressive, as was Diamana. I’m a feel player so really appreciated the VR, especially compared to the Ventus Blue and Blue TR
Hi guys, I’m currently using this setup: Fujikura Air Speeder 40R and Callaway Triple diamond night mode 10.5, i play it at 44.5 inch, C6.5 My swing speed is 95-99mph, i tend to hook it a lot, fly the ball low and have low spin usually
Other than the new VF and the now old GP, the GD shafts all play pretty soft Other than the classic DI you don’t see too many GD shafts on your probably bc they are softer. I’m assuming they have a bigger presence on the Japanese market
Nice video! This type of videos is what made the channel, not the “best of” series (are you trying to compete with mygolfspy? Their approach is silly, nothing worth copying). BTW - if you were to formally test the differences between each shaft performance, I’m pretty sure that you wouldn’t be able to tell apart performance difference from randomness/noise - standard errors are too large for sample size!
RUclips needed this one. Community service here.
Graphite design is one of those companies they always have the feels but it's often overlooked.
Instant all-timer, by request from a few lives over the last couple years and the lads delivered!
Tour AD DI has to be my hands down favorite shaft model
A "best of" Shafts for Ian would be interesting. Ventus, GD, Diamana, etc.
Just got a refit done on my driver and ended in the HD. It was so good
Just got fitted to the HD 6X yesterday. Cant wait to get it and try it on the course. Amazing feeling shaft.
Same here! AI smoke triple diamond. I actually put 7x in my 3 and 5 wood also. So excited to game them.
techy club building/testing content is why i love ya’ll! Killin the game!
Would be good to see comparison of the older models that are still valid and in play like BB, GP, GT, MJ, MT, TP, etc
ad tp and ad gp are my favourites
The IZ and the DI are oh so good!
Mikey twirling that wrench @6:58 needs to be talked about
Was in a Diamana D+ limited 6X prior to this season in stealth plus playing at 44.5” but this season switched back to Titleist TSI3 and was fitted with UB 6X cut down to 44.5” and it’s a fwy finder. The dispersion was extremely tight ball flight was very consistent and long. Feel was absolutely amazing. Tried the Ventus 6X blue and to me it just wasn’t as tight as liked it to be. UB just fit everything I was looking for.
Best Video so far!
Amazing video...been waiting for this video for a long time. I wish they included the VR shaft in there as well as the profile is rated at 3+ | 2+ | 3 (handle to tip), which is a stiffer IZ and would match Ian's profile. Maybe another comparison video with Mikey hitting all the GD shafts to see which ones are better suited for him vs the ones that were better suited for Ian?
I have the VR 7TX in my 5 wood. The best set up I’ve hit in a FW wood.
Great review! Loved this series! You guys should do one for all the 6 Velocores!
Loved this one, fellas. Maybe now one on the ventus line up? Regular vs TR version?
I have the IZ in my sim 2 max it’s a bomber
Been waiting for something like this!
Wonderful. I use the IZ and the DI but I have no idea what data I'm producing. Would be nice to fly up there to get fitted!
great video! would have liked a little discussion on the TX vs X flex with Tour AD shafts. I think the X is more like a Stiff+ and the TX is a true X/X+ in comparison to other vendors. i use a HD 7TX in my 3W and absolutely love how it loads, the color match with with Sim2 Ti and the tight dispersion. the HD is really is an underrated shaft.
I got the same shaft in stealth plus tipped .25 of an inch on both butt/tip, it has the blue face . Looks so clean but the shaft performa even better🔥 underrated af i love it! Everyone plays ventus😂
The TP!!!! I got fitted into this one at a PXG fitting. This is a monster shaft. Feels like the Diamana ZF (GT) at impact (if you’ve never experienced a ZF at impact you need to…BUTTER) spun a little less and tightened my dispersion. TP4life (most likely a month)
I’ve been looking forward to this one since Ian first floated the idea of a big Graphite Design roundup a long time ago! I’ve played all of these shafts but the CQ and new VF.
My favorite Graphite Design driver shaft is the HD. I like blueboards and find it to feel like it’s in a somewhat similar neighborhood to the Fujikura Speeder NX Blue. That strong mid kick just syncs well with my swing. Typing this as I’m watching the video, so I’m eager to see what Ian says about it the HD.
Also love the DI and UB in fairway woods! I have a DI 8X in an Apex UW and it’s a fantastic combo.
The XC is the only one I didn’t like, purely because that super-soft handle just didn’t suit my swing.
Two that might not be “current” but shouldn’t be slept on: the VR has a very slightly higher balance point, which I found made it a great pairing with a Ping driver head. Loved it with the G425. And the TP is one you can get for only $125 USD through Callaway right now, which is really a steal.
Having watched the full video now, glad to see Ian did well with the HD! The only comment I maybe didn’t quite agree with is the brief comparison of the UB to the XC, though Ian was really just referring to butt stiffness there. To me, the UB feels and perorms much more like an updated DI - slightly firmer throughout and newer materials, but a very similar profile. (Medium/medium/stiff in the DI, medium+/medium+/stiff+ in the UB.) Great video!
Ian and Mikey bringing the heat once again! This video is 🔥. Both the UB and XC are excellent fits for in my TSR 3 driver and 3W. Keep up the great work gentlemen!! 🙌👍👍🙌
These guys are the best!!
Would love to see videos of fitting of us folks with slow swings.i think there might be some significant gains to be had.
I think Fraz is due for another super speed training!!
I think the GP is my favorite of all time in the GD lineup. Very good shaft.
Love this video, and have wanted it for a while! I've become a bit of a Graphite Design fanboy, starting with the DI in my SIM UDI driving 3 iron, and recently with the BB in my 3 wood. The BB8x I've got in the 3 Wood, while being a LOT of shaft, it's a BOMBER that has given me a bit of baby draw, and 20 extra yards consistently (while not ruining my gapping). I've loved my Tensei Orange in my driver, but I'm totally eyeing a Graphite Design to replace it... as soon as I have an off day, hahah.
Love this test guys. I'm very similar to Fras and the DI works in 7x tipped 1". The UB and IZ are better in 6tx than 6x. Thanks for the excellent content.
Great video. Please do a review and comparison of the GD Tour AD 55-115 Iron shafts? I'd like to see how they compare to Steelfiber and MMT. Thank you..
OK from here on out, we can all picture the shaft. You guys are talking about in our minds, but Mid and tip number number number this is gonna make it much easier for us understanding what shaft characteristics you’re talking about
Got one just like that one...di 6x... and I still hit it at 71 year old.... love it...😊
great video. really informative about how the profile translates into feel.
I have the HD in my Driver and DI in my 3 wood and 3 hybrid.
I have the cq in my driver and fairways 3 and 5 in the driver it’s tipped 1.5” and that really helped me with my dispersion the fairways are untipped it’s an amazing shaft if setup correctly
What’s interesting is I was at Roger Dunn in Monrovia California and I bought or was about to buy a tailor-made burner and it happened to have a tour -6 shaft and it had a price tag of $55 and so I bought it and then the staff saw it and said that was mispriced😂😂. They honored the price and let me walk away with essentially a total of a $350 club.
Had a Ventus Black 6x and it broke so I used a shaft from the club and I quite liked it. Ping Tour silver 65s. Obviously anything will feel more active than a Ventus Black but it was a nice change. What Tour AD model would be most similar to that Ping Tour 65S I tried?
Some of the older premium shafts are still top performers. I am a huge fan of Diamana Kai’li 70S/80S I have in my Callaway driver/4w.
UB 8 & 9TX are the best I’ve ever played! Diamana guy for years.
Finally!!!!!! You needed the TP and possibly VR in there but all good. Iz is close though
YES! Been begging for this (selfishly!) for a long time. I play the AD UB 6x in my TSR3, AD DI 7x in TSi2 3 wood, and AD IZ 85x in my TSR3 hybrid. Thank you. 👍👍
How does the UB 6x compare to Ventus TR blue? Which is longer for you and which is stiffer? Thank you.
@@TB-vz3oj the Ventus TR Blue feels more stable and less lively. The UB feels more explosive with a home run ball in it; feels like a slightly more stable version of the DI (I played the DI in the past). But the UB seems to get a little more offline. I am back in the TR Blue again!
@@johnverheyen812 wow I see, back with the TR. Okay thanks for the information. Appreciate it!
I’ve always wondered, and not sure if this video really answers it, but do shaft companies have a “base model” that they tweak for different weight/flex categories? Or do they really make each model unique? For example, do they prototype/design a 65g stiff and then add/remove weight and materials to make it a 65x or 70 regular?
Still play the M9003 6x and 7x in the driver. The P9003 8tx in a fairway, not sure why the profile and colorway has never been updated. Such a damn good series of shafts.
I saw you guys are finally opening a location in Vancouver! Who are the fitters there?
Mikey, you said Diamana TB is all-time best in the driver...if you love it in your driver, would you put it in your 3 wood? (generally speaking)...thx
Just started using the orange DI and I’m bombing it
I play the F-65 in 3 and 5 wood, I’m guessing the CQ or IZ is probably the best match in driver?
I have a Mitsubishi Fubuki K 70 series shaft that I've used in a couple different 3 woods, it just performs way better for me than the stock shafts that came with the clubs.
I still have a BB shaft on my drive.
Can I ask what jacket that was? This is why I invested in a high-quality Arc’Teryx rain jacket. I don’t ever want to wet out when it’s cold
The video I was after 🙏🏼 I game tsr3 set at 9.25 degree with Hzrdus black 6.5 shaft and use pro v1 ball. I spin at around 2800 on a good strike hitting 1-2 up. What shaft do you recommend to try to drop the spin
I’d love to see a video of testing these against what we average golfers would game off the shelf. Maybe a series of standard Ping shafts compared to Tour AD and so on. I play a G425 SFT with a Tensei orange 60-65 Stiff and have had good results. I built a Riptide small batch 50g Stiff and loved it and was able to make great contact and carry 295 with fairway hits at 55%. I’d love to get that percentage up but golf is hard. It’s so daunting to pick a shaft with all the data out there. Is there any chance you guys can make a video that shows the comparison of these offerings?
How about the Tour AD VR?
The VR doesn’t get enough love. Such a great shaft!
@@bekingulube2689 couldn’t agree with you more! Such a great shaft in the Tour AD line up.
VR , TP and the BB (oldie but goodie)
@@greyteo TP is another one that still performs well.
If dynamic lie is flatter, does that lead to a bigger fade miss?
And conversely, does a stronger tip & upright dynamic lie.. lead to more hooks?
I actually have a di shaft n its amazing why is it so good
Is there any difference in how they perform with Fairway woods or is it very similar?
Just wondering if there would be anymore thing similar to a TZ5 60 m4
Love this video. It is like you were checking my search history. I have the AD-IZ6 in my TSR3 driver and it is a beast for me and extremely consistent. However, I have stock shafts in my fairways (Stealth +) and can't keep those on the planet. I plan to get fit for fairways soon, but given this info what would be good fairway options? I have never used premium shafts in fairways or hybrid. Love Graphite Design, but am open to others.
Same lol spent the past 48 hours reading as much as I can about GD and blind bought the HD. Tried it out today and felt great! And I come back home to them uploading the video and HD turns out the best makes me feel better.
Nice review. Where would you rate the stiffness profile for the AD-BB6s? It’s been my gamer for the past 10yrs starting with the Taylormade Jetspeed now in my M6.
I'm not sure if I missed this, but were any of these shafts tipped?
What would be the newest replacement for the Tour BB?
We’ve been wanting this for a while, wasn’t cq meant as a fw shaft? Next up ventus line up
We need Mikey hitting these different shafts, his swing is like the majority.
And then everyone moans about how he’s stuck on his back foot and does XYZ wrong. It’s impossible to please everyone. We just have to make the testing as consistent as we possibly can so the results reflect the differences in the product not the differences from swing to swing.
Great test
A in-depth look at VA composites line would be good to see
I have the GOAT Tour AD DI 6s on my TSR2 - went for the Black and White colourway to match up with the driver head better.
Fantastic shaft, very stable and consistent 👍
Great ones guys forgot the TOUR AD TP would have fit nicely for IAN firmer DI
I had the VR and it had high fliers at times since was only a 70s
Interesting that I do not see the AD-VR included. Has this model already been discontinued. For me it’s very similar to Diamana and Speeder lineups, particularly Diamana TB and Speeder NX. Quite very firm in handle, moderate midsection and firm at tip. The firm handle and softer mid & tip offers phenomenal feel while it’s still stable enough to be confidence inspiring.
I tried the 5X version on launch monitor but struggled a bit on dispersion and high launch. I then tried it in my 3-wood. Worked flawlessly. I ended up in the Speeder NX 60TX but GDI VR was really impressive, as was Diamana. I’m a feel player so really appreciated the VR, especially compared to the Ventus Blue and Blue TR
AD CQ D/3 - AD HD UW - Best shafts for me.
F J B
Which shaft in the current lineup is most similar to the VR6?
Would be nice to test this out with higher ball speeds
Would have been a plus to add the VF to the group with the swing of the day for better comparability. Other than that, this is good stuff.
Still using mine and still outperforming all other shafts i have tried.Its that old it looks older than the ones you are showing here.
Club champion ftw
What do you guys think about the VR?
Hi guys, I’m currently using this setup: Fujikura Air Speeder 40R and Callaway Triple diamond night mode 10.5, i play it at 44.5 inch, C6.5
My swing speed is 95-99mph, i tend to hook it a lot, fly the ball low and have low spin usually
Would have loved to see the TP thrown on the mix
Wow very nice video
@Ian Fraser I was between m9003 and gp tx for awhile. HD was too sloppy is The VF or Xc what I should look at? I'm in 757 evo6 TX right now.
Definitely VF Scott.
@@clubchampionmedia thanks guys I'll have the lads send one over.
One of these days I’d love to see you test a nventix nunchuck. No flex
Mikey on the wrench is elite
Did you use 6s or 6x?
I think your demographic would be very interested if you did the same test with a 3 wood!
Something went wrong? Was the video taken down?
I want a high launch mid spin hybrid shaft stiff no more then 70g
Why not test the TP? Can you give a comparison of it vs one of the ones you did test
It’s no longer part of their current line.
@@clubchampionmediadid not realize that thank you…
Why is Ian saying the butt soft shaft has the most feel? I have always thought the smooth profiles are midsoft shafts like Diamana Blueboard?
I heard the $25 G-TECH Graphite Design budget shafts are really good!! Anyone have experience with those?
I hope all the hard headed people in here heard the phrase “shafts dont spin” in this video.
🙏🏻
@@ianfrasergolf the amount of flak I get for sharing that opinion, online and in person, is insane 😂
Other than the new VF and the now old GP, the GD shafts all play pretty soft
Other than the classic DI you don’t see too many GD shafts on your probably bc they are softer.
I’m assuming they have a bigger presence on the Japanese market
That launch monitor set down wind or firm ground the run out numbers for ball swing and swing speed are 10 yards exaggerated
GD “Pershing” hall of fame’r. 2006 bomber!
Nice video! This type of videos is what made the channel, not the “best of” series (are you trying to compete with mygolfspy? Their approach is silly, nothing worth copying). BTW - if you were to formally test the differences between each shaft performance, I’m pretty sure that you wouldn’t be able to tell apart performance difference from randomness/noise - standard errors are too large for sample size!
HD shaft must be sweet
Softer shafts Ian could time them and actually get lower spin even when it said mid spin
Just picked up the orange d1 7x for my 7 wood. Feels incredible
timestamps would be sweet for this test :)
Please do the same with the other brands (Mitsubishi, Fujikura, etc) ❤
I just picked up a tour ad di for my 3 wood. I don’t think anything will make me replace the hzrdus black smoke in my driver
Surprised no adi bb