The fact you also explain aftermarket stuff like splicing the halo wires into the proper wires is beautiful Seems like an easy job, but I’m sure my old girl gonna give me more issues
I noticed you didn't use a load bar to reduce volts for LED. My lights assembly came with the load bar. I don't understand how to connect them. Can you help?
Please help me ..my led lights is almost the same is that ones ..but my ones have 2 black wires from the lower beam ..and 2 green wires from the higher beam .So I don’t know how to connected..they come whit istrucions but they don’t specifically correct
this is hard way to remove headlamps. turn signals yes. there are 4, 5mm long studs at the top of the lamp remove the two studs on each side and the light comes out. at least on my 1993 k1500 that is how I did it. otherwise good info.
They are garbage they are what I call a t tap they are not made to be used on vehicles most idiots use these cause they don’t know what they are doing..
The fact you also explain aftermarket stuff like splicing the halo wires into the proper wires is beautiful
Seems like an easy job, but I’m sure my old girl gonna give me more issues
thank you TRQ LOOK GREAT ON MY 1998 GMC C1500 ONLY 120,000 FIRST TIME OWNER AND EASY 30 + YEARS TOO GO =)
1988 and 1989 are different. You need to make a video on that or correct your years....
No reason to remove the grill or the whole mounting bracket. Just pull the two pins up top and be done with it.
Hello does the day running lights still works with this assembly?
I noticed you didn't use a load bar to reduce volts for LED. My lights assembly came with the load bar. I don't understand how to connect them. Can you help?
Please help me ..my led lights is almost the same is that ones ..but my ones have 2 black wires from the lower beam ..and 2 green wires from the higher beam .So I don’t know how to connected..they come whit istrucions but they don’t specifically correct
Nice job!!! I'm ready to do mime 1996 chevy 1500 thank you!!
What is the bulb size for the high beam and low beam lights on these halo kits
By any chance u know the size of the bolts/screws to mount the headlight to the frame?
this is hard way to remove headlamps. turn signals yes. there are 4, 5mm long studs at the top of the lamp remove the two studs on each side and the light comes out. at least on my 1993 k1500 that is how I did it. otherwise good info.
My 89 k1500 lights are not one peace there separate will these work on my truck
The other 2 screws on the headlight what is that? Not the adjustment that you covered
Forgot the step about taking the brush guard off.
what kind of connectors are those? for the wires
They are garbage they are what I call a t tap they are not made to be used on vehicles most idiots use these cause they don’t know what they are doing..
What about the seald beam lights?
Фары 🔥👍
💯
VERICLE
for anyone doing this swap, don't use scotch locks like he did...smh
and using a power tool to bolt your grill back in is also a bad idea, use hand tools, avoid cracking plastic
Sorry my truck is way different