GO SOOTCH!!! I've even gotten my old man who's 64 into watching your vids!! On top of awesome vids and gear, you have the commonly overlooked "genuine-factor" that many reviewers either miss or just don't have to start with. The bloopers at the end are funny as hell, and let's us know your human. No matter how much gear, cameras, views, etc. there are attached to a person, at the end of the day, we are all just human. Mannnnn...I know I'm gonna prolly catch hell in the comments for that last sentence being a little too philosophical...😕. I was just trying to say You, Hickok, and Nutn are a lot of our favorites because your not super "try-hards" or inanimate "tacticoooools". You come off as a genuine and pretty cool guy. That being said, there ain't nothing wrong with a genuine dude getting to rip off some rounds with some badass gear! Long live the 2nd-A, the Republic, AND the channel of the Sootch!!! Peace brother.
Where I see this being a huge benefit is if you're military and loading hundreds of mags on a range day, but I'm lazy and even if I were only loading 2-3 mags, I'd still pick up one of these.
I keep the maglula in my range bag- both the pistol loader as well as the AR loader you showed in this video. They are fantastic and a lot less expensive than this full size version. A lot easier to throw in a backpack! I’ll stick with the small one. It’s pretty fast!
As a native South Carolinian, Iraq Veteranx3, and current active duty Soldier/MP I'm extremely proud to see that Team SOOTCH leads the way when it comes to conveying accurate information and professional videos that are entertaining as well. Keep it up SOOTCH!
Where have I been (The VA, I think?) I have a couple of the Maglula small AR speed loaders but now I must have one of these. Since I reload I can afford to shoot copious amounts of 5.56 ammo. I usually take 10 each 30 round mags out with me so I sure can see the value in this product. Thanks man for the demo video. As always you put out a primo product.
I love watching all your videos even the ones you made prior. I had automatically like this one before I got a chance to watch it fully just because of the music you’re playing at the beginning sounds like a little bit of AC/DC.
7:51 I'm an engineer and it cracks me up you would use anything to right of the digit. yet you timed it to the 100th of a second! I think rounding to the nearest second would make the point... just poking fun at you. I watch your videos all the time and love your presentation, enthusiasm, and knowledge. Keep going!!!!
Hay good evening , nice review !!! use my buddy's a few weeks ago n had to get one wow its fast glad I got one !!! hands down way faster compare to loading by hand, thank you!!! keep the vids coming!!!
For the 10rd mags, you could stage 30rds on the loader and load 3 mags before refilling the loader. And for the 40rd round mags you could load 30rds then 10rds.
It's a faster Than loading them by hand,but still a lot slower than the magpump where you can just stick the magazine into the mag well of the loader,dump the ammo in and go and just start pumping.
Very nice demonstration. People complain about the price of the product for $130/- !!! How much does it cost to shoot a box of Ammo? The price you pay is for the innovation and utility of the product in my humble opinion.
Well if you have relatives fighting overseas, knowing that sending them a dozen of this will make them sustain that firing rate at their enemies, could save their lives you never know, then usd 133 is a steal then imho
Also can't forget that on some AR mags, it's easy to lose count on how many rounds you've just put in your mag. Not all mags have a way for you to tell. With this, you know you have 29.
😆HaHa!!! Antonio, I just ordered the RRS with my name on it so it was $50+shipping, haven't received it yet but should have it b4 long. I'm sure I'll be happy with the RRS speedloader but I just love the smaller size of the Maglula. I guess the price tag makes up for the size😂😂👍
cool but i don't shoot enough to justify any of these $120 loaders out there. i'd rather buy 8-10 extra mags to bring out and load with my little $30 lula to save my thumbs, i just load while i'm watching a hockey game or something and take 20 mags in a dry box to wherever i'm shooting
Spot on for those who shoot on their own, no reason at all for something this expensive/nice. I love mine because I teach shooting and it simply speeds up the class by getting them back on the line twice as fast. Makes reloading at the bench a nothing deal.
These were pretty cool until I looked at the cost... Then I got a Podavach U-loader for $40 and I was happier because it takes 3 Calibers and a lot of magazines.
Maglula is known for its quality---Not sure about Padavach but in 2020 they're just about $70 so not that great a savings over the Maglula at this point in time.
$133 is what i find them at. It takes a special kinda a person to buy one easy as it is to load an AR mag. It costs $120 to load just 10 mags which can be hand loaded in 10 minutes. You would have to be pretty well off just to buy the ammo and mags to pretend it was worth buying the Maglula. Thats my thoughts on it, which are free,,,
Well, it's truly expensive, but if you're tired of loading by hand, or just want to make it faster, it's a good investment. These things are also pretty robust, so they last for a good while.
Another great review Sootch00, but I don't shoot that much ammo through my AR-15. Maybe only 250 rounds a month. Also me and my cousin shoot each others rifle too. So I prefer the old way with my hands.
Sootch, I like the design of this loader. Less bulky than the board you reviewed way back. Easy to transport and will fit in most range bags. Seems to be very practical. How is it holding up if you don't mind me asking? Maglula, is typically a high quality product but I have to ask. Thanks for the vid as always.
@Hexaquan No. However, they do make special "star" mags that are California compliant. It's a cluster of five 10rd mags all joined together at the base. They're not cheap, but they definitely do the job.
The last mag loader test I saw, you compared the loaders' load times against a standard MagLula, and your times were in the low 30's, as I recall. Yet here you compared against only hand loading a mag. Was the time for loading with a standard MagLula to close to (or better than?) the MagLula bench loader? (i.e., the bench loader didn't look good at $130 vs. $30 for the little loader?) Seems like too obvious an omission.
Not accusing you of such; I guess the intent/tone doesn't come through in text. It was just such a noticeable omission that I was trying to guess why the comparison wasn't made.
Thanks for the reply and my apologies for the sharp tone. Too many trolls around getting me fired up! lol! I posted loading a mag with the Lula on FB along with extras footage using the MagPump. I'm planning a video on the AR15 Lula and Striplula coming up.
@A E True, it's probably $5 in materials. But how many tens of thousands of dollars did they spend to have the mold made for it? There's more that goes into it than just the material costs. Part of the profit goes toward recuperating the R&D cost, as well as the cost of having the tooling manufactured to produce the item.
@@crazyfvck Good point. There are also many many other overhead expenses that are taken care of by the $127 profit that A E was claiming, like payroll, insurance, employee benefits, lawyers, accountants, security, and simple utility bills (electricity, water, gas) just to name a few. At the end of the day, I am 110% sure that there is a lot less profit than $127.
@@dizzzave357 Far much more than half of everything we use here in the USA is made outside of our Country (tools, cars, computers, cell phones, household appliances, clothing, AMERICAN FLAGS, etc. etc.). I get the whole "Be American, Buy American" thing, and I do as often as possible, but, how many of the products we use on a daily basis are made in communist countries like China, or even in other countries that absolutely HATE our Country, like Venezuela??? Citgo gasoline stations are owned by the Venezuelan government. Capitalism is not just an American thing, it's a global thing. If you can find a legal way to take someone else's money, why wouldn't you???
You might not, but perhap a gun range that earns money by having people shoot does...or a club doing some sort of evening shoot etc.etc. etc. - at least they thought of it. As the old saying goes 'Tis better to have and not to need it, than to need it and not have it' :)
Okay I've watched a couple of the videos. My question is this, that magazine with the lion I think? is that custom? Or is that something that can be bought?
Hey Sootch I'm curious why you have not been testing these mag loaders with ETS magazines... 1 of the reasons why I purchased ETS magazine's was because of your review on them... more importantly I'm curious if they will work with ETS mags
Trevor Spencer Hahaha yeah right! You probably load all five of your mags at your little indoor range and shoot at a paper target. Then go home feeling like you know your rifle and how to fight with it.
soooth! i was waiting for you to test what is fastet between the orig 1 that goes side to side and this new 1. i feel lime there org 1 is faster because you dont have to line the bullets up u just go right in. if its not faster im guessing its the same
Nice video! I've watched you for years, but I was a little slow on this one. Could your ending catchphrase be partly inspired by Joshua chapter 1 verse 9? Either way I love it!
sootch I bought a striplula by maglula and I highly recommend it. I have yet to see any of the big review guys to do a review. check it out I'm sure you will like it
You can pretty much compare raw materials cost vs retail to anything in the world and come up with a reason it's a ripoff. You can also wait for China to ignore the patent on a design and pay half as much.... I choose to pay the actual craftsman, but that's up to you.
It's a business the entire point is to make a profit. Materials are just one aspect of it. You forgot about research and development, manufacturing, marketing, sales, distribution, shipping and logistics, warehouse employees property fees for storage.......I own a business and people always want a deal but don't think about your costs.
Nothing is overpriced if people are willing to pay for it. Their mag top loaders are what, 30-40 bucks? Sure, its a few ounces of plastic, but I have several of them, and I don't regret that one bit. I don't personally see much value in one of these types of loaders since I'm not going to dump 50 mags a day at the range, but I love their small AR loader.
I love my maglula hand loaders but these bench loaders over 50$ and 100$ is just a little over priced to me, I dunno wife also says my butt squeaks when I walk also because I'm so tight with money so that may be my problem who knows, the handheld is nice and simple easy to pack and only 25$
I have to admit.. I thought to myself "That isn't going to be that much faster..." then watching you load that mag for an extra 20 seconds I got annoyed on how slow it actually was. Point proven lol.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
GO SOOTCH!!! I've even gotten my old man who's 64 into watching your vids!! On top of awesome vids and gear, you have the commonly overlooked "genuine-factor" that many reviewers either miss or just don't have to start with. The bloopers at the end are funny as hell, and let's us know your human. No matter how much gear, cameras, views, etc. there are attached to a person, at the end of the day, we are all just human. Mannnnn...I know I'm gonna prolly catch hell in the comments for that last sentence being a little too philosophical...😕. I was just trying to say You, Hickok, and Nutn are a lot of our favorites because your not super "try-hards" or inanimate "tacticoooools". You come off as a genuine and pretty cool guy. That being said, there ain't nothing wrong with a genuine dude getting to rip off some rounds with some badass gear! Long live the 2nd-A, the Republic, AND the channel of the Sootch!!! Peace brother.
Thanks Bryan! I appreciate the awesome comment! You're the man!
64 is not old dude! :-)
@@sootch00 will it work with Daniel defense magazine?
Where I see this being a huge benefit is if you're military and loading hundreds of mags on a range day, but I'm lazy and even if I were only loading 2-3 mags, I'd still pick up one of these.
Thank you for reviewing this Sootch! I'm always skeptical when these types of accessories come out if they really work or not - thanks for covering!
I keep the maglula in my range bag- both the pistol loader as well as the AR loader you showed in this video. They are fantastic and a lot less expensive than this full size version. A lot easier to throw in a backpack! I’ll stick with the small one. It’s pretty fast!
As a native South Carolinian, Iraq Veteranx3, and current active duty Soldier/MP I'm extremely proud to see that Team SOOTCH leads the way when it comes to conveying accurate information and professional videos that are entertaining as well. Keep it up SOOTCH!
Thanks for your service to our great nation! I also appreciate the kind words Marshall
Where have I been (The VA, I think?) I have a couple of the Maglula small AR speed loaders but now I must have one of these. Since I reload I can afford to shoot copious amounts of 5.56 ammo. I usually take 10 each 30 round mags out with me so I sure can see the value in this product. Thanks man for the demo video. As always you put out a primo product.
You're one of those guys that can review anything and still have it be interesting. Lucky a fast loader is already cool :) Outtakes are great too.
It's pretty much the best ar15 loader out there. Super quality...pricey but worth it. Got one for $80.
Thanks for speaking about the benefits of using the loader for arthritic persons... God Bless America!
Great for arthritic hands with hand loading at about the 26/27 round they start getting tight. Huge relief from pain
I love watching all your videos even the ones you made prior. I had automatically like this one before I got a chance to watch it fully just because of the music you’re playing at the beginning sounds like a little bit of AC/DC.
Hey Sootch, I enjoy the quotes you started adding at the end.. and yes, Bruce Lee was the man.. Thanks!
Thanks JB!
Skip to 7:00 for timing comparison
7:51 I'm an engineer and it cracks me up you would use anything to right of the digit. yet you timed it to the 100th of a second! I think rounding to the nearest second would make the point... just poking fun at you. I watch your videos all the time and love your presentation, enthusiasm, and knowledge. Keep going!!!!
Hay good evening , nice review !!! use my buddy's a few weeks ago n had to get one wow its fast glad I got one !!! hands down way faster compare to loading by hand, thank you!!! keep the vids coming!!!
Thanks Alfred!
For the 10rd mags, you could stage 30rds on the loader and load 3 mags before refilling the loader.
And for the 40rd round mags you could load 30rds then 10rds.
Hey sootch. awesome video. I made a stir by saying I didn't care for the intros. This was a great intro haha. Keep up the good work!
The 29 rounds mark it's also meant for countries where 30 rounds magazines are illegal but the 29 ones are perfectly fine
It's a faster Than loading them by hand,but still a lot slower than the magpump where you can just stick the magazine into the mag well of the loader,dump the ammo in and go and just start pumping.
I've been seeing those Amend2 mags here and there, but what I haven't seen is a Sootch00 review!
I've used them extensively and they're great. Thanks !
Cool video as always, but why couldn't a 40 rounder be loaded by loading 30 then throwing 10 more in the loader?
@voodoowraith You could do that.
Sootch, I use the Maglula StripLULA AR-15 .223 Rem/5.56mm NATO Loader/Un-loader 10 Rounds loader and it works pretty good
I have a Maglula Striplula and am planning a review coming up. Thanks John!
Very nice demonstration. People complain about the price of the product for $130/- !!! How much does it cost to shoot a box of Ammo?
The price you pay is for the innovation and utility of the product in my humble opinion.
Nice loader. Definitely pricey but I can see the advantages of it.
$133.00 at Midway...Way over priced...
That's insane!
Well if you have relatives fighting overseas, knowing that sending them a dozen of this will make them sustain that firing rate at their enemies, could save their lives you never know, then usd 133 is a steal then imho
Also can't forget that on some AR mags, it's easy to lose count on how many rounds you've just put in your mag. Not all mags have a way for you to tell. With this, you know you have 29.
I will stick with my standard Maglula, it works great. No need for a bench mounted loader, not like I am running training classes.
Excellent review! I know what I’m buying!
Yep. I only do 28-29 rnds too.
What about the podavach? I own one and its awesome, works on 300 blackout, 5.56x45, 5.45x39, and 7.62x39.
That's what I have as well. I prefer it because it works with AK and AR rounds and I like the loading tray for staging.
RockyTop1911 Only thing is, it has a big ass Ukrainian symbol on the pusher.
Impressive video and makes it easier that way about this . looks great '..quick.cool... Awesome job..thank you so much
Thanks Brenda! You're the best!
sootch00 Your welcome..Still great..
Great video! Will this work for the Steyr AUG standard mags (non-NATO)?
Damn it!! I thought I needed the rrs speed loader but this one is more compact..... why did I watch this. 🤯🤯🥴 now I got to chose....
😆HaHa!!! Antonio, I just ordered the RRS with my name on it so it was $50+shipping, haven't received it yet but should have it b4 long. I'm sure I'll be happy with the RRS speedloader but I just love the smaller size of the Maglula. I guess the price tag makes up for the size😂😂👍
Hand loading can be faster if you grab more than one at a time instead of reaching down each time.
Pops quest makes bad ass ones. You should get one!!
cool but i don't shoot enough to justify any of these $120 loaders out there. i'd rather buy 8-10 extra mags to bring out and load with my little $30 lula to save my thumbs, i just load while i'm watching a hockey game or something and take 20 mags in a dry box to wherever i'm shooting
Spot on for those who shoot on their own, no reason at all for something this expensive/nice. I love mine because I teach shooting and it simply speeds up the class by getting them back on the line twice as fast. Makes reloading at the bench a nothing deal.
These were pretty cool until I looked at the cost... Then I got a Podavach U-loader for $40 and I was happier because it takes 3 Calibers and a lot of magazines.
Maglula is known for its quality---Not sure about Padavach but in 2020 they're just about $70 so not that great a savings over the Maglula at this point in time.
Thank you sootch00, its a nice loader, i think i'll get one.
Thanks Alberto!
SOOTCH you have done it again! Great product...too bad... it's on my bucket list tho. Too much $ for me
$133 is what i find them at. It takes a special kinda a person to buy one easy as it is to load an AR mag.
It costs $120 to load just 10 mags which can be hand loaded in 10 minutes. You would have to be pretty well off just to buy the ammo and mags to pretend it was worth buying the Maglula.
Thats my thoughts on it, which are free,,,
This seems fantastic and all but is it really worth $150? That price seems really high but I really don't know.
Well, it's truly expensive, but if you're tired of loading by hand, or just want to make it faster, it's a good investment. These things are also pretty robust, so they last for a good while.
Another great review Sootch00, but I don't shoot that much ammo through my AR-15. Maybe only 250 rounds a month. Also me and my cousin shoot each others rifle too. So I prefer the old way with my hands.
Thanks for watching Jerry! You have to weigh out the benefits. It's not for everyone.
Do they offer a bench loader for the M1A magazines?
Thanks for another informative and interesting video....
Thanks for watching brother!
New sub btw!
I'd like to see how these would work with same size caliber rounds. How many .300blk or .25-45 would be able to fit in the slots
If you accidentally put more rounds in the rail, when you push to load, what will happen? Will it damage the magazine?
It won't allow too many rounds. It won't go in and doesn't damage the mag. Thanks Terry.
Sootch, I like the design of this loader. Less bulky than the board you reviewed way back. Easy to transport and will fit in most range bags. Seems to be very practical. How is it holding up if you don't mind me asking? Maglula, is typically a high quality product but I have to ask. Thanks for the vid as always.
Good way to save those fingers, nice product.
Thanks for watching!
Would be able to use this loader on a ATI 60 rd magazine?
If you have a 3d printer , you can print these out and work great!
oooooh you get a case too. thats worth it
Can you load Ruger mini 14 mags with this? Thx
if you created a gun that you put multiple magazines into would that bypass California's size restrictions?
@Hexaquan No. However, they do make special "star" mags that are California compliant. It's a cluster of five 10rd mags all joined together at the base. They're not cheap, but they definitely do the job.
Which brand of watch do you wear? Thank you!
It's a Hazard4 Heavy Water Dive Watch and it's excellent. Thanks Kevin.
The last mag loader test I saw, you compared the loaders' load times against a standard MagLula, and your times were in the low 30's, as I recall. Yet here you compared against only hand loading a mag.
Was the time for loading with a standard MagLula to close to (or better than?) the MagLula bench loader? (i.e., the bench loader didn't look good at $130 vs. $30 for the little loader?) Seems like too obvious an omission.
You think I'm being deceitful? LoL! I don't get a dime whether you buy it or not. I'm just showing the loader.
Not accusing you of such; I guess the intent/tone doesn't come through in text. It was just such a noticeable omission that I was trying to guess why the comparison wasn't made.
Thanks for the reply and my apologies for the sharp tone. Too many trolls around getting me fired up! lol!
I posted loading a mag with the Lula on FB along with extras footage using the MagPump. I'm planning a video on the AR15 Lula and Striplula coming up.
have you tried any of those 50 round magazines with this loader?
No, I don't have any 50 rd mags.
Where is the daniel defense 32 round mag??? Huh? Looks like the tray could hold 32 rounds? Can you push 32 rounds?
Brother Sootch, what are the name of the sunglasses you're wearing in the "range" portion of this video? Thanks Brother!!!!
Hey Pete, they're no name shades I bought at the beach : ) Thanks !
$5 in materials, sells for $133. Greed strikes again.
Where there is money to be made, greed will ALWAYS exist.
@A E True, it's probably $5 in materials. But how many tens of thousands of dollars did they spend to have the mold made for it? There's more that goes into it than just the material costs. Part of the profit goes toward recuperating the R&D cost, as well as the cost of having the tooling manufactured to produce the item.
Its made in Israel haha
@@crazyfvck Good point. There are also many many other overhead expenses that are taken care of by the $127 profit that A E was claiming, like payroll, insurance, employee benefits, lawyers, accountants, security, and simple utility bills (electricity, water, gas) just to name a few. At the end of the day, I am 110% sure that there is a lot less profit than $127.
@@dizzzave357 Far much more than half of everything we use here in the USA is made outside of our Country (tools, cars, computers, cell phones, household appliances, clothing, AMERICAN FLAGS, etc. etc.). I get the whole "Be American, Buy American" thing, and I do as often as possible, but, how many of the products we use on a daily basis are made in communist countries like China, or even in other countries that absolutely HATE our Country, like Venezuela??? Citgo gasoline stations are owned by the Venezuelan government. Capitalism is not just an American thing, it's a global thing. If you can find a legal way to take someone else's money, why wouldn't you???
Will these affect my magazine spring over timee ?
I have found another tool I need to run out and get ASAP!!
Ever tested with the magpul 6.8 spc mag and ammo?
I am being replaced ... As official mag loader
Lol! No way!
Hahaha, I like to keep the mags at 28 too because of that same reason. But, 28 is for my OCD.
Ahh shooting before 2020!!!
Will it handle 300BLK or 6.8 or 6.5 Grendel?
It definitely works with 300 Blk. Not sure about 6.8 or 6.5 Grendel
Love the pistol version. This looks to be of the same quality.
"Low light situations..." haha. For all the times you load your magazines in the dark for practice.
You might not, but perhap a gun range that earns money by having people shoot does...or a club doing some sort of evening shoot etc.etc. etc. - at least they thought of it. As the old saying goes 'Tis better to have and not to need it, than to need it and not have it' :)
Even if it was faster to load it by hand, even by like twice as fast, i'd still rather use the bench loader when it comes to loading like 20-30 mags.
Thank you for all the information you provide. Love your channel. Do you know of a speed loader for the 60 round Mggpul drum?
Any chance you might review some AK47/74 bench loaders?
podavach.com/
www.magpacker.com/product/magpacker-polymer-ak-47-speed-loader/
At some point. I need to pick up one : ) Thanks
Okay I've watched a couple of the videos. My question is this, that magazine with the lion I think? is that custom? Or is that something that can be bought?
Don't see a price on their website, what is it?
www.midwayusa.com/product/781394/maglula-magazine-loader-benchloader-ar-15-pmag-usgi-hk-416-sa-80-30-round-magazine
Does it work with the sure fire mags though . Since they're thicker
Does it work with 300 Blackout too?
Yes
can you review the single stack .22 maglula speed loader
Excellent Intro!...
Thanks Brother!
Hey Sootch I'm curious why you have not been testing these mag loaders with ETS magazines... 1 of the reasons why I purchased ETS magazine's was because of your review on them... more importantly I'm curious if they will work with ETS mags
Nicely Done!!!
Thanks Brother!
How does It COMPARE to the OLD MAGLULA,OR SPOONS AND PRE-LOADED STRIPPER CLIPS??? One at a time is always slower.I KNOW THIS IS AN OLD VIDEO.
Is this 300 blk compatible???
Try @t made out of High density polyethylene , not PVC or Plastic
I swear, I think I watch your vids for 2 purposes, information and out takes at the end...
like to load my fal mags whit 5 round stripper clips go really fast
Rob at Pops Quest on youtube make loaders for 223, 308 and on. You will find the price not quite so stiff.
Nice.......good review
God Bless
Thanks Lee! God Bless you brother!
does anyone actually have pain in the thumbs from ar mags?
Trevor Spencer Hahaha yeah right! You probably load all five of your mags at your little indoor range and shoot at a paper target. Then go home feeling like you know your rifle and how to fight with it.
Trevor Spencer no, the five that you have at home lock away.
soooth! i was waiting for you to test what is fastet between the orig 1 that goes side to side and this new 1. i feel lime there org 1 is faster because you dont have to line the bullets up u just go right in. if its not faster im guessing its the same
Nice video! I've watched you for years, but I was a little slow on this one. Could your ending catchphrase be partly inspired by Joshua chapter 1 verse 9? Either way I love it!
Thanks Brother. Yes, Joshua 1:9
sootch I bought a striplula by maglula and I highly recommend it. I have yet to see any of the big review guys to do a review. check it out I'm sure you will like it
Just do guns dang it. These videos end up costing me money Sootch!
Lol! Sorry Andy : )
Work for .308 in PMAG's?
Where do you order these? Are they for 556,223 & 7.62x39?
I found one for $119.00 for 55 cents worth of plastic. I'm in the wrong damn business.
You can pretty much compare raw materials cost vs retail to anything in the world and come up with a reason it's a ripoff. You can also wait for China to ignore the patent on a design and pay half as much.... I choose to pay the actual craftsman, but that's up to you.
It's a business the entire point is to make a profit. Materials are just one aspect of it. You forgot about research and development, manufacturing, marketing, sales, distribution, shipping and logistics, warehouse employees property fees for storage.......I own a business and people always want a deal but don't think about your costs.
Nothing is overpriced if people are willing to pay for it. Their mag top loaders are what, 30-40 bucks? Sure, its a few ounces of plastic, but I have several of them, and I don't regret that one bit. I don't personally see much value in one of these types of loaders since I'm not going to dump 50 mags a day at the range, but I love their small AR loader.
all I got out of this thread is Ronald Stonecipher is a crybaby
If pointing out a perspective difference between buyer and seller is crying. Sure I'm a crybaby. Anything else?
I love my maglula hand loaders but these bench loaders over 50$ and 100$ is just a little over priced to me, I dunno wife also says my butt squeaks when I walk also because I'm so tight with money so that may be my problem who knows, the handheld is nice and simple easy to pack and only 25$
Awesome video as always man I watch them all dedicated
Thanks Robert! You have to decide what's best for you. I like the hand loaders as well.
that is so satisfying
I have to admit.. I thought to myself "That isn't going to be that much faster..." then watching you load that mag for an extra 20 seconds I got annoyed on how slow it actually was. Point proven lol.
Superb sir
I love ❤️ this!!!!