I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
To late, I did scratch the hell of it and is very noticeable. Be careful my mistake for rushing and not paying attention to details. Nevertheless, awesome magazine speed loader that makes loading bullets very simple and effortless with no pain involved!
I’ve been using mine for 8 or 10 years, and have literally never done this. And I have no signs of any damage or scratching of my followers. For those who are wondering about this.
100,000 up votes! You explained this in such a way that even I understood! I've searched and watched a number of videos on how to use this speed loader and yours is the only one that showed in detail and the BEST one on the Internet! I can't tell you how frustrated I was trying to figure out how to use this tool. You're the best and I cannot thank you enough! Cheers and stay safe! MAGA
THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
Finally found a review of how the Maglula works!!! All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
Thanks for showing how to use it. Bought my at Academy for $35.00, but let me tell you it makes loading bullets so simple, unbelievably crazy simple. I used it on a Smith & Wesson CSX 9mm magazine because my this handgun purchase did not come with a magazine speed loader, so at first I used my hand to load 12 + 10 bullets into two different magazines. This was crazy hard and painful. When I try to use the UpLula, I was not sure how to use it, so I watched this video and immediately I got the hang of it, so tried and loaded one magazine in less than one minute, unbelievable simple and pain free. Again thanks for this video.
Hello, thank you for the step-by-step instructions. I am very impressed with the little Uplula accessory. I use it for a Para Ordnance P14-45ACP and for the first time I can load 14 bullets without breaking my fingers. 😄👍 Greetings from Germany 🇩🇪
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
Thank you so much. Your video for this UpLULA mag loader is the best. I've just bought it and there is no need to read their instructions on the package. U R right! It's very simple to use because of your video.
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up. And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
Good job- constructive critique you don’t need to mention Glock mag video twice. If they can’t read or understand the first time that is on them. I found myself thinking ok now I am going to see how it is done and boom right into another glock video blurb. Disrupts flow and penalizes those of us who got it and want to see it work. Other than that good job- subscribing and yep that is what the ring is for- lanyard
I purchased a new 9MM Equilizer and they come with the UpLULA speed loader in the box. I couldn't read the instructions, to small, went to their website, the video was TERRIBLE. Went to your site and TADA. Now I am a speed loader. THANK YOU SO MUCH!!! BTW, please extend the recording showing how you can quickly unload the magazine. This is another great simple feature.
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
Appreciate the video cause the directions suck. I’m all about loading ammo myself but these are a must at the range or for people who have arthritic hands. Thanks again!
Hello Is it compatible with the blank bullets from the KIMAR 75 alarm pistol (I can't insert more than 3 or 4 bullets into the magazine because it's so difficult)?
The instructions say to load the first round by hand so you don’t cause wear on the mag follower. Nice video otherwise. Also, if you wear gloves while loading you can keep fingerprints off the bullets! Iykyk !!
Hmmm, With my 30 round mags and my arthritic fingers, i am thinking, next trip to Academy, or online order i am getting one of those.I am in a wild west type state as far as gun laws go.
I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
Thanks for watching!
@@DuncanMeter0:36
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
Hi there, where I can buy this? Thanks and appreciate it 😊
@@vbucaneg Most guns stores carry them. Also, any of the online retailers but Amazon only has the knock-offs.
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
Thanks for watching!
To late, I did scratch the hell of it and is very noticeable. Be careful my mistake for rushing and not paying attention to details. Nevertheless, awesome magazine speed loader that makes loading bullets very simple and effortless with no pain involved!
I’ve been using this for a couple of years and never knew this but it makes a lot of sense. I’ll definitely manually load the first round from now on
I’ve been using mine for 8 or 10 years, and have literally never done this. And I have no signs of any damage or scratching of my followers.
For those who are wondering about this.
There is no doubt that, this the best video for using the Uplula I have ever seen and how to use.
Thanks for watching!
100,000 up votes!
You explained this in such a way that even I understood!
I've searched and watched a number of videos on how to use this speed loader and yours is the only one that showed in detail and the BEST one on the Internet!
I can't tell you how frustrated I was trying to figure out how to use this tool.
You're the best and I cannot thank you enough!
Cheers and stay safe!
MAGA
Thank you! And thanks for watching!! 🇺🇸
THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
Thanks for watching!
I appreciate your video how calmly you explained the process. Now, I will be better at the range. Thank you so much!
Thanks for watching! Check out some of my other videos which you may find helpful.
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
Finally found a review of how the Maglula works!!!
All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
Thanks for watching and thank you very much for the support! Very appreciated!
Thanks for showing how to use it. Bought my at Academy for $35.00, but let me tell you it makes loading bullets so simple, unbelievably crazy simple. I used it on a Smith & Wesson CSX 9mm magazine because my this handgun purchase did not come with a magazine speed loader, so at first I used my hand to load 12 + 10 bullets into two different magazines. This was crazy hard and painful. When I try to use the UpLula, I was not sure how to use it, so I watched this video and immediately I got the hang of it, so tried and loaded one magazine in less than one minute, unbelievable simple and pain free. Again thanks for this video.
Thanks for watching!
Hello, thank you for the step-by-step instructions. I am very impressed with the little Uplula accessory. I use it for a Para Ordnance P14-45ACP and for the first time I can load 14 bullets without breaking my fingers. 😄👍
Greetings from Germany 🇩🇪
Thanks for watching!
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
Thanks for watching!
Thank you so much. Your video for this UpLULA mag loader is the best.
I've just bought it and there is no need to read their instructions on the package.
U R right! It's very simple to use because of your video.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
I'm a newbie and this came with my new Equalizer - love it! Thank you for the video.
Glad it was helpful!
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
Thanks for watching!
I had bought one of these devices a few years ago for my Smith and Wesson M&P 9. Loved it. When i bought my Equalizer, it came with one in the box.
Thanks for watching!
I recently purchased the Equalizer - love this little tool!
You were the best at describing the speed loader. Other channels were awful!
Thanks for watching!
Thanks for this, I have difficulty following written directions and diagrams so your video is perfect for people like me, if there are any.
Thanks for watching!
Butter smooth after you work through the resistance (new magazine). Great job on this tutorial! Thank you.
Thanks for watching!
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
You are very welcome
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
Thank you. I just got one and was confused with the directions but you cleared it all up.
Thanks for watching!
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
You're welcome!
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
Thanks for watching!
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
Thanks for watching!
Helpful for me. Worth what u pay for! Thanks for sharing..
Glad it was helpful!
Great video! Thank you. These little speed loaders are awesome!
Thanks for watching!
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
Thanks for a GREAT explanation/“How to” Video!!
Glad it was helpful!
Great video, works great on 357sig.Their murder on fingers.Great device.😊
Thanks for watching!
Really enjoyed how you explained the Uplulu. Following you now.
Awesome, thank you!
Omg thank you. Your video was straight to the point
Thanks for watching!
just loaded my first 18 round magazine with my new UpLula....No Pain No Strain !!!!
Thanks for watching!
Best loader period!!!!
Thanks for watching !
Just got a sig, 365. The springs are so tight, cut thumb on 4th round. Got this loader 👍👍😂
Brilliant, thumb happy.
Thanks for watching!
Same thing with my 365xl 🤣 just picked this loader up today!
OMG I have got to get this! New owner here and it has been hell trying to load.
Thanks for watching and glad it was helpful! Check out my other videos that may be helpful as well!
excellent video; got it on the first try
Thanks for watching!
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up.
And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
Thanks for watching!
I have it for my 9x19. Wonderful 🤙🤙
Thank you very much, this lil gadget is awesome.
Wow, the UpLula universal speed loader is awesome. It works on Glock 19 9mm and on my Sig Sauer P365-380 .380 magazines !
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
Thanks for watching! Check out my other videos which you might find helpful!
Gm…. Great video,Much faster then a Glock loader….. Appreciate it!
Thanks 👍
Thanks DM. Love Maglula Speedloaders!! 🙂
Works just as well as .380 on my G42.
Thanks for watching!
I love mine, no more having to keep so many different loaders in my bag
Thanks for watching!
Great video thank you
Thanks for watching!
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
Very helpful. Ordered one yesterday.
Glad it helped and thanks for watching! Check out the other videos on my channel that may be helpful to you!
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
Thanks for watching! Check out my other videos which you might find helpful!
Thank you for the demo. Easy to use.
Thanks for watching! Check out some of my other videos which you may find helpful.
@@DuncanMeter will do
Thanks for reminding me how to use this thing.
Thank you for this video
Thanks for watching!
You're supposed to load the first cartridge by hand otherwise you'll mar up your follower.the instructions are right on the manual
There is an unloader on that uplula it is on the side, by the split ring.
Thanks for the vid.
Thanks for watching!
Good demonstration. Thank you
Glad it was helpful!
Got one of these because of a friend’s recommendation and love it. Made in 🇮🇱 💪🏻
Thanks for watching!
Best addition to my new springfield xd
Thanks for watching!
You can also use it to unload the clip as well
Thanks for watching!
There is also a speed unloader on the back of the device, if one chooses not to risk pinching or cutting a thumb!
Thanks for watching! Check out my other videos on the channel that you might find helpful!
@@DuncanMeter😮
@@patrickschulze5130i3
Thanks for the video I just got my first gun and bought this with it and had trouble figuring it out I've gotta use it on my 9 and my dad's 40
Thanks for watching!
The back edge of loader has a way that aids in striping round from a full magazine
Thanks for watching!
Does this also work on a 9mm double stack magazine (GLOCK 17) ??
Yes Bob,
Yes sir!
Finally maybe now I can load My G21sf...😂
Thanks for watching!
It would be nice if you include a link to purchase one. Thanks for the video tho!
Thx for watching
Good job- constructive critique you don’t need to mention Glock mag video twice. If they can’t read or understand the first time that is on them. I found myself thinking ok now I am going to see how it is done and boom right into another glock video blurb. Disrupts flow and penalizes those of us who got it and want to see it work. Other than that good job- subscribing and yep that is what the ring is for- lanyard
Thanks for watching!
Thank you very much this makes sense over the glock ones
Thanks for watching!
Israel makes some great stuff🔥
Thanks for watching!
Thank you, it works great.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
These are excellent.
Thanks for watching!
Works on my carry gun 380 magazine
Thanks for watching!
The little plastic hook protruding from the rear is for unloading magazines, works great also.
Great tip!
Thank you for this video‼️
Thanks for watching! Check out some of my other videos which you may find helpful.
Thanks
I purchased a new 9MM Equilizer and they come with the UpLULA speed loader in the box. I couldn't read the instructions, to small, went to their website, the video was TERRIBLE. Went to your site and TADA. Now I am a speed loader. THANK YOU SO MUCH!!! BTW, please extend the recording showing how you can quickly unload the magazine. This is another great simple feature.
Thank you for the support and for watching!!
Works great love it
Thanks for watching!
T. U. It is easy and a pleasure to use.
Thanks for watching!
Worked up a sweat but 3 clips done
With the help of this video itvwent from up your cula to uplula
Thanks for watching!
Perfect...Thanx friend ..
Thanks for watching! Check out my other videos that you may find helpful.
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
Thanks for watching! Check out my other videos that you may find helpful.
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
Appreciate the video cause the directions suck. I’m all about loading ammo myself but these are a must at the range or for people who have arthritic hands. Thanks again!
Thanks for watching!
Is there a model number with this ?
No serial number that I’m aware of
Love mine!!
Thanks for watching!
Hello
Is it compatible with the blank bullets from the KIMAR 75 alarm pistol (I can't insert more than 3 or 4 bullets into the magazine because it's so difficult)?
Thank you.
You're welcome!
Were can you get one
Thanks for watching! Any local gun store or many online stores. Just google maglula loader
Thanks!
No problem!
You Live in CALIFORNIA! 😂
😭thanks for watching!
Is this made of plastic or steel thnx
Plastic. Thanks for watching!
@@DuncanMeter i bought it thnx
Have you used this with single stack 380?
Thanks for watching! I have not tried
The instructions say to load the first round by hand so you don’t cause wear on the mag follower. Nice video otherwise. Also, if you wear gloves while loading you can keep fingerprints off the bullets! Iykyk !!
Thanks for watching!
Ill stick to my speed loader
Thanks for watching!
Hmmm, With my 30 round mags and my arthritic fingers, i am thinking, next trip to Academy, or online order i am getting one of those.I am in a wild west type state as far as gun laws go.
When you realize we fought the wrong side in the war.
Thanks for watching! Check out some of my other videos which you may find helpful.
Why don't you place the rounds to the right so that you don't have to reach over your left hand?🤦🏻
cool.
Those are a must have
Are these only gor Glock? Asking for an M&P friend. 😊
Thanks for watching! Will work with m&p also
I need 2
Thanks for watching!