The young lady gots some skills ! Might want to source some quarter turn flush mount Dzus fasteners for the front sleeping panels . Cool smartly laid out shop .
Perfect. I like that bottom draw with the lift table. Great little kitchen/ cook station. I’m going to do something similar. Great idea. Thanks for sharing.
I was thinking about building one for my 2020 rav4 hybrid but it would be too heavy and kill my 41MPG. I can just flip the 2nd row seats down and sleep on it.. not flat but works
Sweet! The demo was 👍You should have explained as you were going thru the motions it would have made for a better presentation. Either Way good vid, thx for sharing.
Thank you. Here ya go CUZURLUV 14'' Folding Shelf Brackets Max. Load 440 lb, Heavy Duty Stainless Steel DIY Wall Mounted Shelf Bracket Space Saving for Table Work Bench, Pack of 2 www.amazon.com/dp/B07JK7W4GF/ref=cm_sw_r_cp_api_i_JLgkFbF6KSRQK
Looks nice. But with that many heavy duty sliders and plywood. the weight of the whole system would be more than 200 Kg. lot of weight for the back axel.
Are you kidding me? First, how and where did you get 200Kg? What kind of wood do you use that weights that much?!! Second, a 4runner has at least 1000lb (450kg) load capacity & a towing capacity of 5000 lbs (2267kg). Third, the slides weight 20lbs, 1sheet of 1/2” plywood weight 41lbs, 1 sheet of 3/4” plywood weight 68lbs, and hardwares come in at 5lbs on the extremely high estimate. Even at a high overestimate, the whole thing weights no more than 150lbs (68Kg). An average American adult weights more than the total of all the materials in this build. If you’re concern with having that much weigh in a 4Runner, which is essentially a truck, you shouldn’t own one.
@@SydBuilds I own a LC200 Diesel, which is way better than 4Runner. My car is fully kitted with bull bar, rear bumper, roof rack etc How many slides do you have I saw more than one. In my country 3/4 birch plywood sheet weights 36.5 kg and marine ply weighs 54 kg. That build requires 3 sheets. May be I am wrong and good for you if your total weight is only 68 kg.
Syd, this set up is amazing. You are one smart lady. Thanks for posting this video.
Thank you for the kind words. I'm glad you like it😊
Your skills are astounding . Fit and Finish is excellent. You are truly blessed with this gift.
Best suv camper conversion I’ve seen in a while!! Love the build
Thank you!
@@SydBuilds you’re welcome
The young lady gots some skills ! Might want to source some quarter turn flush mount Dzus fasteners for the front sleeping panels . Cool smartly laid out shop .
Thank you! I’ll consider the dzus next time. Wing nuts and machine screws are a fraction of the cost and more easily available though 😁
I don’t jus like this set up, I’m in love with it! Really super!
I love it! It's like if Dr. Seuss used a straight edge and square :D
😊 Thank you!
Perfect. I like that bottom draw with the lift table. Great little kitchen/ cook station. I’m going to do something similar. Great idea. Thanks for sharing.
I'm glad you find it useful! Good luck it yout build!
This is great...wonder what you do in case you need to get to spare tire.
Beautiful build! Any idea how much the setup weighs?
Very nice job!
Awesome workmanship!! Hope to see more projects to come. Keep it up!
thank you! I do have a ton for projects ready. just need editing and posting. Stay tuned!
Wow wonderful
Very well~this video that I have ever seen(TW/CH/KR/JP/US) is best and very detailed for the camper.
I like it.
thank you!
I was thinking about building one for my 2020 rav4 hybrid but it would be too heavy and kill my 41MPG. I can just flip the 2nd row seats down and sleep on it.. not flat but works
Nice, I need this for my 4Runner.
Agreed, but in my case, I need a 4Runner for an excuse to build this for my 4Runner ...
Haha. Thanks, guys!
Excellent! Great work.
Glad you liked it!
Une Belle réalisation...Explicite.
Merci
Merci beacoup!
Fantastic
a much better version of my pathfinder build haha. just def not enough sitting room!
What an amazing build. What does that thing weigh?
Thank you! it's between 120-140lbs
Kipa ilakes mbak... Sukses terus
It is great and thanks for sharing. I really want to build one for my 5 gen.
You should! It's a fun one!
Very nice....I was thinking of doing that on my Honda Pilot
I'm currently working on an '06 Honda Pilot! Stay tuned!
@@SydBuilds Hello Syd, if you have some spare time for my 2004 pilot for fee?, I am in Fullerton, no tool, no skill
Cool build good job
Great video..how much you think this project will cost $
Sweet! The demo was 👍You should have explained as you were going thru the motions it would have made for a better presentation. Either Way good vid, thx for sharing.
Love this build. Do you have links for the folding L-brackets and the flush-mount handles?
Thank you. Here ya go
CUZURLUV 14'' Folding Shelf Brackets Max. Load 440 lb, Heavy Duty Stainless Steel DIY Wall Mounted Shelf Bracket Space Saving for Table Work Bench, Pack of 2 www.amazon.com/dp/B07JK7W4GF/ref=cm_sw_r_cp_api_i_JLgkFbF6KSRQK
Vakocean 316 Stainless Steel Ring Pull Handle Pack of 2 www.amazon.com/dp/B07HNV7LDV/ref=cm_sw_r_cp_api_i_UMgkFb4S97S94
I can’t remember the exact ones I bought, but they’re all the same
@@SydBuilds thanks so much!
Nice!!!!
Hello. I am one of your subscribers. awesome your videos. do you have a link for the drawer rails ?. thank you
Hi! If you’re talking about the big ones, just search for “heavy duty 36” drawer slides” on Amazon. These ones are rated at 500 lbs.
Incrível, parabéns, muito bom
Great job ,How high is this box?
14”
That's awesome!
Looks nice. But with that many heavy duty sliders and plywood. the weight of the whole system would be more than 200 Kg. lot of weight for the back axel.
Are you kidding me? First, how and where did you get 200Kg? What kind of wood do you use that weights that much?!!
Second, a 4runner has at least 1000lb (450kg) load capacity & a towing capacity of 5000 lbs (2267kg). Third, the slides weight 20lbs, 1sheet of 1/2” plywood weight 41lbs, 1 sheet of 3/4” plywood weight 68lbs, and hardwares come in at 5lbs on the extremely high estimate. Even at a high overestimate, the whole thing weights no more than 150lbs (68Kg). An average American adult weights more than the total of all the materials in this build. If you’re concern with having that much weigh in a 4Runner, which is essentially a truck, you shouldn’t own one.
@@SydBuilds I own a LC200 Diesel, which is way better than 4Runner. My car is fully kitted with bull bar, rear bumper, roof rack etc How many slides do you have I saw more than one. In my country 3/4 birch plywood sheet weights 36.5 kg and marine ply weighs 54 kg. That build requires 3 sheets. May be I am wrong and good for you if your total weight is only 68 kg.
Hello, very very good job !!👍👌💪😉
Merci!
What cool set up!!! You got skills 👍🏼 I would love a set up for my 1st gen tacoma trd. Where are you located?
Thank you! I'm in Huntington Beach, CA
Syd Builds do you have any of these builds on 1st gens?
Do you have a link to the brackets that hold up the sleep platforms extensions?
Just search on Amazon for "collapsible L
brackets". There are many in different weight capacity and lengths. I can't rent which ones I bought.
Genius
Andre Blugh Sr , Thank you 😊
Do you have you blueprints?
nope. All in head.
진짜?
fc thaiLand
Watch on 1.5 speed...get about your day