Check again, you can lock the feet of the cyclone into the CTC midi, like every other T-Loc Systainer.... But you have to align the "backside" first. kinda slide it in
Festool made a cordless vacuum that doesn’t work all that great together with their own festool cyclone A bit strange considering it’s festool and all festool is in design to work flawlessly together and everything being thought out carefully Simple fix if it was me is to just remove the little trap door to the batteries so that you don’t have to undo all the hoses and pull off cyclone every time just to change the batteries
T lock systems all lock on back and front, slide the sustainers onto to clips then lock in. This applies on all sys products, theys nothing that should tip
Check again, you can lock the feet of the cyclone into the CTC midi, like every other T-Loc Systainer.... But you have to align the "backside" first. kinda slide it in
Thanks for the tip I will try it out.
If the cyclone was put on top of the midi the correct way, would the battery operate properly?
Unfortunately, no. You still cannot access the batteries.
Kinda shocked that someone with so many systainers doesn't understand how they connect to each other! 🤪
Prepare to be amazed and shocked by many more things.
Thanks for checking out the video.
Festool made a cordless vacuum that doesn’t work all that great together with their own festool cyclone
A bit strange considering it’s festool and all festool is in design to work flawlessly together and everything being thought out carefully
Simple fix if it was me is to just remove the little trap door to the batteries so that you don’t have to undo all the hoses and pull off cyclone every time just to change the batteries
It is strange. Your solution might work. I would have to check the battery orientation to see if that would work.
T lock systems all lock on back and front, slide the sustainers onto to clips then lock in. This applies on all sys products, theys nothing that should tip
After further investigation I have found what you are talking about. I will release a follow up to clear up what I shared.
Thanks for the information.