How to use a LAMINATOR
HTML-код
- Опубликовано: 29 янв 2020
- This video explains in detail how to use a hot laminator.
First start by turning on the laminating device, so that it can heat up, while we prepare our document and the laminating pouch.
Open up the pouch and insert the document. Then close the pouch and make sure that there are no air bubbles trapped in between the pouch and the document. Otherwise these bubbles will remain in the document later on and it will not look as nice.
As soon as the la minter is fully heated up, we can start laminating.
Insert the document into the machine. Do not use any force or try to pull the document back out. The laminator will pull the document at the correct speed, so we can achieve the perfect result.
When the document comes out of the device at the other end, also do not try to pull it out prematurely.
When the laminating process is complete, we can use scissors or a cutting board to cut the document to size. Make sure to leave a wide enough rim around the document, so that the pouch does not open up again.
You can use a corner cutter, to remove the sharp corners.
Good luck! Хобби
Thanks for speedy and straight to the point video !👍
Thanks very much you have halped someone here
You should feed with the sealed edge of the pouch first, otherwise you risk the pouch wrapping around the rollers. This is a big reason why users of laminators end up with jammed machines.
Very helpful video!👌
Not forget to push the off button after use!
Thank you very helpful !
Glad to hear! Thank you for your feedback 👍
Danke!
How do you clean it
Is that all about laminating
Can you do it with stickers
How much is that laminating machine?
Is it soft plastic when laminated or hard plastic??
It is still flexible after laminating.
Can it laminate 2mm thick material?
if you cut the laminated card in half,will the lamination come off?
Once it's laminated it should stay laminated when you cut it
But if you want little laminated cards but only have a A4 sheet
Cut the cards beforehand you laminate and then after that leaves of ring around the cards witch helps keep the lamination more
Where did you buy the edge cutter?
It came with this laminator.
no way
Hi i am just citing this video and I was wondering when you uploaded it, because for me it only states 4 years ago
Jan 30, 2020. Hit more info in the description for the exact date.
هل يمكنني أن اطبع اوراق ملونة
Yeses
Can i make my own fake ID?
Sure, Better don’t use it though. You might get caught