How to Test a Starter | Starter Test with Battery | How to Test the Starter on a Motorcycle
HTML-код
- Опубликовано: 5 сен 2024
- Learn how to test your starter with a battery in this video from Partzilla.com.
When the starter is removed, you can still test it with a battery to see if it’s working. We’re looking at three different starter designs, and how your testing will vary from one to the other.
Our first design is self contained, with a solenoid and bendix both in the unit. We’re also looking at a unit with a bendix and a separate solenoid. Finally, we’ll test a unit with a separate solenoid, but no bendix.
For some of our testing, we’re using a multimeter. Get one here:
www.partzilla....
Find more electric diagnostic tools here:
www.partzilla....
Read how to do this job step by step: www.partzilla....
These are just the basics, so for specific instructions for your unit, refer to your service manual. For diagrams of the electrical system on your motorcycle, ATV, or UTV, find it at www.partzilla....
RELATED CONTENT:
My ATV Won’t Start!
• Help! My ATV Won’t Sta...
How to Diagnose Starter Problems on a Honda CBR 600:
• How to Diagnose Starte...
Génial merci très utile comme vidéo
Hi, Thanks for your video :) are the all starter motor spinning in the same direction I have triumph tiger 800 and when you look at the spinner it goes clockwise looks like your last starter but yours is spinning opposite way than mine
how about using a scope to look and see if you have a shorted commutator section, i.e, a dead spot, starters more times then not will not exhibit problems until your stranded, testing with a battery only tells you that it turns on, a scope allows you to "look inside" of the starter with out even removing it from the machine.
So i did this for the last example. Its for a motorcycle starter. I just get a spark. Is that a bad armature/commutator?
peak current when motor starting engine
Can I use big bettery as 70-80AH to test?
Hey sir I have a 2001 Honda 400ex I bought new starter last time burnt out now all I get is a click noise
Voltage drop on starter video next?