hi guys back once more was up on there site lot of cool stuff i created a account filled my cart with $265.00 got a cool already installed police mustang body a light kit and a off road light bar set i'am going to like my trick rc thumbs up on this one
Great tutorial. I have everything setup for my SCX10 Wrangler but I don't think the brake lights are working properly. I have the controller set to brake light mode but the brake lights only come on when I reverse. Shouldn't they come on when I let off the accelerator or is this normal function of the brake lights? I have the brake LEDs plugged into the "B" channel.
Needs a 3rd channel input to remotely operate that mode switch for 3ch Surface Radio's. Like the Spectrum DX3E, that 3rd ch. can be operated in 2 Position, 3 position, or Linear.
What company makes that FR-S body? Also, is it possible to have 4 headlights and 2 front turn signals, and 4 tail lights (combo of 2 brake/tail and 2 turn/tail) and 2 reverse lights?
Yes, you can use these on a Nitro vehicle, no problem. You may want to get a slightly larger battery for your receiver since the lights will be powered off that battery. But honestly the lights don't draw that much power. Or you can power the lights off a 9V battery.
can i use these lights for a jada rc car hyper charger car??? here is a link for one... : www.ebay.ca/itm/RADIO-CONTROL-2012-FORD-MUSTNAG-BOSS-302-RED-1-16-JADA-14in-USB-HYPER-CHARGERS-/171544181036?pt=LH_DefaultDomain_0&hash=item27f0d4792c
CrewRiderz you can I have connect two positive wires together and the two negative wires together slice into battery wires positive for positive and negative for negative for jada hyper 2015 Ford mustang Rc and your mustang as well ;=)
I just install an old varad led headlight taillight kit. It has little wire with bar for brake lights to light up when you hit brakes on nitro car, it’s wired. So if I put it on servo how will I take body off. Any experience with these kits?
does this work with the heyokrc light switch as I want to turn on lights remotely from the tx or does it need power all the time because it's hooked to everything? I'm new to rc and just trying to understand before I go buying stuff. Thank you and great video !
I’m having a problem with my controller. My mode 5 has flaring lights. Mode 6 and 7 seem to be the street car mode but the brake lights don’t work when on the brakes or in reverse. They are just on continuously. I have them in B port and I have tried them on mode 6 and 7 (as well as mode 5 per the video. I’m sure I have the UF-7 and not the UF-7C as I have went through every manual and video I can find and still no solution. PLEASE HELP!! Thanks in advance!!
They are 2mm. However, we have scap wires with connectors on them that we can sell you inexpensively. Please contact us through our website and we will get you setup.
Actually, I have a video coming soon that shows how to make light canisters for the tail lights. Also check out Oakman Designs for some ideas on how to install the lights, including headlights.
Hi I have a newer model t maxx 3.3 stock receiver would this particular system work? I would also like to purchase a body with light buckets or one at least with less curves any ideas?
In the video, you described that the 'mode 9' is added to UF-7(turn signal leds have always on). And now I'm looking for controller 'Drift-X'(hazard led is attractive), so the 'Drift-X' had also added with 'mode 9', same one with UF-7??
No Problem. Connections to the receiver is optional, if you want things light brake/tail light function or remote 3rd channel mode control, then you would need to connect the servo cables.
Hi Dedrick, there could be a couple causes. Which LEDs are not bright (headlights, turn signals, or brake lights)? Also, what UF-7 ports are the lights plugged into?
On the UF-7 controller, only mode 1 offers remote ON/OFF control. However, in mode 1 all lights are ON/OFF, so no brake lights or other functions. We are looking into future solutions for this though.
Normally 1/8" for 3mm LEDs, and 1/4" with 5mm LEDs, that's if you are using the included plastic LED mounting clips. Then use Zap Goo or Shoe Goo to reinforce the mounting.
MyTrick RC hi i was wondering if you could do a video for the 1/18th rc cars because i keep seeing 1/10th rc car more than 1/18th rc because I got a latrax teton but they show there work that they did it but not how they did it tho
Hi, The installation on a 1/18th scale should be basically the same. Of course since it's a smaller car there will be more excess wire, but otherwise it's the same. Is that what your asking?
+Frederik Aponno It should work electrically, but the headlights don't look like they would point forward. The body id very contoured were the headlights are. Can you see a way to get them to point forward?
hi guys back once more was up on there site lot of cool stuff i created a account filled my cart with $265.00 got a cool already installed police mustang body a light kit and a off road light bar set i'am going to like my trick rc thumbs up on this one
excellent tutorial. easy to understand.
nice. i just bought this for my RC and then found this video. it helped me a lot. Thanks
Great tutorial. I have everything setup for my SCX10 Wrangler but I don't think the brake lights are working properly. I have the controller set to brake light mode but the brake lights only come on when I reverse. Shouldn't they come on when I let off the accelerator or is this normal function of the brake lights? I have the brake LEDs plugged into the "B" channel.
Needs a 3rd channel input to remotely operate that mode switch for 3ch Surface Radio's. Like the Spectrum DX3E, that 3rd ch. can be operated in 2 Position, 3 position, or Linear.
Wow! Thanks, that really helped me on a problem that I have been stuck on for a while!! :D
Very good tutorial
What company makes that FR-S body? Also, is it possible to have 4 headlights and 2 front turn signals, and 4 tail lights (combo of 2 brake/tail and 2 turn/tail) and 2 reverse lights?
Yes, you can use these on a Nitro vehicle, no problem. You may want to get a slightly larger battery for your receiver since the lights will be powered off that battery. But honestly the lights don't draw that much power. Or you can power the lights off a 9V battery.
can i use these lights for a jada rc car hyper charger car??? here is a link for one... : www.ebay.ca/itm/RADIO-CONTROL-2012-FORD-MUSTNAG-BOSS-302-RED-1-16-JADA-14in-USB-HYPER-CHARGERS-/171544181036?pt=LH_DefaultDomain_0&hash=item27f0d4792c
CrewRiderz you can I have connect two positive wires together and the two negative wires together slice into battery wires positive for positive and negative for negative for jada hyper 2015 Ford mustang Rc and your mustang as well ;=)
I just install an old varad led headlight taillight kit. It has little wire with bar for brake lights to light up when you hit brakes on nitro car, it’s wired. So if I put it on servo how will I take body off. Any experience with these kits?
Taught me to "massage the hole" and "get it from behind"
11/10 install lights on girlfriend
hahahahahahah i caught that too. gotta massage the hole and get it from behind.
+jake taylor Oops, LOL.
does this work with the heyokrc light switch as I want to turn on lights remotely from the tx or does it need power all the time because it's hooked to everything? I'm new to rc and just trying to understand before I go buying stuff. Thank you and great video !
Hi there do u no if u can use lights on a nitro rc 1/10 hpi if u could let me know as I really want them on my car thanks. Great video
Nice Lights
great video pal.
I’m having a problem with my controller. My mode 5 has flaring lights. Mode 6 and 7 seem to be the street car mode but the brake lights don’t work when on the brakes or in reverse. They are just on continuously. I have them in B port and I have tried them on mode 6 and 7 (as well as mode 5 per the video. I’m sure I have the UF-7 and not the UF-7C as I have went through every manual and video I can find and still no solution. PLEASE HELP!! Thanks in advance!!
What size are the 2 pin jst connectors used in yours and every other light kit I have lights with no connectors and I wanna use them in my light kit
They are 2mm. However, we have scap wires with connectors on them that we can sell you inexpensively. Please contact us through our website and we will get you setup.
@@MyTrickRC ok I did contact you guys and you responded back I asked how much for them and you guys haven't gotten back to me as of yet
Can you trim any/all of the wires & resolder since the wires are sooo long?
this is a great video. Will I be able to get Light canisters for a XO1?
Actually, I have a video coming soon that shows how to make light canisters for the tail lights. Also check out Oakman Designs for some ideas on how to install the lights, including headlights.
Hi I have a newer model t maxx 3.3 stock receiver would this particular system work? I would also like to purchase a body with light buckets or one at least with less curves any ideas?
verry helpfull manny kudos
i have light buckets like these and i dont knnow how to fix the led into it because i think i have nothing like that bazzels. where can i get them?
In the video, you described that the 'mode 9' is added to UF-7(turn signal leds have always on). And now I'm looking for controller 'Drift-X'(hazard led is attractive), so the 'Drift-X' had also added with 'mode 9', same one with UF-7??
and now I found that UF-7 has 11 modes. Could you please tell me how do the latest 2 modes work?
Hi, Yes, the Drift-X has the same function on MODE 4
Can I buy just the 9v battery adapter?
Where do you get the l.e.d bezels that snap into the hole made ?
I have a question, can i change the modes using the transmitter?
I have a 1:14 scale car and bought led lights for it but don't know what to hook them up to can you help
Does it matter if you don't connect the esc? I just hooked up the receiver and mine works fine with the mode switch.
No Problem. Connections to the receiver is optional, if you want things light brake/tail light function or remote 3rd channel mode control, then you would need to connect the servo cables.
hi i was wondering if you know what sizes of led light bars fit for the teton
at 21:18 was exactly what i wanted to know lol, because they did not label on my harness i bought the male ends ch1, 2 ect.
iam planning of putting light on diecast car. what will be my power supply?
You can power off 9V battery, a 9V adapter comes included with the UF-7 kits
I installed a kit on my traxxas mustang and when both plugged in one is brighter then the other ? Why does this happen
Hi Dedrick, there could be a couple causes. Which LEDs are not bright (headlights, turn signals, or brake lights)? Also, what UF-7 ports are the lights plugged into?
It'll be nice if you could turn them on nd off from the transmitter
On the UF-7 controller, only mode 1 offers remote ON/OFF control. However, in mode 1 all lights are ON/OFF, so no brake lights or other functions. We are looking into future solutions for this though.
is there a link for this red body
What is the exact name of the lighting system
Where can i buy that set of lights?
Does this work on the Hpi e10?
Can I we do distribution of your product in Panama, Panama?
you missed the Fog Lights on the camaro
Wo bekommt man die Steuerung?
me gusta mucho el vídeo
Sure, you can find them here: www.mytrickrc.com/car-products/
do you know how to install them to a lamborghini murcielago police car?
Possibly, what brand of body is it? Does it have light buckets for the headlights?
Does anyone know if this will work on a 2 channel receiver like the tower 224 system
This should work on a 2 channel receiver. Motor and Steering is all you need.
MyTrick RC thanks
where to buy light kit?
do a video with all modes
Can't hook up my lights came with one power cable not 2
Please send us an email at Info@mytrickrc.com We will get you sorted straight away.
the motor control on the receiver is the throttle slot?
+Jay c. Correct
Hi Jay, not sure I get you reaning, can you explain it more?
Can u send me an link where to buy the led set please?
www.mytrickrc.com/
www.mytrickrc.com/car-products/
Will this work on a Walmart RC car ?
Yes, if you power off a 9V battery. That means no functioning brake lights, turn signals, etc.
@@MyTrickRC because I have the Hans Rx7 from Walmart and I wanna be able to add headlights and the backfire exhaust but not quite sure how to do it .
Anybody from 2021?
should you buy amber lights or orange lights for turn signals?
Depends on your preference. We can build with yellow if you email us when you place your order: info@mytrickrc.com
WE normally sell orange, but we do also sell amber. It was a debate her for a while, now we lean towards amber
What size drill bit?
Normally 1/8" for 3mm LEDs, and 1/4" with 5mm LEDs, that's if you are using the included plastic LED mounting clips. Then use Zap Goo or Shoe Goo to reinforce the mounting.
how much
We have the same light kit dose it work with a rc truck can you help us
+Robert Lumia Yes, it's universal and will work with your truck also.
+Robert Lumia Hi Robert,
Yes, it works exactly the same way on your truck. What kind of truck do you have?
Hi where do you get the light kits?
You can get it on our website: MyTrickRC.com
Where do you get the hand drill?
We sell it on our site.
What set is this?
That't our Standard Car Kit SKU= MYK-CR1
are they waterproof?
no
were can we get this?
+xxmyspac You can get this lighti package at: mytrickrc.com
I didn't get the chip on my order??? Bought LEDs but didn't get the uf7
+Jack Meadow
Hi Jack, I don't see your order, can you confirm the name you ordered under?
Regards,
Dan
D+
고도리 브러시리스인가?
Can you send me one
Its an HPI Toyota FSR Body: www.hpiracing.com/en/part/108064
MyTrick RC hi i was wondering if you could do a video for the 1/18th rc cars because i keep seeing 1/10th rc car more than 1/18th rc because I got a latrax teton but they show there work that they did it but not how they did it tho
Hi, The installation on a 1/18th scale should be basically the same. Of course since it's a smaller car there will be more excess wire, but otherwise it's the same. Is that what your asking?
Yea because ive been having problems with it
Can you send a pic
do you get the y sllitters with the set?
Yes this package includes the Y splitters.
wich light set is this can someone send a link please
Hi Try this: www.mytrickrc.com/shop/car-basic-light-package/
если бы это сделал ребенок то хорошо , а так смотрится не красиво , особенно задние фонари поверх родных фар круглые светодиоды )
Would it be possible to install these on this toy-grade Murceilago?
www.amazon.com/Remote-Control-Lamborghini-Murcielago-LP670-4/dp/B0045M2OBC
Nope because you cant take the body off
the system can power off a 9V battery, but I have no idea regarding LEDs installation
Does this kit work for this car? www.nitrorcx.com/03c806-madspeed-350orange-24g.html
+Frederik Aponno It should work electrically, but the headlights don't look like they would point forward. The body id very contoured were the headlights are. Can you see a way to get them to point forward?
Can the brake light function be programmed to stay on while the throttle is in neutral for aplication into a crawler with a drag brake?
I use a BEC so would I take the power off that as I've disconnected the power from my ESC?
hey where can i get these led kit?
Please check out MyTrickRC.com
please check out out website: mytrickrc.com
Where can i get this led kit ?
you can get it on our site: www.mytrickrc.com/shop/car-basic-light-package/