Install LED Lights On Your RC Vehicle - How-To

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024

Комментарии • 159

  • @bitcoinfox376
    @bitcoinfox376 2 года назад +2

    Just added some 6 LED lights to my HOSIM 9125 and took it out for a night drive. Look and work fantastic. Being able to know which way the RC is facing with the lights is fantastic!

  • @jesseervin
    @jesseervin 7 лет назад +2

    These videos are very well done. I don't know what gear your using but the production value is on point! You two are great personalities for this. I'm so happy to see a hobby shop using RUclips in this way. Such a smart marketing decision.

  • @areyousureyouenteredyourna85
    @areyousureyouenteredyourna85 4 года назад +3

    Thanks, man! I'm thinking of putting lights on my customized BIGFOOT 1. This video is probably going to come in handy.

  • @IgotHeliFever
    @IgotHeliFever 7 лет назад +2

    Thanks Roger & Adam Great Tips on LED's

  • @pyrace
    @pyrace Год назад

    Top Stuff, this was the first Video I clicked on and its the only one i need 😁
    Great Job and Thanks.

  • @band1986
    @band1986 8 лет назад +1

    I just got done bashing in the backyard with my kids and my slash is covered in dust and supremely happy.

  • @tracymcknight8978
    @tracymcknight8978 10 месяцев назад

    Loved your video. So I have a tamiya 1/10 CR01 UNIMOG. I want to add 6 lights to it as the instruction manual says. It only shows where the LED'S are installed. What do I need to plug the 6 lights into? And do I need a switch in order to shut the lights on and off from my transmitter? Thanks

  • @band1986
    @band1986 8 лет назад +3

    I'm getting my 2 wheel drive slash ready for Race season coming up here in Tempe in November. I'm totally going to rock your decals.

    • @averagejoenitro2730
      @averagejoenitro2730 8 лет назад

      I just bought a used 2wd slash also. It has the brushless velineon system on it. I love it! Got a great deal on it and would love to do some off road racing with it at my local track! What type of racing are you doing with your slash?

    • @band1986
      @band1986 8 лет назад

      I love my slash and I've also upgraded to a 2s LiPo which is a 7.4 volt 35c which is the lowest recommendation as far as I found.

    • @averagejoenitro2730
      @averagejoenitro2730 8 лет назад

      Yeah I have a 2s 25c and a 3s 25c or 30c I can't remember off hand. The 3s is crazy! It's honestly almost too much for a truck as light as the Slash is lol!

  • @Smait706
    @Smait706 7 лет назад +2

    I got the keliwow fighter 1 & got lights for it plugged it into the 3rd channel but there is no 3rd channel switch on the transmitter & also do I have to get a bigger battery to handle it came with a1500mah? thanks

  • @justiceonly9105
    @justiceonly9105 4 года назад

    Hi,
    Very grateful to both of you. I benefited alot from you.
    Have a great day

  • @aviano72
    @aviano72 6 лет назад +3

    Great video on How To..... I have some LED lights and it come with a JST connector which confuses me. I've seen this JST on other things like a fan. But my question is where do i connect that JST plug ?

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +2

      JST may be connected to any power source with 4.8-6V and you may plug it in any empty receiver cannel. Receiver plugs are different, as they have three connectors (negative, positive, signal), but you may still plug something else in there. So you want to plug JST into just two (negative and positive) connectors in the slot.

  • @band1986
    @band1986 8 лет назад +3

    These guys are super cool. I've talked to them on the phone and they are no different than they seem on RUclips. My truck is way better for having talked to them. thank you for your vid

  • @timvanasen6711
    @timvanasen6711 4 года назад +1

    I'm 3 years late butt turn signals for crawling are very annoying I might put them on my Kyosho 70' SS Chevelle and those type road cars for scale effect, thank's for sharing the tutorial 😎👍

  • @boltthr0w3r29
    @boltthr0w3r29 6 лет назад +9

    I always liked y’all! Ever think about doing talk show radio?👍🏼

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +2

      Thank you for your comment...we'll pass info to the owner!😎 its cool to know that you guys like us that much :)

  • @averagejoenitro2730
    @averagejoenitro2730 8 лет назад +1

    Yes, very much so enjoy your videos! Very educational!

  • @wickedstang2003
    @wickedstang2003 2 года назад

    So im new to rc and just bought a CEN F450 and adding after market front and rear bumpers that have led lights in them as well as a light bar on the roof... so 3 things with lights.. what light controller would I need to make them work?

  • @mayzo7439
    @mayzo7439 7 лет назад +2

    Thanks for the led hook up show 👍👍

  • @peterhino6433
    @peterhino6433 3 года назад

    Two thumbs up learned a lot with your videos

  • @Alkaline7.62
    @Alkaline7.62 5 лет назад +1

    I have a clone of an HPI Baja it only has a three channel receiver which all three are dedicated since I will be adding a kill switch to the third channel how would I install my LEDs and power them I have not been into the battery box yet so I’m not sure if these top trucks are like nitros and have a battery plug any help would be greatly appreciated I am new to all this and I’m feeling very lost

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      You need just to power them, use Y-cable and plug LEDs in any channel.

  • @carloscer
    @carloscer 3 года назад

    Hello RC Streeet Shop, My name is Carlos Rojas. I tell you that I have an RC traxxas Ford Raptor 1/10 scale 2wd slash, and I want to install that led light bar from the Pro Line brand, in addition to installing the front and rear lights to my truck. Which ones can you recommend?, My RC truck has only 3Ch model 6519 KA1867-R01 receiver. Ch1 Ch1 Ch3 Ch3. If I buy the led bar and the front and rear lights through amazon, can I connect them to my receiver? , Or should I change my receiver and change the remote control.? Excelent Video.

  • @luismurillopadilla9868
    @luismurillopadilla9868 Год назад

    I have a axial can am rc and I know we’re my reciver is but I wonder we’re if I need to unbox the reciever or just plug it???

  • @zdattonejones6709
    @zdattonejones6709 3 года назад +1

    Where are you guys?
    I enjoy your information

  • @sufyaankhan232
    @sufyaankhan232 3 месяца назад

    Hi what module can I use on a 9 inch light bar for a Lois five t?

  • @nickrich710
    @nickrich710 Год назад

    Do you have any videos with LED lights on the gift RC synalog 25

  • @silentstormstudios
    @silentstormstudios 7 лет назад

    Does using the Axial high output LED controller preclude the need for me to use a BEC? I'm planning on installing an eight LED lightbar plus four tail light LEDs on my Axial Yeti kit that I'm building.

  • @ddynoah9208
    @ddynoah9208 3 года назад

    Will the Axial AX31152 fit older Traxxas Stampede

  • @band1986
    @band1986 8 лет назад +1

    I'm super interested in the short track racing near my house. I'm running a castle 3 4 pole brushless motor with a castle ESC upgrade and fan. But I am running the stock rear end gearing and shocks.

  • @hijgame1378
    @hijgame1378 5 лет назад +1

    hello sir
    i and my team are in a compitision 4x4 land rover
    and we want to put some Lighting sengor that open when the britnes drop at 25 lux can u help as out what sensore or 'kit' we shod buy
    thanx

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      Try some robotics stores selling DIY stuff (RC stores normally do not carry these)

  • @znovosad555
    @znovosad555 7 лет назад +3

    Don't forget about other aftermarket option light bars and light buckets. Onetoomanyrcs has some great light bars and RC4WD has some great options as well. Some people like me don't like running off the receiver and chose to hook them up to a 9 volt. I've done the receiver before and it gets annoying when you have roof lights. Having to unplug them and wires dangling. Many light options out there.

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +1

      Great info! Thanks!

    • @Foxhound21048
      @Foxhound21048 6 лет назад

      Zach Novosad hey, how long did your 9v light mod stay lit on a single 9v?

  • @FranciscoSanchez-mp5tz
    @FranciscoSanchez-mp5tz 7 лет назад +1

    your website is down...I'm trying to get a lightning kit for my cr jeep.

  • @fernandocabral6193
    @fernandocabral6193 4 года назад +1

    Hi guys what's the size of the jst connector on the end of the light strands 1.25mm 1.50mm 2.0mm

  • @LeftenantMalachi
    @LeftenantMalachi 5 лет назад +1

    I have the MYTRICK rc light kit on my Gen 8 Scout. It seems to turn the whole truck off if I am going through deep water. I tried putting conforming coating, and it does the same thing. Do I need to ditch the light kit?

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      You are shortening it somewhere while going through the watter

    • @LeftenantMalachi
      @LeftenantMalachi 5 лет назад

      @@Rcstreetshop I ripped out the old light kit for my Scout. I need one that is waterproof. Any impressions on this one? club5racing.com/ezon-led-lighting-series-for-redcat-gen8-body-waterproof/

  • @Ittybittythetwofacedkitty
    @Ittybittythetwofacedkitty 2 года назад

    How many milliamperes can the receiver supply to the lights. I would think their is a limit on the number or size of leds’ you can install as far as power demand. I guess you could install a mini relay to power the lights if the power demand gets too high

  • @rayatlast
    @rayatlast 4 года назад +3

    Nice video, I have a question can this led kit work directly from a battery source or those requires a receiver? Thanks

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +1

      It is actually better to power it off of a separate battery.

  • @fatboyshadetree5139
    @fatboyshadetree5139 7 лет назад +1

    Im getting into rc trucks and a fan of rock crawlers. I am looking to get the scx10 as it has what i am looking for. Also going to get a venom 20c 2s lipo i think its 4000mah. Someone said they get about 1-2 hours of run time.But i wanted to know how much the lights drained off your run time.

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +2

      Not really a lot, actually so small that it shouldn't be even taken into the consideration.

    • @fatboyshadetree5139
      @fatboyshadetree5139 7 лет назад +1

      RC Street Shop k thanks so much.

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад

      Anytime!

  • @davidmp4113
    @davidmp4113 4 года назад +2

    How can i add lights to my RC Drift car with only 2 channel receiver?

  • @wastedwagesmercuryman6018
    @wastedwagesmercuryman6018 5 лет назад +25

    Man he sounds like Seth Rogen

    • @Foxbodyguy91
      @Foxbodyguy91 5 лет назад +1

      Was that a fart?...... I can taste it.....on my tongue..... is that onion and ketchup?.......... now that I think about it, those tuxedos are fucked up.

    • @danielantunes1035
      @danielantunes1035 4 года назад +1

      Seth Roger

    • @RecklessGenesis
      @RecklessGenesis Год назад

      He doesnt , rapist

  • @JOSERIZALADVENTURES
    @JOSERIZALADVENTURES Год назад

    there's no slot in the controller for my remo hobby truck

  • @burn1gotbeats
    @burn1gotbeats 4 года назад

    Is okay to run lights through the bind or VCC port on receivers?

  • @freshej6
    @freshej6 3 года назад

    Hey guys Where do I get the Piaa fog lights

  • @alvaroferreyros8711
    @alvaroferreyros8711 4 года назад +1

    The light bar into the servo kinna makes it hard to open and close body without tugging the line. What should i do?

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +1

      Use standard servo connector in the middle

    • @alvaroferreyros8711
      @alvaroferreyros8711 4 года назад +1

      @@Rcstreetshop I should run a 2nd servo?

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +2

      No add a basic servo extension and every time you need to take it apart just unplug the cable.

    • @alvaroferreyros8711
      @alvaroferreyros8711 4 года назад

      @@Rcstreetshop good to know. Thanks for the tip, I found a 2 way so I can also add a set of LEDs for headlights and taillights.

  • @mariowong2091
    @mariowong2091 2 года назад

    Can you install led lights on an ECX Circuit truck?

  • @christammy986
    @christammy986 5 лет назад +3

    I'm looking into getting led lights for my arrma granite 4x4 blx, any ideas?

  • @davidashworth1571
    @davidashworth1571 2 года назад

    I need to know which cable to disconnect the lights

  • @tylerbowers6378
    @tylerbowers6378 8 лет назад

    These guys are awesome

    • @Rcstreetshop
      @Rcstreetshop  8 лет назад +1

      Thanks everyone for the kind words!

    • @oceanrichardson4674
      @oceanrichardson4674 8 лет назад

      RC Street Shop hi i have a latrax teton but i got a G.N.H led light system for my teton and i was wondering what do i need to do because i get lights on but no power an steering...

  • @omarmorales3272
    @omarmorales3272 4 года назад +1

    I see all those parts on the wall and I have a nitro rustler 1/10 I need parts were do I order

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +1

      Give us a call 562-426-9000 we're in California

  • @usermalibu
    @usermalibu 7 лет назад +1

    Can I add this to Jeep bodyshell for the nitro rcx gas powered the guy said I could as long as it’s 1/10 shell the product I’m changing shell is Monster Truck Radio 1/10 2.4Ghz from nitro rcx

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +1

      With aftermarket stuff you really want to double-check. Everything is doable in RC world, but there are no guarantee that mounting holes, would perfectly match etc and you would need to make custom bracket etc. So I recommend to check in-store with sales or tech, to make sure that everything is perfect.

  • @abhijith7558
    @abhijith7558 5 лет назад +2

    How to fit lights in my 2855 rc jeep

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      It is hard or even impossible to explain in the comment section how to do something like this. Stop by the shop and we will be happy to help.

  • @kinglow4544
    @kinglow4544 5 лет назад +2

    That's cool

  • @vtec8641
    @vtec8641 5 лет назад +1

    Mine broke need a video how to fix it the wires ripped apart

  • @logankonarzewski4740
    @logankonarzewski4740 6 лет назад +1

    Do you guys sell the velineon upgrade kit and lipo batteries?

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      Sure we do, give us a call 562-425-9000 or visit www.rcstreetshop.com

    • @logankonarzewski4740
      @logankonarzewski4740 6 лет назад +1

      Well I’m looking to make my traxxas stampede faster but the velineon kit is very expensive

    • @logankonarzewski4740
      @logankonarzewski4740 6 лет назад +1

      Any suggestions

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      The least expensive upgrade is - gearing. Try changing gears first.
      and you still be able to run Lipo batteries with your stock Motor/Esc (which is faster), just don't forget to switch mode.

  • @airellhafidz3266
    @airellhafidz3266 4 года назад +1

    How to put ped lights on my wltoys a959b?

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +1

      I'm sorry we're not familiar with this one

  • @andrewplayfair3075
    @andrewplayfair3075 5 лет назад +1

    Do these need to be run off a lipo?

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      Battery type doesn't matter, Lipo is just a power source.

  • @aaronmckinley8579
    @aaronmckinley8579 6 лет назад +1

    Will that front bumper fit the yeti score TT?

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      Its for SCX10 so it won't.... unless you're willing to make some custom mountings

    • @aaronmckinley8579
      @aaronmckinley8579 6 лет назад +1

      RC Street Shop ah okay. Is there any bumper that's along that style that would fit? Thank you, love your guys' videos.

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      Give us a call and talk to Roger...he is the only right person to ask and he is off today (unfortunately I'm in 1/8 buggy). We have a lot of stuff which sometimes only he know we have. Our phone number is 562-425-9000 10am-7pm PST

  • @usermalibu
    @usermalibu 7 лет назад +1

    Can I add a bodyshell Jeep on a nitro powered car with these lights?

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +1

      Sure you can, you just want to double-check scale and make sure that you have a spare channel on your receiver or get a Y-cable.

    • @usermalibu
      @usermalibu 7 лет назад +1

      RC Street Shop ok what’s a Y cable

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +1

      it is a splitter for receiver, in case you have 2 channels only and you need to plug additional stuff in it.

  • @jessefreeman5726
    @jessefreeman5726 Год назад

    Very good information and instruction; I just have to say I was a bit disappointed after all that work installing that bumper; we didn’t get to see the final product on display!!! 😢

  • @SY-ng7sd
    @SY-ng7sd 6 лет назад +1

    Where did you buy that light?

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      RC Street Shop of course 😎👍

  • @grassyplays6601
    @grassyplays6601 6 лет назад +1

    what brand is that truck

  • @srgt-squeaky9186
    @srgt-squeaky9186 8 лет назад

    Can u do this to a tank?

  • @joehah3858
    @joehah3858 5 лет назад +1

    The best rc truck, car, boat, and helicopter is hpi racing they put real mini engines that run on nitro fuel and the parts are so realistic.

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      It looks like your'e die hard HPI fan :)

    • @joehah3858
      @joehah3858 5 лет назад

      RC Street Shop your right

  • @droneandroam
    @droneandroam 3 года назад

    Big guy sounds like John C Rielly lol

  • @Godgoodtheknight
    @Godgoodtheknight 11 месяцев назад

    they had dirty shirts on 7 years ago i hope they cleaned up some if they are still around.

  • @Mike-oo1fs
    @Mike-oo1fs 7 лет назад

    U guys should go to rc street shop I went there and they had really good deals for cars

  • @brianclark8354
    @brianclark8354 7 лет назад +1

    What front bumper was that

  • @MW-C-Music-Copyright-Free
    @MW-C-Music-Copyright-Free 7 лет назад +1

    Que Pasada , Muy Bueno !! ;)

  • @abhijith7558
    @abhijith7558 5 лет назад +1

    How to add please tell me

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      It is hard or even impossible to explain in the comment section how to do something like this due to a lot of variables. Stop by the shop and we will be happy to help.

  • @jameskennyii9388
    @jameskennyii9388 4 года назад +1

    why do my lights strobe when I turn the power on?

    • @Rcstreetshop
      @Rcstreetshop  4 года назад +1

      LEDs need a special setup, if you power them off of the battery they will strobe.

  • @CarlosCruz-mt9go
    @CarlosCruz-mt9go 4 года назад

    Rc street shop home much for you to take a look at my rc car that isn’t responding with remote ❓

  • @mrbigjem87
    @mrbigjem87 7 лет назад

    What can I do if the wire does not reach the receiver?

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад

      Servo wire extensions should do the trick. They come all sorts of different lengths.

  • @miguel360kmc
    @miguel360kmc Год назад

    What about nitro trucks

  • @tomiaslongstone9443
    @tomiaslongstone9443 6 лет назад +1

    Hi I can not find a receiver box on my rc car

  • @heathwebb1749
    @heathwebb1749 7 лет назад

    what is the name of your battery? please report back to me. Thanks For Make This video

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад

      That is a Venom Lipo battery Roger is using.

  • @kevinisaguirre9952
    @kevinisaguirre9952 3 года назад

    What if it turns on and then just turns off

  • @arcticninja8865
    @arcticninja8865 5 лет назад +1

    I didnt know Seth Rogan was a hobbiest!

  • @dilshanperera01
    @dilshanperera01 5 лет назад +2

    Mine dimming when reversing car

    • @Rcstreetshop
      @Rcstreetshop  5 лет назад +1

      It may, but only if the voltage drops due to some kind of load (wheels got stuck, acceleration, etc).

  • @nathancunningham8717
    @nathancunningham8717 Год назад

    Good video but I would've just cut a few inches off those wires and you'd have alot more room.

  • @mulder2400
    @mulder2400 Год назад +1

    Can you get bigger overstuffed fingers to do that ? lol ...

  • @SHIZZOTHEPRO
    @SHIZZOTHEPRO 7 лет назад +1

    nice! check out my Xmaxx

  • @Mike-oo1fs
    @Mike-oo1fs 7 лет назад +1

    And if u are a beginner u should go tgere

  • @Mike-oo1fs
    @Mike-oo1fs 7 лет назад +1

    There

  • @RccarsUK
    @RccarsUK 6 лет назад

    Seth rogen? 🤔

  • @flintsmiley9595
    @flintsmiley9595 5 лет назад +1

    To much talking cant listen anymore 2mins to much

  • @Daddy_and_Bo
    @Daddy_and_Bo 6 лет назад +2

    how do you connect 4 separate led lights 4 separate plugs to a 3 channel receiver?

    • @Rcstreetshop
      @Rcstreetshop  6 лет назад +1

      Either by multiple Y-cables or by soldering into one plug

  • @m.g.v.
    @m.g.v. 7 лет назад +1

    So, on my receiver I have 2 ports open ; AUX and BIND. In what port do I plug it in ?

    • @Rcstreetshop
      @Rcstreetshop  7 лет назад +1

      AUX port would do it.

    • @m.g.v.
      @m.g.v. 7 лет назад +1

      Thanks

    • @dustinshort6207
      @dustinshort6207 7 лет назад

      maarten govaert plug it into the bind port, turn on your tv, then turn on the rc car, then, you will summon the ultimate hidden government free energy device to communicate to the aliens. DO NOT TELL THEM THE KRABBY PATTIE SECRET FORMULA!!! Or else Obama will rig the election of 2021 in Bush's favor. Then 11/9 will happen and all the Mexicans will die.

    • @trentmyers5930
      @trentmyers5930 6 лет назад

      Dustin Short I did that device is dope