I did a Rust-Oleum paint job on my XJ Cherokee. Two tone kona brown and white. But i sanded it down to bare metal/factory primer. 320 grit. Primer, 2-3 coats. Sand to 400 grit. 3-4 coats paint. I used the Rust-Oleum ultimate clear coat which is UV resistant. Another 3 coats. Wet sand to 2000 and polish and wax. Its very important to do this in the shade. I did this over 2 years ago and still looks great today.
Did you degrease the surface at all? With alcohol or anything? Just curious. When you said you started to apply clearcoat that it statted "orange peeling" i assume it was actually lifting, which means either the clear coat wasnt compatible or there was wax or grease left behind.
I was gonna use rubbing alcohol to do that but I didn't need to after sanding the whole surface and then washing it with dawn soap which degreases. I had no problems with the paint bonding
@HanzelFonferek I was just curious is all. In my experience, sanding and washing with dawn, which I also use wasn't enough. Car wax gets deep into the and even more so with sanding. I personally don't see any need to add clearcoat to the paint you used bc its already gloss and you did a good job of putting it down. Sanding and buffing it will make it look like clearcoat or close to it. But something was causing a reaction when you did the roof with clearcoat, either paint type or contamination.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Pretty decent job you masked the car, off sanded primed. Nicely done. 👍
Thanks man
I did a Rust-Oleum paint job on my XJ Cherokee. Two tone kona brown and white. But i sanded it down to bare metal/factory primer. 320 grit. Primer, 2-3 coats. Sand to 400 grit. 3-4 coats paint. I used the Rust-Oleum ultimate clear coat which is UV resistant. Another 3 coats. Wet sand to 2000 and polish and wax. Its very important to do this in the shade. I did this over 2 years ago and still looks great today.
That's great to hear man
Some of the best kinds of RUclips videos right here....and cat videos.
Thanks much appreciated
Gonna do this to my 99 civic. Thanks your video helped my questions! 👍🏻
Sweet bro! Good luck to ya! No problem glad I could help!
Nice bud. Looks a ton better.
Thanks man I appreciate it!
Pretty color
It is
Absolutely bluetiful🎉
Yep
Thanks
Nice color.
Thanks man! Same color as our dump trucks
good job - love those saturn
Thank you! Appreciate it
ThatDudeInBlueSaturn! Hahaha! And it looks good too!
Hahaha 😂 right! Thanks appreciate it!
I have a 99 i want to paint. It looks just like your car before. Nicely done. How long did it take?
About 3 days. One day to prep, one day to prime and one day to paint
Super nice
Appreciate it
Did you degrease the surface at all? With alcohol or anything? Just curious. When you said you started to apply clearcoat that it statted "orange peeling" i assume it was actually lifting, which means either the clear coat wasnt compatible or there was wax or grease left behind.
I was gonna use rubbing alcohol to do that but I didn't need to after sanding the whole surface and then washing it with dawn soap which degreases. I had no problems with the paint bonding
@HanzelFonferek I was just curious is all. In my experience, sanding and washing with dawn, which I also use wasn't enough. Car wax gets deep into the and even more so with sanding. I personally don't see any need to add clearcoat to the paint you used bc its already gloss and you did a good job of putting it down. Sanding and buffing it will make it look like clearcoat or close to it. But something was causing a reaction when you did the roof with clearcoat, either paint type or contamination.
@timsolomon8352 yeah the paint most likely wasn't cured enough is all
Quick question? 10 or 2 cans of the 5 in one? Cause I know you said 10 but with it being 5 in one I wasn’t sure.
10
If you did decide to clear coat it, what type of paint would be compatible with Rustoleum?
Rust-Oleum clear would probably work
Rust-Oleum 302110. It's UV resistant.
Nice job man, doing my car the same color, how long it take you for sanding and all?
Thanks man. 3 days total to do everything. 1st day sand and prep, 2nd Day prime, 3rd day paint
@HanzelFonferek thanks man once again, also have subbed..
@@Stormmaniac No problem. Appreciate it bro
@@Stormmaniac Best of luck to ya!
I forgot to ask what grit sandpaper did you use when sanding over the primer?
Wisconsin plates?
Yep
Yeah, I looked back through your videos after watching this one and see you're up here at least some of the year. Nice job on the paint.
@n84434 Yes sir. Thank ya!
Bumper?
What spoiler is that ?
www.carid.com/t5i/2005-scion-tc-spoiler/t5i-rear-spoiler-25998743.html?relationshipId=6007017578&childId=5486484475&offermpnid=4990420853&view=779702&gad_source=1&gclid=CjwKCAjwte-vBhBFEiwAQSv_xVMJuxGyqg3vNHjBW5ROJV1Sng4CLMcwXOGJp25mZHyCBabLdMtwFRoCc5MQAvD_BwE&gclsrc=aw.ds
Not a bad deal. I thought of doing one of my vehicles but mine is a little bigger job.
Yep
Well done 🚲💨💨💨💨💯🏁
Thanks bro!
Thanks, I mean it's exact.. white hood and everything 😂
Yeah no problem lol
Color looks awesome, just there isn’t enough color difference to make it look normal.
@@MattyH64 Thanks. Normals boring
Speaking of dump trucks.
Should have wet sanded the primer.
Yeah I could have it turned out pretty good tho
@@HanzelFonferek yeah when ya primer it wet sand cuts down all the bumps.
until that one mf starts mowing next to you 😵
You only needed to prime plastic and bare metal lol.
The primer fills in any imperfections as well as making the paint adhere better
I'm not gonna sub unless you wet sand and polish that B dude and that exhaust ruins everything make that look legit man sheesh
IT DID NOT TURN OUT GOOD. IT TURNED OUT LIKE A DUDE PAINTED IT OUTSIDE WITH RATTLE CANS.