Fitting new Kenwood Double DIN HU - 2005 Volvo V70R
HTML-код
- Опубликовано: 10 май 2022
- Fitting a new Double DIN Kenwood HU in my 2005 Volvo V70R (Facelift)
Fascia and wiring kit:
incartec.co.uk/product/Volvo-...
Stereo:
www.ebay.co.uk/itm/255489143084
Useful fitting guide video that I followed
• Volvo S60 XC70 Radio r...
Social Media:
/ homemechanicuk
/ homemechanicuk
Thanks for watching :) Авто/Мото
Sorry, the links for Incartec no longer work, search their site.
props for a great black sabbath ballad taste!!😄
I like that kenwood over touchscreen one nice
Love the mcm cloth you’ve got going on 😂 I’m hoping todo this to mine soon as the radios been dead about 2 years cheers
Gotta love MCM!
Great job
Looks really nice!
Thanks! It's doing the job :)
Nice video thinking of doing the same did this affect your reverse sensors ?
Mine didn't have reverse sensors @@Fousyrdous
So, basically, you need to buy a harness adapter that goes between the car's original connectors and the after-market's connectors. I'll be doing this on a 2006 V70. I'd sure like to have the factory manual to see where all the bolts and screws are.
Yes, that's correct!
Is that small grey connector at 4:46 connected to the amp? I didn’t buy this adapter because I didn’t think I would need fm antenna as I’m installing dab but now I’ve got no audio? Any help would be appreciated thanks
I'm curious - where did you end up pushing all the wires in the back to? (bottom/sides/etc?) I've a double DIN Android Auto/CarPlay stereo with no cd player and I have to install it before I put the whole unit back in due to how it's being held in place. I can almost get it all the way back in but the top is not going back about the extra 1.5cm or so I need it to in order for it to "clip in" on the top and sit flush. I can't see where it's being held up unfortunately due to having to have the stereo already attached.
Is the PDC working after swapping the radio? I'm about to buy a new radio for my V70 2006 but not sure about this. Would be nice to still have it.
Hello,I have original amplifier under the seat,so how I get all speakers connected to the stereo unit? because noone cable comes up 😮
you need a 6-pin DIN to cinch adapter cable, you can see it at 4:31
@@josephklee213 any idea why the headunit turns on but no sound i have the din adapter plugged in with remote control connected etc but zero sound even on max volume
@@MonstaNachoz I have no idea sorry
Hello friends, in the video, there are two plugs that look the same, one is green and the other is black, which one connects the RCA audio to the factory amplifier? Thank you so much
Thanks for watching. Is that the black cable you see at 5:49 ?
@@TobyWhiteUK Yes, what is that cylindrical black plug for?
@@playerdvd7530 found put what it is?
@@mikkelhoffmannpedersen2009 no
@@playerdvd7530 sorry for the late reply, didn't get the notification... to tell the truth, I don't know if this kit bypasses the factory amp and just uses the built in stereo, if you wanted to use the Volvo factory amp that would probably need a different setup. I could be talking rubbish too. I have sold the car now so can't go back to check :(
In us ours come cut already
Cat says i got this watchout buddy
does this work on a volvo s60 2004?
Most likely if it's same model year, but best to double check vendors.
S60R niccccce
*V70R - same just the estate / station wagon version. Appreciate you watching and taking the time 😀
Never ending story, pff
Volvo radios and aftermarket stuff are so dumb i dont know y they didnt make it simpler
Me thinking I could do this 💀 XD
Thanks for sharing. I've got the same job to do in the next few days with the InCarTec fitting kit and a Kenwood double din stereo on my 2005 V70. Think I've already made it a daunting job in my head, but I'm too tight to pay a professional!! Fingers crossed. What were the screws you had to take the unit out again for because they needed fitting from the back?
The faceplate screws from the back, if that's what you're referring to - see 8:44