I run a g48 as my edc because it truly is a perfect fit for me in all senses of the word, my only drawback was the 10 round mag, and the moment shield released their s15 mag, I got myself 4 of them, and it elevated my g48 to near perfect status. I ran g19’s and g22’s as duty weapons both in my time with the Army and my time as a contractor overseas, when I transitioned to civilian, I kept my g19 as my edc, but found the g48 to be a hell of a lot more easier and comfortable to conceal.
@@arturopuebla4924 tbh for someone like myself that’s heavily into fitness and like to wear tight clothes, no, the g19 is really bulky and prints like crazy. I do edc it here and there when I’m wearing baggier clothes, hoodies, jackets, but other than that, I run my g48 mos.
@@arturopuebla4924 yeah it is the best no doubt. I used it as a duty weapons for a long time, and it never failed me once. The only drawback is concealing it. Now, shield arms makes a 15 round mag for the g48 which is what I run.
Couldnt agree more. I carry 43x daily but something just didnt feel right, so i ended up ordering a 48 zafirri precision slide today. Ever since i seen the 48 i knew id like the longer slide. Im a 19 guy forsure just not my daily carry. I feel like 48 is a good compromise
Quite a touchy feely subject there....I know this is not a joking matter, and I know these sick fucks have a very hands on approach with their methodology, and of course because of this their methodology hits deep with a lot of people.
Hell, I bought the Shield mags BEFORE I bought the 43x. I was on the fence with the P365 and those mags sealed the deal. Just upgraded to the mos and looking forward to getting my swampfox red dot in the mail any day now.
S15 mags are the only reason I got the 43x over a p365. Wouldn't have bothered at 10rd, but 15 gets my attention. Put a few hundred rounds through the s15 mag this afternoon with zero issues. Also using shield arms steel mag catch.
Same! I was on the original pre-order for them and have my Gen 1s still. Bought the 43X for this reason and knew they were working on a steel 9 round mag for the G43 ages ago. Its done now. G43 holds 9+1 now.
I wouldn’t like a 10 round mag either if I could rip through 15 rounds in about 5 seconds. In reality a 10 round mag in a pistol this slim is perfectly fine to me.
@@quintinhagues7331 Shield Arms sells the steel mag catch. I carry a 43X with Shield Arms S15 gen2 mags and steel release. No issues so far. It doesn't look as clean fit as the stock mags, but it works.
People always worry about this. Yes if it’s in constant use it will wear out but they are super cheap and it’s easy to get a metal one or a replacements they don’t wear out as fast as people like to make it seem.
phil mckrotch I have 3 s15 mags I’ve put at least 1000 rounds no problems I think Yeager was talking about getting them dirty rolling on the ground with them and treating them like shit witch they do in his class... but come on any normal person doesn’t do that to there mags
PK yes but California is the heart of it.. most nuts produced in the world. Leaders in milk. Keeps me busy. And you can’t complain about the weather it’s perfect.. and being two hours from the snow or the beach is a plus too.. I hate the politics here but I’m in a line of work that’s in high demand and pays well. And being able to take my family on a decent vacation two hours either direction is a plus..
I have a g48 with the shield arms 15 round mag and its definitely one of my carry guns. My 365 xl with 15 round mag is another. What cool shit did u do to yours taren?
I carry the 48 but haven't bought the s15 yet because it doesn't make sense running a glock with an aftermarket mag. The whole reason you get a glock is so you don't have to worry so much about malfunctions.
@@MRsolidcolor the steel only mag weighs less than the glock steel + polymer mag. Its a USA made and sourced mag with a lifetime warranty. Just try it.
When he shot the 20rd and said "ill kinda limp wrist it" then hit us with the "Heeey what're you doin" and then the "what'do you want" in the goofy voice straight sent me😂😂😂 Taran Butler is a great guy and a hell of a shot👌🏼
Nice on your video you were able to send them down 1 handed without a failure to feed im gonna have to figure out how i go about getting new ones because mine fail to feed when i shoot 1 handed
After 35 years and thousands of rounds through various Glock pistols, the Glock platform is my go-to defensive carry firearm. I love firearms of many types so not a "fanboy". But for serious purposes my experience has always brought me back to one Glosck or another over the years. NEVER had a mag related malfunction with stock Glock mags. I had high hopes for the S15 mags. On paper, they sound great after all. However, after a couple of mag related malfunctions with the S15 mags I'm a HARD no-go with them. And while the capacity advantage of the Shield mags looks awesome on paper, ANY decrease in reliability of my defensive firearms is unacceptable. I paid way too much for two S15 mags that are now just paperweights. Fine for range use, but who needs expensive mags for range use?? Good for stoppage clearance drills I suppose... 🤷♀ I'd NEVER trust my life to ANY aftermarket Glock mag. Magazines are the heart of any semiautomatic firearm. Factory Glock mags are the most reliable I have ever used in any firearm in well over 45 years of shooting. In my experience, deviating from a proven design for unnecessary capacity considerations is just not worth it.
I know it's a bit late to comment on this and you may already be well aware, but apparently if you're using the 15 round mags you're supposed to swap out the mag release to the metal on they sell so that it catches better. It says on the website that the metal mags aren't meant to be used with the polymer mag release.
I love when arrogant tacticool shooters talk shit about glock. You want to know why Glock stuck with their tried and true magazine design? Because it works. Reliably. I have the 48 and never had one malfunction in the first 2k+ rounds. When I finally got the shield S15 mags I started having problems. I got rid of the s15 mags and got rid of the malfunctions. Great idea, poor execution. I’ll stick with what works- 10 rounds of glock reliability.
Although James Yeager had a video saying in his classes the reliability of those Shield mags are NOT for personal defense. And apparently it was about all those mags that have come through his courses.
Yeager is not the final authority on all things ballistic. I know he professes to be. Beware anyone who dismisses offhand something that works(and works really well).
Yeager was commenting on the amount of failures he has witnessed in his classes. Apparently it was a consistent theme with the gen 1 mags. It’s a data point to consider
Yup. Ive carried the G43, G48, and G43X and the 43X is the perfect gun. Feel more comfortable with it than my G17 full size at this point because i spend so much more time with it.
I see a problem with a uncoated steel magazine rubbing against a polymer mag release. Over time this is going to wear on the polymer release and loosen the fit. I had an experience like this with a Kahr pistol. After the first shot the mag would drop out. I sent it to Kahr but they did nothing and returned it and said it was fixed which it was not.
They've had it from the beginning. A friend of mine got in on the pre-orders. He got 3 mags, 2 5rd extensions and the metal mag release. It was ordered September last year. He carries a 15rd mag in the gun and a 20rd for backup. The only negative to the 5rd extension is it's the same price as the mag. You do get a different spring with the extension though.
@@cool4186 It's been 9 months since my comment, and since then I've learned that Shield Arms mags are NOT to be trusted. But even if they could be, 9 rounds does not equal 10 rounds.
This guy in a gun fight: “I’ll just limp wrist it, left handed, with my eyes closed”. The other guy: “Hey, what r u doing?” This guy: “Bang bang. Bang bang bang.”
I love my 43x for carry and I carry an extra 20 rounder. However people complain all the time about the shield arms mags not chambering hollows properly. Never had it happen to me. Lot of hate videos on them
@@9unslin9er who says it’s one person that attacks you or breaks into your house. A video went out 3 days ago of a man getting swarmed by 5 armed men in a robbery. What about malfunctions? Capacity isn’t always about spraying rounds everywhere. I would take your comment and assume you have trained very little and have little to no knowledge of firearms.
@@9unslin9er Probably never going to unload any rounds on a person. What's your point? Doesn't hurt to have, and if you're having to deal with a drugged up individual, you may very well need 10+ rounds.
I have the M&P 2.0 4.25 and absolutely love it! Never had one malfunction and I trust that gun with my life. Here's a link to a good review ruclips.net/video/78NF_xIxIZA/видео.html
Aggression is a desirable characteristic in a fight to the death. That is what pistols are for. Denying your adversary the opportunity of putting lethal holes in your anatomy by putting holes in his before he can succeed. Right? Oh yeah, by the way- Jesus is the name of our Lord, and should not be used lightly. It is sacred.
This guys accent is totally that of a 17 year old high school blonde girl :..👧😆especially at the end when he was like “cmon Glock …like what are you thinking like you know what I’m saying..like totally “😂…
Hey Taran how about making a 15 round mag for glock 48 using taran tactical without the shield arms. that would be awesome too using the original glock 10 rounder with Taran tactical
Ewwwww! Wash those precious's "protector" with alcohol after every time you put it right next to your precious!😂🤣😂😳 so it won't stink when you fire your protector!🤣😂🤣😂😎 precious protector? That's a good one!
I have the S15 magazine once I've loaded 10 Rounds they start to move from front to back and once I've loaded 15 it sounds like a marble loose in the magazine also the 15th round doesn't show in the 15th window it's like the last five or six rounds or just rattling around in the magazine I have not shot it yet wonder if you had this problem
I don't see the problem at all run the mags see if they are reliable and if they are use them you are acting like you can't just switch back to the 10 round mags.....
Where other people criticise Glock I think they're smart. People have no idea what it would take for Glock to change the way they make mags. It would take a huge initial cost to change so they could mass produce. On the other hand a company like Shield Arms already held the patent for this style of mag. They were working on a Glock 43 mag when Glock released the 43x/48. When these were released Shield Arms shifted their focus to the 43x/48. The Shield Arms S15 was literally selling the 43x/48 for Glock to the point that you couldn't even find them for a while. Glock had to do nothing but produce guns the same way they always have. People always bitch about little innovation by Glock but the Glocks continue to sell. That's why they don't need to change. The aftermarket does it for them and Glock just keeps rolling in the money.
@Joe MacLean yeah I understand that it is a full double stack already. But I was looking at the magazines and it appears that the follower goes further down in the shield arms 15 rounder than in a normal 19 mag. Couldnt they make a spring that compresses more to allow a few rounds in?
@Joe MacLean ah i see. i totally spaced the fact that the extra space on the sides would more ammo to fit into the 43x/48 magazines. Thanks for clarifying. So if these mags prove to be reliable, would there be any point to run a glock 19 unless you are running a mrds or flashlight? I edc a glock 19 because its the smallest I can go to fit all of my fingers on the grip while also being able to use an rmr and x300.
@@christiandinero8083 you can get a Streamlight TLR-6 for the Glock 43x and 48. I believe you can also get the slide milled for a RDS. They also have threaded barrels available as well, which gives the 48 a slightly longer barrel than a standard glock 17
I would stick with the 15 rounders only with a metal magazine catch. My Glock 48 stock non MOS functions flawlessly with shield arms gen 2&3 magazines and metal mag catch all day in 15 round capacity. Some people are on RUclips claiming malfunctions after putting so much aftermarket stuff on the pistol.
Good to see you and hear you again brother, but no Stallone or Arnold voice? That is a sweet mag Shield Arms came up with, Glock will probably sell more G48's now. That was some crazy one hand no aiming, and rapid fire to boot. Have a great week!!
My only gripe with the shield arms mags is with mine if I breathe too hard the goddamn mags fall out of the gun. I've never accidentally dropped a mag on a draw, but these s15s fall out so easily when you hit the release it makes me feel paranoid. Not enough material contacting the release. And yes I have the shield metal release.
Get the new one it's steel and adds more contact. It came out about a month ago. On the sheild arms website. I have One and it works great. And won't wear out because it's steel.
“Unless you’re stuck in a state with a dorky ass 10 round mag.” 😂😂😂😂😂
As he's shooting in California 😂 but when you got juice it's okay I guess. I'm not mad lol
Maryland
Made me chuckle lol. Seriously it is some goofy ass shit
Jersey
MA
I run a g48 as my edc because it truly is a perfect fit for me in all senses of the word, my only drawback was the 10 round mag, and the moment shield released their s15 mag, I got myself 4 of them, and it elevated my g48 to near perfect status. I ran g19’s and g22’s as duty weapons both in my time with the Army and my time as a contractor overseas, when I transitioned to civilian, I kept my g19 as my edc, but found the g48 to be a hell of a lot more easier and comfortable to conceal.
So the 19 isn’t a good conceal carry
@@arturopuebla4924 tbh for someone like myself that’s heavily into fitness and like to wear tight clothes, no, the g19 is really bulky and prints like crazy. I do edc it here and there when I’m wearing baggier clothes, hoodies, jackets, but other than that, I run my g48 mos.
@@nomad_3373 I appreciate it. The g19 is appealing because they say it’s the best handgun. But the slimline seem so easy to pack
@@arturopuebla4924 yeah it is the best no doubt. I used it as a duty weapons for a long time, and it never failed me once. The only drawback is concealing it. Now, shield arms makes a 15 round mag for the g48 which is what I run.
Couldnt agree more. I carry 43x daily but something just didnt feel right, so i ended up ordering a 48 zafirri precision slide today. Ever since i seen the 48 i knew id like the longer slide. Im a 19 guy forsure just not my daily carry. I feel like 48 is a good compromise
Before he started shooting, I was like ‘why does he sound so arrogant?’. I realized after the first set
I was thinking the same shit I was like who the Fuck is this guy lol then he let the first set rip and I was like ohh Fuck never mind hahaha
This is john wicks master yoda...
This guy is one of the best
Taran Butler is the real deal. :) tarantacticalinnovations.com/taran-butler/
I posted before I read your comment and thought the same exact damn thing! Ok now I see I’m not the only one that thought that! Lol
"Dorky ass 10rd mag" lmaooooo
& he is in California 🤣🤦🏾♂️
In occupied NY you’d do more time for that 15 round mag than a child molester would do.
And even more time if it's loaded with JHP's
Quite a touchy feely subject there....I know this is not a joking matter, and I know these sick fucks have a very hands on approach with their methodology, and of course because of this their methodology hits deep with a lot of people.
Damn, keep fighting, good news from the future in the 9th circuit , lets see if it stands. Caging people for excercising a right, true tyranny. ✊
Ironically the 3 strictest gun laws are California, Illinois and New York, which also are the 3 highest rates of gun violence. 🤔
Yeah but with one 10 rd mag you could take out 10 molesters.
"Ill kinda limp wrist it...hey wht are u doin" 😂😂😂😂
Made me chuckle as well.
He is a very weird man...
I bought my 43X knowing about the shield 15rd mag ahead of time. No issues at all-Love it
Hell, I bought the Shield mags BEFORE I bought the 43x. I was on the fence with the P365 and those mags sealed the deal. Just upgraded to the mos and looking forward to getting my swampfox red dot in the mail any day now.
S15 mags are the only reason I got the 43x over a p365. Wouldn't have bothered at 10rd, but 15 gets my attention. Put a few hundred rounds through the s15 mag this afternoon with zero issues. Also using shield arms steel mag catch.
Same! I was on the original pre-order for them and have my Gen 1s still.
Bought the 43X for this reason and knew they were working on a steel 9 round mag for the G43 ages ago. Its done now. G43 holds 9+1 now.
Precious little gun
I wouldn’t like a 10 round mag either if I could rip through 15 rounds in about 5 seconds. In reality a 10 round mag in a pistol this slim is perfectly fine to me.
Taran shoots faster and better from the hip than most do with a regular, traditional, grip. FACT
Thanks for tip on Glock accuracy. That was a really valuable info, thank you
Always great to see new Taran content, big ups brother
Im a simple man. I see Teran I click
I love how precious you make every video nowadays. You have really stepped up your preciousness.
Awww what a precious comment 😂
Revisiting videos on the Shield Arms mags because there are reports of failures in training classes and whether they are reliable under long term use.
Man Taran! Those mags are precious!
My wife's boyfriend had one of these and I convinced him to sell it and buy a blunderbuss! He sleeps on the couch now.
"Hey what are ya doin?" BANG
Don't forget to change the mag catch if you're staying with the S15 😉
Done
Is there any particular mag catch I should change to, or just anything other than the factory?
@@quintinhagues7331; it needs to be metal, not plastic, due to the mags being metal.
@@quintinhagues7331 Shield Arms sells the steel mag catch. I carry a 43X with Shield Arms S15 gen2 mags and steel release. No issues so far. It doesn't look as clean fit as the stock mags, but it works.
People always worry about this. Yes if it’s in constant use it will wear out but they are super cheap and it’s easy to get a metal one or a replacements they don’t wear out as fast as people like to make it seem.
I have a couple of the shield 15rd mags for my 43x. Really nice.
Yah that’s all I use, I put the 10 round mags away
But James Yeager says those shield mags suck, lots of failures in his class
phil mckrotch I have 3 s15 mags I’ve put at least 1000 rounds no problems I think Yeager was talking about getting them dirty rolling on the ground with them and treating them like shit witch they do in his class... but come on any normal person doesn’t do that to there mags
@@inyermouthbaybeh Yeager sucks.
Who in their right mind would live in California???
At least he doesn’t have to abide by their retarded gun laws.
I do.. cuz the agriculture. And I have the all the fire arms I need👍🏽
@@BIGREDTECH We also have agriculture in Free America.
PK yes but California is the heart of it.. most nuts produced in the world. Leaders in milk. Keeps me busy.
And you can’t complain about the weather it’s perfect.. and being two hours from the snow or the beach is a plus too.. I hate the politics here but I’m in a line of work that’s in high demand and pays well. And being able to take my family on a decent vacation two hours either direction is a plus..
Taran is in Nevada
I have a g48 with the shield arms 15 round mag and its definitely one of my carry guns. My 365 xl with 15 round mag is another. What cool shit did u do to yours taren?
How about the 365 12-rounder with Magguts +2?
@@shuumai i have a 365 also with a 12 rd mag but no magguts +3
I carry the 43X now. Can't wait to see your taran touch on these. I'm in the que!
I carry the 48 but haven't bought the s15 yet because it doesn't make sense running a glock with an aftermarket mag. The whole reason you get a glock is so you don't have to worry so much about malfunctions.
i carry the 43x and i do not plan on changing it. i dont want the weight and i don't change anything inside my guns
O..Okay!
@@MRsolidcolor the steel only mag weighs less than the glock steel + polymer mag. Its a USA made and sourced mag with a lifetime warranty. Just try it.
Agreed and from my experience with this aftermarket mag I’ll stick to Glock OEM in my carry gun.
I agree
I also wish that Glock would offer the 43x and the 48 with a rail on the front.
thelastjohnwayne they just came out with exactly that. I haven’t seen any in stock yet
TLR 6
When he shot the 20rd and said "ill kinda limp wrist it" then hit us with the "Heeey what're you doin" and then the "what'do you want" in the goofy voice straight sent me😂😂😂 Taran Butler is a great guy and a hell of a shot👌🏼
Didnt know about those. I'd still prefer a fist full of glock 19 rather than a slim grip.
This I would recommend for smaller hands.
The point of the 48 is that it was actually designed for the Canadian market. That’s the shortest barrel you can have on a handgun there.
They make the G19 with a slightly longer barrel specifically for canada. But yeah the 48 is a decent canadian EDC
How could you not just love TT!!!!
its TW for Taran Weinstein
Nice on your video you were able to send them down 1 handed without a failure to feed im gonna have to figure out how i go about getting new ones because mine fail to feed when i shoot 1 handed
Sir, we got a lil problem in Chicago that I think you could help with
Taran with anime music, cleaning up Chicago.
Always good to see Taran do work 🤘🏽
After 35 years and thousands of rounds through various Glock pistols, the Glock platform is my go-to defensive carry firearm. I love firearms of many types so not a "fanboy". But for serious purposes my experience has always brought me back to one Glosck or another over the years. NEVER had a mag related malfunction with stock Glock mags. I had high hopes for the S15 mags. On paper, they sound great after all. However, after a couple of mag related malfunctions with the S15 mags I'm a HARD no-go with them. And while the capacity advantage of the Shield mags looks awesome on paper, ANY decrease in reliability of my defensive firearms is unacceptable. I paid way too much for two S15 mags that are now just paperweights. Fine for range use, but who needs expensive mags for range use?? Good for stoppage clearance drills I suppose... 🤷♀ I'd NEVER trust my life to ANY aftermarket Glock mag. Magazines are the heart of any semiautomatic firearm. Factory Glock mags are the most reliable I have ever used in any firearm in well over 45 years of shooting. In my experience, deviating from a proven design for unnecessary capacity considerations is just not worth it.
I know it's a bit late to comment on this and you may already be well aware, but apparently if you're using the 15 round mags you're supposed to swap out the mag release to the metal on they sell so that it catches better. It says on the website that the metal mags aren't meant to be used with the polymer mag release.
Please God....make the future Glock 50....a 50 cal!!!!!!!!
Lmaooo it’s crazy cause the glock 45 is 9mm
And the g22 isn’t a .22lr, its .40s&w
But there is a glock .50 but its not in 50AE its in 50 GI which sucks
5.7
@@carlitosantana2859 patent numbers. For example the glock 19 was the 19th patent by glock
I've seen a lot of people saying they have problems with the S15 and Gen 5's.
CT only allows 10 round mags anyway so the G43X is perfect for me
Indeed precious little gun
I love when arrogant tacticool shooters talk shit about glock. You want to know why Glock stuck with their tried and true magazine design? Because it works. Reliably. I have the 48 and never had one malfunction in the first 2k+ rounds. When I finally got the shield S15 mags I started having problems. I got rid of the s15 mags and got rid of the malfunctions. Great idea, poor execution. I’ll stick with what works- 10 rounds of glock reliability.
Good insight, thank you for your expertise!
That mag is precious
Wish I could find these mags.
Im glad the Glock 48 is completely legal in Canada, definitely gotta get one
Good luck now...
Although James Yeager had a video saying in his classes the reliability of those Shield mags are NOT for personal defense. And apparently it was about all those mags that have come through his courses.
Yeager is not the final authority on all things ballistic. I know he professes to be. Beware anyone who dismisses offhand something that works(and works really well).
Yeager was commenting on the amount of failures he has witnessed in his classes. Apparently it was a consistent theme with the gen 1 mags. It’s a data point to consider
Great video! I personally think the 43x with the S15 is the best carry setup there is.
That’s all I seem to carry these days. 👍🏻
I agree, G 43x is my EDC pistol with a s15 mag
I agree. I cant find anything I like nearly as much
Yup. Ive carried the G43, G48, and G43X and the 43X is the perfect gun. Feel more comfortable with it than my G17 full size at this point because i spend so much more time with it.
I see a problem with a uncoated steel magazine rubbing against a polymer mag release. Over time this is going to wear on the polymer release and loosen the fit. I had an experience like this with a Kahr pistol. After the first shot the mag would drop out. I sent it to Kahr but they did nothing and returned it and said it was fixed which it was not.
That's why Shield Arms recommends changing it to a metal mag release.
Shield Arms sells a metal magazine release :)
My Glock 43x I had issues I was using shield arms mags not locking to the rear on empty mag
When did Shield Arms come out with a 20 rounder for the 43x and 48? I heard about the 15 but not that one.
They've had it from the beginning. A friend of mine got in on the pre-orders. He got 3 mags, 2 5rd extensions and the metal mag release. It was ordered September last year. He carries a 15rd mag in the gun and a 20rd for backup. The only negative to the 5rd extension is it's the same price as the mag. You do get a different spring with the extension though.
Not thrilled?
The glock 48 is *precious*
I’m saying
Florida Man Why is everyone saying this?
you should do more gun reviews like Hickok45, great video and amazing shooting
If you had to choose... p365 or G48 with 15 rd mags?
Either one is precious
I’d say P365. Mine has been flawless. You can always make a smaller gun bigger but you can’t make the G43X or G48 smaller.
P365 to carry, no doubt . G48 stay at home just next to the bed 🙂
Love the way that 365 looks....can I send nine in to get your touches or just order parts??
Only if you have the precious Taran seeks
All that needs to happen. Is for Shield Arms to copy the CR920, and make a 10rounder for the G43 (standard) with a 13-round backup. Make it happen.
They have a 9 rounder for the 43... The Z9
@@cool4186 It's been 9 months since my comment, and since then I've learned that Shield Arms mags are NOT to be trusted. But even if they could be, 9 rounds does not equal 10 rounds.
I would not want to get in a gun fight with this guy.
poormofo1 I wouldn’t want to get into an eating contest with him either.
You don’t have to. Give it some time and the diabetus will get him.
Why not? His targets don't move or shoot back. If he has to move he'll be gasping for air. He's nothing but a fat slob pervert.
I would not want to get into a gun fight
@Greg Chabot
100% 😂😂😂
Please do a video of you shredding targets with that wicked out 43x! Would be to see it in the next movie
This guy in a gun fight:
“I’ll just limp wrist it, left handed, with my eyes closed”.
The other guy:
“Hey, what r u doing?”
This guy:
“Bang bang. Bang bang bang.”
I love my 43x for carry and I carry an extra 20 rounder. However people complain all the time about the shield arms mags not chambering hollows properly. Never had it happen to me. Lot of hate videos on them
All due respect. You are NEVER going to unload 20 rounds on a person.
@@9unslin9er who says it’s one person that attacks you or breaks into your house. A video went out 3 days ago of a man getting swarmed by 5 armed men in a robbery. What about malfunctions? Capacity isn’t always about spraying rounds everywhere. I would take your comment and assume you have trained very little and have little to no knowledge of firearms.
@@9unslin9er Probably never going to unload any rounds on a person. What's your point? Doesn't hurt to have, and if you're having to deal with a drugged up individual, you may very well need 10+ rounds.
I’ve heard shield could have malfunction issues? Are these fixed?
maybe in gen 1 or 2, they are up to gen 3 now and hopefully fixed all the bugs
I have the 48 and love it.
Did you switch out your mag release?
And if so, can you still run the stock magazines with the shield arms mag release?
@@aaronmcbrayer1142 yes and yes u can run stock mags with aftermarket mag release.
@taran would you review the M&P 2.0? Preferably, the 4.25” model. Thanks
I have the M&P 2.0 4.25 and absolutely love it! Never had one malfunction and I trust that gun with my life.
Here's a link to a good review
ruclips.net/video/78NF_xIxIZA/видео.html
Great video, you earned my subscription.
“So I’m gonna test fire this thing- BANG BANG BANG BANG BANG . Jesus man why you so aggressive 😂
Aggression is a desirable characteristic in a fight to the death. That is what pistols are for. Denying your adversary the opportunity of putting lethal holes in your anatomy by putting holes in his before he can succeed. Right? Oh yeah, by the way- Jesus is the name of our Lord, and should not be used lightly. It is sacred.
He slowed down for the video. Haha
This guys accent is totally that of a 17 year old high school blonde girl :..👧😆especially at the end when he was like “cmon Glock …like what are you thinking like you know what I’m saying..like totally “😂…
Would like one with Ameriglo sights from factory.
Oh it is the truth
Nice video 👌 43x seems quite snappy though. FML I can see myself buying a G48, how do I justify this purchase??
Tell the old lady it's required for the job.
I sold my 43x. Just never really liked it. The 48 is a blast to shoot and I’m more accurate with it.
Good to know. Appreciate the video.
Hey Taran how about making a 15 round mag for glock 48 using taran tactical without the shield arms. that would be awesome too using the original glock 10 rounder with Taran tactical
I've never commented on your videos but I really wish I could give you 10 thumbs up just for the last 10 seconds of what you said
Looks amazing
How is this guy still around?
Dude is an excellent shot!
I carry mine next to my precious to protect my precious
Ewwwww! Wash those precious's "protector" with alcohol after every time you put it right next to your precious!😂🤣😂😳 so it won't stink when you fire your protector!🤣😂🤣😂😎 precious protector? That's a good one!
This man shot out so fast casually
I wish the mags were ever in stock
Get in on the backorder and wait. I just got mine yesterday. Waited about 8 weeks.
@@trifivegarage8683 did u just get 1?
Are those steel or polymer mags by shield arms
Steel. That's how they were able to squeeze 5 more rounds in there. Polymer mags have to be thicker than steel.
The limp wrist part 🤣🤣🤣
Lol, can hear the enthusiasm when you're talking about the Glock mag, omg
I have the S15 magazine once I've loaded 10 Rounds they start to move from front to back and once I've loaded 15 it sounds like a marble loose in the magazine also the 15th round doesn't show in the 15th window it's like the last five or six rounds or just rattling around in the magazine I have not shot it yet wonder if you had this problem
They do this. They will work fine. Same thing with mine. Have run hundreds of rounds through three S15's. One of them with a +5 now. No mag fails
Who cares what the do while on standby, as long as they come out as intended when needed?
name of the glasses ?please and thx.
Nice Range‼️
Imagine buying a gun known for reliability and then switching to aftermarket mags...
I don't see the problem at all run the mags see if they are reliable and if they are use them you are acting like you can't just switch back to the 10 round mags.....
Where other people criticise Glock I think they're smart. People have no idea what it would take for Glock to change the way they make mags. It would take a huge initial cost to change so they could mass produce. On the other hand a company like Shield Arms already held the patent for this style of mag. They were working on a Glock 43 mag when Glock released the 43x/48. When these were released Shield Arms shifted their focus to the 43x/48. The Shield Arms S15 was literally selling the 43x/48 for Glock to the point that you couldn't even find them for a while. Glock had to do nothing but produce guns the same way they always have. People always bitch about little innovation by Glock but the Glocks continue to sell. That's why they don't need to change. The aftermarket does it for them and Glock just keeps rolling in the money.
Or they could just be smart and contract MecGar to make the mags. Problem solved.
your shooting is very fast and amazing sheesh
What do you want by Taren tactical hip fire edition lol
what is the small pistol at 14 seconds that you are comparing the withe the glocks?
Sig p365
@@gerardo6104 thank you
New afro looks good
i see that chrome slide glock those worth a bit more now.
G48 with SA S15, my edc!
Followed by my p365X and my g26!!!
But would you trust an aftermarket magazine in a life-threatening situation?
2:56 What is he doing?
He's putting lead down range one handed like a Legend
So why doesnt shield arms make a flush fit mag like this one for the glock 19?
@Joe MacLean yeah I understand that it is a full double stack already. But I was looking at the magazines and it appears that the follower goes further down in the shield arms 15 rounder than in a normal 19 mag. Couldnt they make a spring that compresses more to allow a few rounds in?
@Joe MacLean ah i see. i totally spaced the fact that the extra space on the sides would more ammo to fit into the 43x/48 magazines. Thanks for clarifying. So if these mags prove to be reliable, would there be any point to run a glock 19 unless you are running a mrds or flashlight? I edc a glock 19 because its the smallest I can go to fit all of my fingers on the grip while also being able to use an rmr and x300.
@@christiandinero8083 you can get a Streamlight TLR-6 for the Glock 43x and 48. I believe you can also get the slide milled for a RDS. They also have threaded barrels available as well, which gives the 48 a slightly longer barrel than a standard glock 17
@@pbayers Holy shit tlr6 has fuck all output compared to that guys x300
If they'd ever make some more
I would stick with the 15 rounders only with a metal magazine catch. My Glock 48 stock non MOS functions flawlessly with shield arms gen 2&3 magazines and metal mag catch all day in 15 round capacity. Some people are on RUclips claiming malfunctions after putting so much aftermarket stuff on the pistol.
Good to see you and hear you again brother, but no Stallone or Arnold voice? That is a sweet mag Shield Arms came up with, Glock will probably sell more G48's now. That was some crazy one hand no aiming, and rapid fire to boot. Have a great week!!
Odd, that I haven't 'subscribed' before. Done!
I fukn love the 48 w/ shield mags. I ditched my last 19, sold to a friend.
Do you think Glock would ever do a 5.7x28?
Issue with the SA mags are that they do not drop freely when ejected.
Your supposed to pair it with their mag release. The metal mag doesn't like the polymer mag release
I cleaned mine with Ballistol and they have continued to drop with no problem.
My only gripe with the shield arms mags is with mine if I breathe too hard the goddamn mags fall out of the gun. I've never accidentally dropped a mag on a draw, but these s15s fall out so easily when you hit the release it makes me feel paranoid. Not enough material contacting the release. And yes I have the shield metal release.
Get the new one it's steel and adds more contact. It came out about a month ago. On the sheild arms website. I have One and it works great. And won't wear out because it's steel.
agreed
Sights? Who needs sights! I'm Taran!
Some states have a ten mag limit
💯💯💯💯💯💯👍👍👍👍👍👍👍👍👍👍👍👍👍👍Thank you sir. For the information