Hobbyist CNC Router Tips and Tricks
HTML-код
- Опубликовано: 18 июл 2020
- Some tips and tricks that I have learned in my first couple years using a hobbyist grade CNC router. An easy way to home the machine with a multimeter, how to calibrate it's axes, and an assortment of other various tidbits of advice.
Support my work - / levijanssen
MillRight Carve King - tinyurl.com/y398vw2r
Multimeter - amzn.to/2ZDEwPt
Alligator Clips - amzn.to/2CHzFUD
Digital Calipers - amzn.to/2Wu3iQj
Chisels - amzn.to/30mRJeH
Deburring Tool - amzn.to/30f83xW
Disclaimer: I may earn an affiliate commission when items are bought through these links. - Наука
Nice - big thumbs up for the audio. If your multi meter has a continuity tester, it'd beep as the bit made contact with the work piece.
Thanks for sharing - good tips! I'd like to add some advice on workholding: Err to the side of caution when it comes to holding your workpiece. There is a LOT of vibration when cutting, and things have a tendency to come loose. It can be scary when it happens, and it's very disappointing to ruin your part in the last operation, just because it shifted on you. Adding an extra tab (also for the scrap inside a pocket) or an extra hold-down screw is worth the small effort to avoid bad surprises.
Listening to you and your pieces of advice is great and helps quite a bit! Cheers mate!
Great video, really helps those new to CNC
Great video man!
Awesome! Thanks for the tips!
I like you last point to not be to afraid of pushing it. I was so delicate with mine at the start and funny enough a lot of what I couldn’t do with it was because I was too conservative with feeds and speeds.
You can also set your meter to continuity test so that it will start beeping when you touch the work piece. Another way of finding the workpiece is to spin up the spindle and you will hear when the bit will touch the metal.
good job buddy, some usefull info for us that have never used one before
Keep up! Good video Greetings from ecuador
thanks for sharing! :)
yay, you got a new mic!
Hey, how is the coilgun goin along?
Hi. Would this machine cut a 16” x 3”
3mm thick carbon fiber chassis for an rc crawler?
Do you like your millwright CNC machine? I've been considering this particular machine or another one Genmitsu PROVerXL 4030 CNC Router I what do you think . Thank you
So which machine did you get?
I'm looking into the Millright also, trying to do some research on it.
Let me know. Thanks
Good video Levi, i'm plaanning for building a cnc just like the one in this video. How did you build this one?
millrightcnc.com/
I think they sell the machine as a kit or pre-built.
Cnc router ❤️