Hey I just want to say, I got one of these, it works as it should but I just encountered a major issue where I'm unable to drop the swing arm to remove the battery because the bracket left side bracket with the kickstand extends too far back. I would have to completely dismantle the pedals and shaft and literally everything just to have access and be able to remove the battery. So if you intend to remove the battery for travel purposes, think again. Please fix this issue 🙏🏻
Hi, in order to be able to remove the battery, you need to follow this 2 minute procedure: 1. Put the bike on a stool so that is supported by the bash guard area. 2. Remove the bicycle chain master link 3. Loosen (not remove) the lower screws on both left and right brackets 4. Remove the upper screws on the left and side 5. Let the side brackets + spindle kit hang down in order to give enough space for the rear swing arm 6. Do the normal battery removal procedure
The only designed flaw on this pedal kit is you wont be able to take out your battery unless you take out the whole pedal bracket which hits the swing arm to slide the battery out
Does it fit on the new mx5 pro talaria??? as well, if possible could you all make a design where we can take off the peddles and put on normal pags, aka a quick release so when the bike die you can easily swap to the peddle with just an one tool
I purchased the Power Pedal version of this Kit. How soon can we expect the Electronic Pedal Assist Kit Add-on for for Talaria xXx ? Is it possible to adapt the Sting R MX4 kit to the xXx ??
Hi! We should have the electronic pedal assist ready in about 1 month. The connectors are different so its not possible to fit the one for the Talaria R MX4
@@kaniwaba will the electronic pedal assist addon be applicable to the power pedal kit as an upgrade or will it be its own independent pedal kit? im asking because i want to get the electronic assist but dont know whether to wait or if i can install it as an upgrade to the power pedals.
will the electronic pedal assist addon be applicable to the power pedal kit as an upgrade or will it be its own independent pedal kit? im asking because i want to get the electronic assist but dont know whether to wait or if i can install it as an upgrade to the power pedals.
When switch is in position 1 or 2 and eco mode, bike is limited to mph to comply with ebike speed regulations. In sport ot goes faster and in position 0 bike has original power
We need a video of the pedals being used please
This is perfect cant wait to get the kit.
Hey I just want to say, I got one of these, it works as it should but I just encountered a major issue where I'm unable to drop the swing arm to remove the battery because the bracket left side bracket with the kickstand extends too far back. I would have to completely dismantle the pedals and shaft and literally everything just to have access and be able to remove the battery. So if you intend to remove the battery for travel purposes, think again. Please fix this issue 🙏🏻
Hi, in order to be able to remove the battery, you need to follow this 2 minute procedure:
1. Put the bike on a stool so that is supported by the bash guard area.
2. Remove the bicycle chain master link
3. Loosen (not remove)
the lower screws on both left and right brackets
4. Remove the upper screws on the left and side
5. Let the side brackets + spindle kit hang down in order to give enough space for the rear swing arm
6. Do the normal battery removal procedure
The only designed flaw on this pedal kit is you wont be able to take out your battery unless you take out the whole pedal bracket which hits the swing arm to slide the battery out
Does it fit on the new mx5 pro talaria???
as well, if possible could you all make a design where we can take off the peddles and put on normal pags, aka a quick release so when the bike die you can easily swap to the peddle with just an one tool
Do the pedals hit the bike stand ?
Will you make a bicycle seat kit for this?
Any plans to make a kit like this for the 79Bikes Falcon M?
Can you actually pedal the bike with this kit or is it just cosmetic?
Looks fun to install 😎
Does it come with the kit on it
I purchased the Power Pedal version of this Kit. How soon can we expect the Electronic Pedal Assist Kit Add-on for for Talaria xXx ? Is it possible to adapt the Sting R MX4 kit to the xXx ??
Hi! We should have the electronic pedal assist ready in about 1 month. The connectors are different so its not possible to fit the one for the Talaria R MX4
@@kaniwaba will the electronic pedal assist addon be applicable to the power pedal kit as an upgrade or will it be its own independent pedal kit? im asking because i want to get the electronic assist but dont know whether to wait or if i can install it as an upgrade to the power pedals.
can you use the pedal kits on the talariaxxx both offroad and road legal versions?
Why would you even need that on the road legal version?
will the electronic pedal assist addon be applicable to the power pedal kit as an upgrade or will it be its own independent pedal kit? im asking because i want to get the electronic assist but dont know whether to wait or if i can install it as an upgrade to the power pedals.
Hi! It will be an add on 👍🏻
Does anyone know how to make it go faster after my bike only goes 20 mph now
When switch is in position 1 or 2 and eco mode, bike is limited to mph to comply with ebike speed regulations. In sport ot goes faster and in position 0 bike has original power
Do u ship to the uk
Yes we do!
this pedal can not keep up w high speed
I just cut mine out ha 😂
?
🤣
Where do I order it
www.kaniwaba.com!
What does the side stand sensor do?
The gas lever shuts off, when the kickstand is down. Like a Sur Ron.
It will disable the throttle when the kickstand is down!
@@kaniwaba oh ok thank you, that’s what I was the thinking
How do I order it