Видео

will you make one for the eride pro sr

I suggest carefully using a torch on the peg brace bolts if they don't come out before trying to crank on them. Mine started to deform when I tried to loosen them, they have some super strong loctite now. I used a propane torch on very low heat very close to each bolt for ~15 seconds and then immediately loosened each one with a hex socket on a 3/8 ratchet. Being quick was important because after 4-5 seconds they would get stuck again. Make sure to keep the flame away from any wires or plastics. This worked great for me and no damage was done to the paint.

Is there a full pedal assist kit for the MX5 (just released) Or would the MX4 kit, fit the MX5?

Does this fit the new sting MX5 pro?

Is this peddle kit strictly designed for Surons ONLY?

Does it fit on the new mx5 pro talaria??? as well, if possible could you all make a design where we can take off the peddles and put on normal pags, aka a quick release so when the bike die you can easily swap to the peddle with just an one tool

mx5 kit?

Do the pedals hit the bike stand ?

Sup can ya put me a kit together for my Throne Srpnt? Surron LBX pedals are supposed to fit. Let me know I can pay asap!

So they are only Cosmetic and serve no real purpose other to appease and Fake Out the Cops, Park Rangers & E Ride /bike Haters? lol! Nice Video though. : )

Are you guys still selling this?

I lost the screws that went on the cranks - are they M10? and one is left threaded?

How the hell do you remove the brackets? Dude in the video just uses his hand! Lol I ordered the pedals, wish I could install them.

power pedal kit installed. Error code 37 shows when i switch to throttle only (Talaria Mx4). it only works in the two kaniwaba modes. Ive already added the extrension cable and replaced the throttle. yes, I've sent Kaniwaba multiple emails, to no avail. Please advise Side note: Despite this gentleman's best efforts, he made a few mistakes. watch multiple videos, do research, or forget the pedal kit. Bottom line, without Talaria throttle-only mode, top speed is achieved at a VERY slow pace, though it still does well at lower speed (eco/re-gen@4) up inclines. hey Kaniwaba, would you help a brother out? Please advise ASAP. thx...

anyone get an error 37 after install?

So the pedals are just for show yeah? Don't they make ones that were attached to the chain that you could use if your battery died ? I'm really close to pulling the trigger on one of these, the only thing I have to see about is if I can get some petals on it and pedals that may work that I could use once in a very blue moon and also if I can get an attachment so I can carry something on the back of the bike

I don't like the bicycle pedal look, but it makes it look more. Civilized for the streets when riding around people. It people don't want you to ride stuff like that around them. I understand.

What does the electric part of the kit do ? Is it just a throttle controller ?

I wonder if this fits eride pro ss.?

it is clear that you've replaced the mounting screws so its kind of shady of you to not let people know they will need heat to remove them or they will end up in the same situation as you having to replace stripped screws...

Been waiting for this to come to the eride

I'm just going to put the pedals on but not the sprocket in-between. Because Wisconsin state law's are retarded...

will you make a bicycle seat for this bike?

Wow, right on time as promised thank you 👍🙏

Wow as promised right on time , thank you 👍

FINALLY 🙌🙌🙌

could we just use a cadence sensor on free spinning cranks to move our bike?

After installing it as mention on the video, code 700 apeared. Throttle not working. Do you know the solution? When plugging normaly without kaniwaba, throttle work normaly. Seems like the kaniwaba controller does not work. Talaria MX4. All my connection are well made and as described on the video.

How do you reinstall the pegs without altering the whole setup? “YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT”

How do you reinstall the pegs without altering the whole setup? “YOU MAY EASILY CHANGE BETWEEN PEDALS OR PEGS WITHOUT UNISTALLING THE KIT”

Geometry left the chat

Does anyone know how to make it go faster after my bike only goes 20 mph now

?

Does it come with the kit on it

Does the pedal kit add any charge to motor seem like you could get more juice back doing that as opposed to re-gen only?

Some sort of gearbox pedal drive would be perfect

can you use the pedal kits on the talariaxxx both offroad and road legal versions?

🤣

Can’t find the spare cable I found the acceleration one but not the spare , do I need the spare one ?

Installed on friend's Sur Ron last night. The new kit is excellent, well-thought-out and well-made. The video is excellent, albeit slight difference with the new kit. But common sense saves the day. On a scale of 1-10 difficulty, while this takes a few hours, it is truly only a 6. Few notes: * If you can view the video and just "do the math" to convert .. flip the bike upside down! I think it's way easier. (The Sur-Rons are electric, no issue flipping them over -- no gas/oil leaks!) * When putting the first "jack shaft" sprocket on for the new version, DO NOT TORQUE IT DOWN as shown in the video! Positioning the pedal sprocket into the detents must take precedence for positioning of the jack shaft sprocket. * You do not need "power tools." This was kind of funny. * We were given two chains, we used the shorter one and it fit perfectly. Install it to line the sprockets up, tighten a bit, then remove the chain so you can more easily tighten the allen screws and set screws since the chain will be out of your way. I assume the second chain is a back up, with an extra link in case the shorter one is too tight. Make sure when you finish installing late at night that your headlight and taillight are working -- you are going to want to buzz legally down the street! One quick mod request if it were possible with the controller -- would it be possible to put a cruise control on? Say 5, 10, 15, 20, 25, 30 MPH? If Kaniwaba wants me to test on my bike, I'd be happy to since I want to install this on mine! By the way, we ride our Surrons mostly single track in the woods ... putting the pedal kit on opens a whole new dimension and tremendous value add to our awesome bikes!

Will it fit mx3?

Any plans to make a kit like this for the 79Bikes Falcon M?

Does the regen slow you down when pedaling or do you have to brake

Does the battery charge when pedaling

so they are non funtional just for looks and you know what else. genius move Talaria

I just cut mine out ha 😂

I cannot remove the pedals from the kit. I want to switch to pegs but it will not come off even though i unscrewed everything.

What in the California mod is this

Where do I order it

The only designed flaw on this pedal kit is you wont be able to take out your battery unless you take out the whole pedal bracket which hits the swing arm to slide the battery out