TALARIA Sting Power Pedal Kit V3.0 Installation Video
HTML-код
- Опубликовано: 10 окт 2024
- www.kaniwaba.com
PRODUCT INFORMATION
Carefully designed Pedal Kit for the Talaria STING.
What YOU get:
The Pedal Kit V3.0 for TALARIA Sting plus the Power Kit Add-on for TALARIA Sting Pedal Kits V3.0.
Strong. Left and right side brackets are made of a single piece to stand drops and tough conditions!
This pedal kit WILL propel your ebike. You get carefully designed sprockets to install on the gearbox's output shaft WITHOUT UNINSTALLING IT, a high quality freewheel with hub, and a 36 link bicycle chain with master link so you can easily install on uninstall!
Add the TALARIA Electronic Pedal Kit for faster speed when pedaling (available soon).
A pedal kit that lets your rear suspension WORK. The original pedal kit is located directly on the rear swingarm, therefore it does not spring your weight... you will feel the difference immediately going over obstacles, plus the turning is greatly improved!
Compatible with chain or belt drives
Plug and Play pedal kit fixed to the frame! You just disassemble the existing side brackets and install the pedal kit.
Easy setup. Adjust the kit to your bike using the stainless steel collars. You may easily change between pedals or footpegs (and you have three footpeg positions!), crank puller needed. Just install the footpegs or the cranks without removing the pedal kit, you can also remove the spindle. You choose!
Maintenance free. New design is maintenance free since it has sealed cartridge bearings.
Brace bar. Also works as a brace bar
Reduced wobble. Little to no wobble of the chain and improved in this V3.0, since it is not connected to the main drive chain, a common problem with the OEM kit.
Cranksets compatible. This kit is compatible with JIS square tapered cranksets, no major crank offset is required. If the crank has no offset, the maximum compatible length is 160mm. OEM Crankset is compatible.
Aluminium made in order to reduce weight. With a weight of around 5.0 Lb (2.3 kg). The spindle is made of stainless steel.
Durable Materials. Parts made of aluminum and stainless steel. It will last a long time. - Авто/Мото
Are you going to make one for the talaria xxx?
Yes will! Expected for late september!
power pedal kit installed. Error code 37 shows when i switch to throttle only (Talaria Mx4). it only works in the two kaniwaba modes. Ive already added the extrension cable and replaced the throttle. yes, I've sent Kaniwaba multiple emails, to no avail. Please advise
Side note:
Despite this gentleman's best efforts, he made a few mistakes. watch multiple videos, do research, or forget the pedal kit. Bottom line, without Talaria throttle-only mode, top speed is achieved at a VERY slow pace, though it still does well at lower speed (eco/re-gen@4) up inclines. hey Kaniwaba, would you help a brother out? Please advise ASAP. thx...
If I buy this will it work for law compliance..
What is the advantage of doing this? I also feel like this would not be good in Offroad conditions due to the main chain having play during Offroad use. Those 2 chains are way to close to each other . Can imagine that will be a big problem
It gets classified as an electric bike and not a motorcycle
it is clear that you've replaced the mounting screws so its kind of shady of you to not let people know they will need heat to remove them or they will end up in the same situation as you having to replace stripped screws...
I have an additional spacer/bushing with a set screw left over that your video does not show where this goes (or what the purpose of this is). Can you help me understand this part? You show this bushing in the beginning of your video.
Hi! Thar collar/spacer should be installed first, it should be between the gearbox and the bicycle sprocket. It is used to avoid the sprocket from sliding on the shaft.
I cannot remove the pedals from the kit. I want to switch to pegs but it will not come off even though i unscrewed everything.
Probably you need a crank puller! ruclips.net/video/5Nk2uf-D4Os/видео.html
Can you get further range if u use the pedal assist??
I do not believe it has pedal assist. there's no cadence sensor. It just makes it street-legal, so long as you limit the motor power.
Will these work on the new sting r?
Need to do some tests first!
@@kaniwaba How did the tests go? Looking to get this kit if it works with the Talaria MX4. Pls give us an update :)
Where can l buy this today ? Great video!!!!
Does anyone have a phone # of a company that sells just petal kit and not the electric part?
whats that bushing for which you mentioned at the beginning of the video after the bicycle chain sprocket?
Its spacer between gear box and bicycle sprocket.
Dose it work on the Talaria Sting R MX4
I’m installing one on my R. I installed on my SURRON. The R is way more involved and running into some issues with clearance… stay tuned.
Yes! www.kaniwaba.com/product-page/talaria-sting-r-mx4-electronic-power-pedal-kit-v3-0
Gdzie kupie ten zestaw
www.kaniwaba.com
In Russia, pedals on a moped make absolutely no sense. If the engine power is from 250 watts to 3999 watts, then it is a moped, regardless of the presence of pedals. To manage this, you must have rights of any category. Pedals are only needed for bicycles that can be powered by an electric motor with a power of up to 250 watts. If the motor power is greater, then it is no longer a bicycle.
Yeah but usa is shit. So buy the kit to make police feel better and not take you electric dirt bike... police will take it. I'm about to buy one. And end up in jail. Usa is shit