A little aggravating is an understatement trying to mount the Rc4wd stamped steel wheels. That being said i freaking love them beadlocks. I just mounted 1.0 hyrax tires on white Rc4wd stamped steel beadlocks for my scx24 bronco and the 1.9 chrome stamped steelies with 1.9 hyraxes as well
Late to the party but my son and I have twin Deadbolts and I am really enjoying your vids! This info was great. We have our first fun comp crawl at the LHS this weekend and will go with our stock trucks just for fun. I’ll upgrade a little as money permits but for now just servo and tires. This vid was a great help! Thanks for your work! 👍💪🤙🔥
I just got the super swampers and the white beadlock wheels, they look so good on my C10 lol, and they work good on rocks and mud and grass, very good all around performance. They are the soft compound and they stick very well to wood and rocks. 👍
@@jaycearnold9047 not much at all, i just did the tiny corner of the front wheelwell to make it angled slightly so when you steer it the tire doesnt hang up on the body.
@@jaycearnold9047 the width of the tread is a bit wider as the design is more squared off, the stocks are a bit rounder. As for track width id say probably 2-3mm on each side, not a lot. The center of the tire is basically where the body is.
Still awaiting a working charger because the one in RTR kit Only makes flashing lights! I definitely want to go larger tires simply for looks ,That what I can do until Horizon Hobby Get back in touch or charger Hopefully shows Up ASAP,I was happy to see a tire video, I got a million questions you helped clear up a lot about tires,Much Appreciated
Added the Patagonia's to my son's C10 replacing the stock tires and it came alive, mild lift over stock for approach angle help along with obstacle clearance and boy can he climb now. Did require some wheel arch trimming though.
I just watched this and have been been between alot of tires and after watching. Decided I'd go with the Goodyears. I've bough some treal wheels and hope they fit. Ive heard sometimes they do and don't. I'm new to the hobby and have an SCX24 C10 which I love and have alot of plans to upgrade. Thank you for the helpful video keep up the good work!
First off, thanks for making this video. I have a Deadbolt that is entirely stock aside from the brass wheel hubs, and I'd like to keep using them - the thing is, most if not all of these tires are sold unmounted. Would any 1" wheel work with these 1" tires? Not necessary new to RC but definitely new to micro crawlers and have only bought pre-mounted tires!
I recently bought my first 1/24th scale tires. Ended up getting two sets (8 tires) of RC4WD Goodyear Wranglers. I wanted a soft but not overly aggressive tread, and not too big to put in my Deadbolt and Enduro24. They are smaller than the stock tires on the Deadbolt, which look too big to me. And they are bigger than the stock tires on the Enduro24, which look too small to me. I also ordered, but haven't received yet, two sets of Treal beadlocks. I hope they fit... I messaged Treal before ordering on their web site asking them if a standard 1.0 tire would fit, and got no response from them at all. After a week of hearing nothing from them I ordered them anyway because I like how they look.
Cool, thanks for that. I wasn't sure since the Treal outside diameter is 1.22 inch and the inside diameter of the RC4WD tires is 1.00 inch. So both trucks don't have the same exact tires and wheels, I ordered one set silver / black beadlocks, and the other set silver / grey.
Nice. I have a customizable foam and weight kit for the 24's I'm working on. I already have 1.9" tire kits selling from Hobbytown, Cedar Rapids. Those little trucks need some real feel to them tires
@@deezway1169 okay, call hobbytown in Cedar Rapids Iowa....she doesn't have 1.9s listed yet. This next week I'm making the 24's sets a part of the product line. Gotta give her a call tho, let her know your interested, get some sets for your friends, cuz I'm just starting this company. I need my name out there,, and for people to try this set.. But, trust me, I have the best product. You'll love em. Leave hobbytown your info, I'll treat ya right man, probably call ya too just to see what you want for a Foam. Thanks for the support man!!!
@@deezway1169 Man, I help people that help me, once the kit is together in your tires, you'll be like holy crap!!!! Can I ask ya what you run for the 1.9
Can you do a video on your Ford truck? Make of it? Upgrades? I’m looking to get into this hobby with my son and want to pick something with upgrade options. Thanks.
@@deezway1169 which one is sticking more out? I dont to narrow the track of my little betty but still want nicer wheels and tires. Thanks for your answer!
I know these tire tests usually focus on how they grip rock. Have you any opinion for loose dirt use? I have a stock scx24 Deadbolt and ordered MT Claws. They seem like they would work better going forward in dirt than the Patagonia’s. Any ideas?
Great video! Do you know if you can glue the Patagonias on the stock jeep wheels I already put full send wheel weights in them and just want a better tire. What do you think?
How can you possibly have a MOA FCX24? MOA stands for "motor on axle" & the FCX24 does not have two motors, one each mounted directly to the front & rear axles.
@@deezway1169 Thanks. That seems fair. It'd be cool to see another comparison after you've got them and maybe the KR3s also as those are the tires I'm interested in. Thanks.
Hi, It seem the Wrangler and Patagonia have the same compound X2S3. But it seem you mention the Patagonia feel better. I would think the wrangler would be better due to being a hair taller. So they don’t feel the same at all?
Just picked up a set up rc4wd wrangler mt for my scx24 bronco. Is there a certain direction these should be mounted. It’s like they are all left side tires if you run them what looks like directional going forward.
This has been a big issue/argument I always put the big lugs to the inside. But there are guys that tell me that’s wrong to the point of calling me names. Lol I have ran them every option you can and they make no difference on these little tires on my course. So I would say do what you think looks good to you and enjoy the hobby!!
Your going to run into clearance issues with the mud slingers on a stock jeep. The Patagonia’s run great on a stock Jeep’s !! That is one of my favorite setups!
I haven’t had any issues as of now. My sons white jeep has stock motor and servo. He is not easy on it at all lol and no issues. But I have burnt up stock servos on stock set up so I would be looking to upgrade servo in future it makes a big difference in steering.
Would it be possible for you to send me measurements of the Rock Lizards? Those are the only ones I haven't been able to get my hands on, and I'd love to add those to my list - ccrcadventures.com/index.php/1-0-tire-comparison/
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I agree, the Milestar Patagonias are in my opinion the best out of the ones I've tried 👍
Love the Ford body.
Thanks! This video really helps to choose the right tire.
A little aggravating is an understatement trying to mount the Rc4wd stamped steel wheels. That being said i freaking love them beadlocks. I just mounted 1.0 hyrax tires on white Rc4wd stamped steel beadlocks for my scx24 bronco and the 1.9 chrome stamped steelies with 1.9 hyraxes as well
Late to the party but my son and I have twin Deadbolts and I am really enjoying your vids! This info was great. We have our first fun comp crawl at the LHS this weekend and will go with our stock trucks just for fun. I’ll upgrade a little as money permits but for now just servo and tires. This vid was a great help! Thanks for your work! 👍💪🤙🔥
Welcome!! Thank you for watching and taking the time to comment!
I just got the super swampers and the white beadlock wheels, they look so good on my C10 lol, and they work good on rocks and mud and grass, very good all around performance. They are the soft compound and they stick very well to wood and rocks. 👍
How much did you have to cut your body for them?
@@jaycearnold9047 not much at all, i just did the tiny corner of the front wheelwell to make it angled slightly so when you steer it the tire doesnt hang up on the body.
@@pieman12345678987654 alright thanks. Also how much wider are they then the stock wheels.
@@jaycearnold9047 the width of the tread is a bit wider as the design is more squared off, the stocks are a bit rounder. As for track width id say probably 2-3mm on each side, not a lot. The center of the tire is basically where the body is.
Thanks man. Good informations here it really help. I wish to saw them perform on a track!
The crawling course is amazing!!
Still awaiting a working charger because the one in RTR kit Only makes flashing lights! I definitely want to go larger tires simply for looks ,That what I can do until Horizon Hobby Get back in touch or charger Hopefully shows Up ASAP,I was happy to see a tire video, I got a million questions you helped clear up a lot about tires,Much Appreciated
Your welcome thanks for commenting!
Thanks for the information! I'm new to this and your video really helps
Great vid brother!!! I have picked up a few of these, but you can never have enough wheels and tires!!!🤘🤘🤘
Nice video. I just got some Wranglers (foolishly thinking it was the Scramblers back in stock), and have definitely enjoyed them so far!
They are a great tire. Not a bad mistake ordering them lol
Added the Patagonia's to my son's C10 replacing the stock tires and it came alive, mild lift over stock for approach angle help along with obstacle clearance and boy can he climb now. Did require some wheel arch trimming though.
I just watched this and have been been between alot of tires and after watching. Decided I'd go with the Goodyears. I've bough some treal wheels and hope they fit. Ive heard sometimes they do and don't. I'm new to the hobby and have an SCX24 C10 which I love and have alot of plans to upgrade. Thank you for the helpful video keep up the good work!
I love the Rock crushers and the Falken Wildpeaks, great overall grip
My top 3 1.0" crawler tires are ....
#1 / JConcepts - 1.0" Ruptures 60mm in Green compound
#2 OGRC - Crawler Tires 55mm (Hyrax clones) super soft compound
#3 / Injora - Comp Pins 55mm in S5 compound
First off, thanks for making this video. I have a Deadbolt that is entirely stock aside from the brass wheel hubs, and I'd like to keep using them - the thing is, most if not all of these tires are sold unmounted. Would any 1" wheel work with these 1" tires? Not necessary new to RC but definitely new to micro crawlers and have only bought pre-mounted tires!
Yes all 1 inch beadlock wheels should work. The Rc4wd tires comes with foams, but the axial tires do not.
Good content, was it filmed upside down or did I have too many beers?
I recently bought my first 1/24th scale tires. Ended up getting two sets (8 tires) of RC4WD Goodyear Wranglers. I wanted a soft but not overly aggressive tread, and not too big to put in my Deadbolt and Enduro24. They are smaller than the stock tires on the Deadbolt, which look too big to me. And they are bigger than the stock tires on the Enduro24, which look too small to me. I also ordered, but haven't received yet, two sets of Treal beadlocks. I hope they fit... I messaged Treal before ordering on their web site asking them if a standard 1.0 tire would fit, and got no response from them at all. After a week of hearing nothing from them I ordered them anyway because I like how they look.
Yes the 1.0 tires fit perfectly on the treal 1.0 beadlocks. It’s a nice combo!! You will enjoy!!
Cool, thanks for that. I wasn't sure since the Treal outside diameter is 1.22 inch and the inside diameter of the RC4WD tires is 1.00 inch. So both trucks don't have the same exact tires and wheels, I ordered one set silver / black beadlocks, and the other set silver / grey.
Yeah they fit perfectly
Hey! Where's the new vids?? I enjoy your content!!
Some people say brush wd-40 on the tire treads with a tooth brush and let set and it makes them soft.
I soaked some tires in wd40 and they swole the tires up. It help a little bit but as soon as they get dirty the traction is gone
Great comparisons man, good job 👍
Nice. I have a customizable foam and weight kit for the 24's I'm working on. I already have 1.9" tire kits selling from Hobbytown, Cedar Rapids. Those little trucks need some real feel to them tires
Yes I would love to try them out!!
@@deezway1169 okay, call hobbytown in Cedar Rapids Iowa....she doesn't have 1.9s listed yet. This next week I'm making the 24's sets a part of the product line. Gotta give her a call tho, let her know your interested, get some sets for your friends, cuz I'm just starting this company. I need my name out there,, and for people to try this set.. But, trust me, I have the best product. You'll love em. Leave hobbytown your info, I'll treat ya right man, probably call ya too just to see what you want for a Foam. Thanks for the support man!!!
I would like to try out the 1.9s as well!!
@@deezway1169 Man, I help people that help me, once the kit is together in your tires, you'll be like holy crap!!!! Can I ask ya what you run for the 1.9
What I run for 1.9? Not sure what your asking bro
I run with no body bui I love the patigonias on my jeep but on my rock racer it’s scramblers all day long due to size
Can you do a video on your Ford truck? Make of it? Upgrades? I’m looking to get into this hobby with my son and want to pick something with upgrade options. Thanks.
Yeah I’ll try to do that this weekend!
How about an independent look on your crawling table would like to build 1 myself 124th scale
I can do that!!
To be honest I would love to get the Patagonias for my Jeep but I really like the look of the fallen wild peak so I don’t know yet
I went with the Falkens purely bc its what I run on my "real" truck.
Thanks for the info! You deserve more credit
I run the ssd brass/aluminum rim and Patagonia milestar
Nice video
🔵🔵🔵👍👍👍😀😀😀😀🔵🔵🔵
Thks for sharing bro 😎 I’ve subscribed
Do the stock betty rocksters have an offset compared to the rc4wd stamped steel?
Yes
@@deezway1169 which one is sticking more out? I dont to narrow the track of my little betty but still want nicer wheels and tires. Thanks for your answer!
I know these tire tests usually focus on how they grip rock. Have you any opinion for loose dirt use?
I have a stock scx24 Deadbolt and ordered MT Claws. They seem like they would work better going forward in dirt than the Patagonia’s.
Any ideas?
Watch my other videos and look at my course. We run on all terrain besides mud. Not my thing
@@deezway1169 thanks
What kind of wheels are the ones mounted on the mudslinger tires?
Great video! Do you know if you can glue the Patagonias on the stock jeep wheels I already put full send wheel weights in them and just want a better tire. What do you think?
I’m not sure. I have only used beadlock wheels. I have watched other videos on glue requiring wheels and the tires fit fine.
Yeah I guess I'll just have a go at it and see if it works!
I don’t know if I should get the Patagonia’s, the MT Baja claws, or the Rock creepers. Have any suggestions on what I should get for my C10?
Whered u get the 78/79 ford body! Gotta get one!
This video hurts my head. I had to flip the screen upside down to watch it. Other than that good video.
What’s that buggy body? Looks great!
were did you get your gate mini flags?? just built my first course.we want to have timed runs on the course.
Made them out of wooden dowel rods and orange paper tape
@@deezway1169 thank you. thought you purchased them. nice job on the course that you made
Great video. Wondering, where did you get the rock racer body that looks that good for an scx24?
It came from Walmart I believe!
@@deezway1169 ok so you had to get creative to fit everything then I take it if it was a toy and not an Rc
It’s was an rc body rock racer was the name I think
my track is a bunch of logs in my backyard What would you suggest I use the stock jeep scx24
Patagonia’s all day!!
Just put mud stingers on my moa fxc24. Loving it. New video up comparing it to my scx24
How can you possibly have a MOA FCX24? MOA stands for "motor on axle" & the FCX24 does not have two motors, one each mounted directly to the front & rear axles.
Are the Patagonias and stock betty tires the same size?
Great informative video. What are your thoughts on the BFG KR3s and KM3s? How do you think they would compare to the other tires you’ve reviewed?
I have a set of bf g KM3 ordered they have been hard to get ahold of. I would like to try them before giving an opinion.
@@deezway1169 Thanks. That seems fair. It'd be cool to see another comparison after you've got them and maybe the KR3s also as those are the tires I'm interested in. Thanks.
Any info on the KM3 yet?
The real question is which one weighs more than or equal to a duck. Then we will know which one is the witch
Hi,
It seem the Wrangler and Patagonia have the same compound X2S3. But it seem you mention the Patagonia feel better.
I would think the wrangler would be better due to being a hair taller.
So they don’t feel the same at all?
Where did you get the rim on yours son jeep? (The dark green bead locked one)
They are Treal 22oz weighted beadlock wheels.
@@deezway1169 I just found them a few minutes ago, but thank you!
Hi what’s the biggest tyre for c10 without rubbing?
Just picked up a set up rc4wd wrangler mt for my scx24 bronco. Is there a certain direction these should be mounted. It’s like they are all left side tires if you run them what looks like directional going forward.
This has been a big issue/argument I always put the big lugs to the inside. But there are guys that tell me that’s wrong to the point of calling me names. Lol I have ran them every option you can and they make no difference on these little tires on my course. So I would say do what you think looks good to you and enjoy the hobby!!
@@deezway1169 Big lugs on the inside. Wtf man! Just kidding. Anyways thanks for getting back and I’ll mount what looks good to me I guess.
Want to see more videos !!!
Lol working on it!!
Cool video👍👍👍
some one know if thise wheels rims and tyres work on eazy rc 1:18 ? 7mm hex
Hello from southeast alaska do you have any stickers for my rock crawlers remote control
What are the first blue wheels I can not find them online
They are kinetic brand wheels with blue beadlock ring. Got these on eBay! Great quality wheels!
Are you coming back?
Lol yeah we’re coming back!! Got some new stuff we have been working on!
thanks for the video, very informative. Will the mud slingers fit on a jeep? oe better go with patagonia?
Your going to run into clearance issues with the mud slingers on a stock jeep. The Patagonia’s run great on a stock Jeep’s !! That is one of my favorite setups!
@@deezway1169 thanks! I will go with the patagonias.
What would u recommend. Patagonia’s, Baja claws witch I’m kinda ehh about or the boggers??
The Patagonia’s have not let me down!
Just picked up a scx24 bronco. Which of these tires are more the same size as the stock tires on the bronco?
So they are an odd ball size look at the 20 minute mark to see size comparison. The bronco comes with the nitto trail grabbler as well.
@@deezway1169 much appreciated.
My man you ought to get some Amazon affiliate links on your videos so you can make some cash on these vids!
How do the weighted treals go with the stock motor and servo?
I haven’t had any issues as of now. My sons white jeep has stock motor and servo. He is not easy on it at all lol and no issues. But I have burnt up stock servos on stock set up so I would be looking to upgrade servo in future it makes a big difference in steering.
😉👍💯
Which witch is which?
Do you run the patagonias with foams?
Yes!!
@@deezway1169 the ones that come with the tires?
@@skimpapa6417 yes they seem to work great for me!
What happened to your vids?
I would really like to know where you got that Ford body?
I made it from a plastic kit I bought at hobby lobby.
Cool thanks
Was it the AMT Firestone machoman Ford 4x4?
Yeah I think it was!
Witch which is which?
What do you mean? I have had several comments like this. Please fill me in. Thank you
Would it be possible for you to send me measurements of the Rock Lizards? Those are the only ones I haven't been able to get my hands on, and I'd love to add those to my list - ccrcadventures.com/index.php/1-0-tire-comparison/
Which
What?